Michael Robinson

/_\ _ _ _ __ | |__(_)__ _ _ _ / _ \| '_| ' \| '_ \ / _` | ' \ /_/ \_\_| |_|_|_|_.__/_\__,_|_||_| v25.5.1 for Orange Pi Zero2W running Armbian Linux 6.12.23-current-sunxi64 Packages: Ubuntu stable (noble) Updates: Kernel upgrade enabled and 17 packages available for upgrade Support: DIY (community maintained) IPv4: (LAN) 192.168.***.***, 192.168.***.*** (WAN) ***.***.***.*** IPv6: *** Performance: Load: 11% Up time: 4 min Local users: 3 Memory usage: 24% of 1.93G CPU temp: 45°C Usage of /: 10% of 58G Commands: Configuration : armbian-config Upgrade : armbian-upgrade Monitoring : htop orangepi@orangepizero2w:~$ It boots into xfce wifi works, eth works and hdmi work. 2gb board with keyboard plugged into expansion board.

/_\ _ _ _ __ | |__(_)__ _ _ _ / _ \| '_| ' \| '_ \ / _` | ' \ /_/ \_\_| |_|_|_|_.__/_\__,_|_||_| v25.5.1 for Orange Pi Zero3 running Armbian Linux 6.12.23-current-sunxi64 Packages: Ubuntu stable (noble) Support: DIY (community maintained) IPv4: (LAN) 192.168.***.*** (WAN) ***.***.***.*** IPv6: *** Performance: Load: 4% Up time: 16 min Local users: 3 Memory usage: 45% of 971M Zram usage: 47% of 485M CPU temp: 46°C Usage of /: 11% of 58G RX today: 98 MiB Commands: Configuration : armbian-config Monitoring : htop *** System restart required *** Some packages require a reboot (gnome-shell) orangepi@orangepizero3:~$

https://github.com/armbian/build/

try: sudo apt update sudo apt install wireless-regdb crda

Can you share armbianmonitor -u

MCP2515 is a standalone controller that communicates via SPI so yes it is possible.

I occasionally add overlays with armbianEnv.txt. sudo apt update && sudo apt install hdparm

--network=host

I am seeing EOS under armbian-build. But it looks like it has a old vendor stable option. Visit https://github.com/armbian/build if you want to give it a try.

You could load up portainer and edit the container config. https://docs.portainer.io/start/install-ce/server/docker/linux This will give you a web based gui to deploy or configure your docker containers.

phys = <0x74 0x75>; reg = <0x00 0xfc000000 0x00 0x400000>; phandle = <0x22c>; dr_mode = "otg"; reset-names = "usb3-otg"; snps,dis-tx-ipgap-linecheck-quirk; On vendor should this "dr_mode = "otg" become dr_mode = "peripheral"; ?

. Some activity for the 4 lts. https://github.com/armbian/build/pull/7887

You may want to check out https://github.com/armbian/build You can make a custom build for your board.

i'm showing current download on rolling release @ 6.12.17

you can freeze kernel upgrades in armbian-config under updates.

You should be able to set the mac address manualy. Make sure you have the one you need written down or emailed to yourself. I would use sudo armbian-config and check all your networking setting and see what your options are for setting the mac. Also check for files in this directory: /etc/NetworkManager/system-connections/

have you tried rolling back the kernel? sudo armbian-config

Try Raspberry pi imager

Have you tried: sudo armbian-config

https://wiki.radxa.com/RockpiS/getting_started#Next_Step Section 8 Boots from SD or NAND.

What is the name of the image you are using? Is it an armbian image?

I always use mkdir -p

https://github.com/garywill/linux-router

What kernel version are you using and have you tried others? Do you have another machine that you can test the nvme on? Are you sure the drive is ok? Reinstall the nvme you may have connection issues. What amp output does it say on the charger?