-
Posts
19 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by Michael Robinson
-
-
You will only get the resolution that you TV is capable of supporting. I always use high quality cables.
-
You could use a USB drive.
-
You can run android 11 from docker.
Android can emulate everything batocera can if not more.
-
You will need to boot the board then insert the SD card.
-
-
CM4 and 3b have the same SOC.
-
lsusb should display USB devices.
-
Are you using proper cooling?
-
-
2 amp isn't enough to boot the board. wait for the 4 amp to arrive.
-
Use the dd command.
https://www.cyberciti.biz/faq/unix-linux-dd-create-make-disk-image-commands/
I also found this for booting from spi.
https://rhasbury.wordpress.com/2019/05/27/orange-pi-zero-spi-eeprom-based-nfs-boot/
-
if the emmc module is removable search for ubs emmc tool. then write emmc from desktop and reinstall on pcb.
-
Have you run sudo apt update && sudo apt upgrade?
-
If you have the ability plug a computer monitor into it, if it works it's settings on your TV. On my Roku if I remember correctly I had to set it to computer for that input.
-
Are these LoRa modules?
-
Are you sure that you are using the correct power supply?
-
What board are you using?
-
Are you using a Bluetooth adapter? The OPi5 does not come with wifi/BT.
Orange Pi 5B bootfs Armbian on eMMC
in Orange Pi 5
Posted
https://drive.google.com/file/d/1n_sMewTbbszuEFHhpL-dNqHBiOwUtdJT/view
Part 2.6