Gunjan Gupta

Could you please reproduce the issue and then run `armbianmonitor -u` and share the link for the uploaded logs? I don't have a camera myself and I can't help until I see atleast the full oops message. Edit: Sorry it seems its still too early for me. Didn't saw your attached files. Going through the logs now will update in a bit.

Not a c++ person, but generally speaking you need to call sync after you do the write call to make sure its written to disk. Otherwise it will be help in memory.

@kriptonus Could you please try building an image from https://github.com/viraniac/armbian_build/tree/opi3 and see if that works?

Fix has been merged and will be included in next release.

Created jira for the issue and raised pull request for the same

Hi, I am working on enabling crust support in Armbian. A draft version of pull request is here. I have made the changes for the same. With my changes, crust compiles as part of building the image and gets bundled in u-boot. I can also see the following message from U-boot U-Boot 2022.10-armbian (Jun 14 2023 - 13:49:59 +0000) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: FriendlyARM NanoPi NEO DRAM: 512 MiB Core: 61 devices, 18 uclasses, devicetree: separate WDT: Not starting watchdog@1c20ca0 MMC: mmc@1c0f000: 0 Loading Environment from FAT... Unable to use mmc 0:1... In: serial Out: serial Err: serial Starting SCP... Net: SCP/INF: Crust v0.5.10000 eth0: ethernet@1c30000 starting USB... Bus usb@1c1a000: USB EHCI 1.00 Bus usb@1c1a400: USB OHCI 1.0 Bus usb@1c1d000: USB EHCI 1.00 Bus usb@1c1d400: USB OHCI 1.0 scanning bus usb@1c1a000 for devices... 1 USB Device(s) found scanning bus usb@1c1a400 for devices... 1 USB Device(s) found scanning bus usb@1c1d000 for devices... 1 USB Device(s) found scanning bus usb@1c1d400 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Autoboot in 1 seconds, press <Space> to stop and the following message is present in dmesg output [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 So I know that crust is getting loaded. I am not sure how I can test if its working as its supposed to be. I can use some guidance for the same. Thanks in advanced