Hi everyone,
So I am a real beginner with networking so I though I would buy this board for learning and messing about. But I cant get the switched 6 port Ethernet to work. It shows up with ip link:
root@armada:~#ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 0a:b2:e1:6c:82:2e brd ff:ff:ff:ff:ff:ff
3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 532
link/ether 00:50:43:25:fb:84 brd ff:ff:ff:ff:ff:ff
4: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 532
link/ether 00:50:43:84:25:2f brd ff:ff:ff:ff:ff:ff
5: eth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 532
link/ether 00:50:43:0d:19:18 brd ff:ff:ff:ff:ff:ff
6: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1
link/ipip 0.0.0.0 brd 0.0.0.0
7: lan1@eth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 00:50:43:84:25:2f brd ff:ff:ff:ff:ff:ff
8: lan2@eth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 00:50:43:84:25:2f brd ff:ff:ff:ff:ff:ff
9: lan3@eth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 00:50:43:84:25:2f brd ff:ff:ff:ff:ff:ff
10: lan4@eth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 00:50:43:84:25:2f brd ff:ff:ff:ff:ff:ff
11: lan5@eth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 00:50:43:84:25:2f brd ff:ff:ff:ff:ff:ff
12: lan6@eth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 00:50:43:84:25:2f brd ff:ff:ff:ff:ff:ff
I also can a assign an IP to eth1 and ping it, but i cant ping any thing connected with eth1.
I am running the latest vanilla version of armbian for the Clearfog Pro.
Help would be much appreciated.