PaceyIV

I think the watchdog have restarted my board this morning at 5.31 AM during battery recharge. Igor, your board is not available now. Do you have changed your ip address?

I modified my fstab according to the link that you provided me but I don't restart the board to apply the changes. I thought to apply at the first freeze, but with Armbian 5.32 the board is still up (uptime 7 days). The difference between Armbian 5.31 and 5.32 are only about cryptography?

My rootfs is on a sata hard disk. Here my fstab /dev/sda1 / ext4 defaults,noatime,nodiratime,commit=600,errors=remount-ro 0 0 /dev/mmcblk0p1 /media/mmc ext4 defaults 0 0 /media/mmc/boot /boot none bind 0 0 /dev/sda4 /media/data ext4 defaults,noatime,nodiratime,commit=600 0 0 /var/swap none swap sw 0 0 What value I have to put as commit interval? 1? I have to disable log2ram? How can I do it?

I bought the first one. Before upgrading to the last kernel the board was quite stable uptime from a week to month. With the link I send you I can see my rpimonitor using Tor.

By board is powered by and external 5V power supply that I bought from Olimex and there is also a battery connected to it.

Uhm...Now that I enable watchdog I retry to upgrade my server to the new kernel and uboot. In my case the board crashes when I don't use it, I don't think there is something that I can do to break it down. Do you enable log2ram? (How can I stop receiving mail from it by cronjob?) And do you use rpimonitor?

Your board is still alive?

I use my board as a web server, the load is very low. There is always on apache, exim4, rpimonitor, minidlna, samba and flexget. At night there is transmission and some script that mirror some directory on google drive and idrive.

Uptime of two days with linux-dtb-next-sunxi linux-image-next-sunxi linux-u-boot-lime2-next version 5.25. The board restarts now after I cat /dev/watchdog

Yes, I've upgraded from the last available. The kernel was 4.9.7.

The board crashed again after 16 hours The log is available here http://sprunge.us/UbYN

Ok, I've installed it now. I restart the board and I cross my fingers

I've upgrade armbian to 5.31, now I have 2 freeze in 2 days Here my log http://sprunge.us/gUeO

No, I don't install it because I don't find any information about it. I do apt-get update but I still see the linux-dtb-next-sunxi and linux-image-next-sunxi, both for version 5.27

Where I can read the changelog about the last armbian release 5.27? Github shows only 5.24 https://github.com/armbian/build/releases and on the docs 5.25 https://docs.armbian.com/Release_Changelog/