nowy1
Members-
Posts
16 -
Joined
-
Last visited
-
Tutorial S/PDIF output on NanoPI M1
nowy1 replied to AndrewK's topic in Reviews, Tutorials, Hardware hacks
Hello, is this the way to run spdif Ubuntu server - mainline kernel -
I have abrogated ability to rotate
-
This is the display, unfortunately, I can not change the resolution or rotate the screen http://www.waveshare.com/4inch-hdmi-lcd.htm
-
Hello How to rotate screen HDMI ? 4.7.3-cubox
-
Armbian_5.20_Cubox-i_Debian_jessie_3.14.79_desktop.7z hello, I am searching for the img Cubox where can I find it?
-
hello, or touch-screen also supports the armbian as plug in? and if you can control the brightness of the display?
-
Now it works and how to add to auto start? because now the system is booting up I have to enter: modprobe fbtft_device name = adafruit22a rotate speed = 90 = 48000000 fps = 50 GPIOs reset = 67, led 72, dc 195 busnum = 1 lights up the display and now fits: Framebuffer = / dev / fb2 startx
-
so far I've been able to run one of the link https://github.com/notro/fbtft/wiki root@cubox-i:~/RPi.GPIO_BP/homedisplay# FRAMEBUFFER=/dev/fb1 startx X.Org X Server 1.16.4 Release Date: 2014-12-20 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.16.0-0.bpo.4-armmp-lpae armv7l Debian Current Operating System: Linux cubox-i 3.14.79-cubox #7 SMP Wed Sep 14 22:56:30 CEST 2016 armv7l Kernel command line: root=/dev/mmcblk0p1 rootfstype=ext4 rootwait console=ttymxc0,115200 console=tty1 video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24,bpp=32 rd.dm=0 rd.luks=0 rd.lvm=0 raid=noautodetect pci=nomsi ahci_imx.hotplug=1 consoleblank=0 vt.global_cursor_default=0 quiet loglevel=3 Build Date: 11 February 2015 01:18:06AM xorg-server 2:1.16.4-1 (http://www.debian.org/support) Current version of pixman: 0.32.6 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.5.log", Time: Sat Oct 22 20:29:00 2016 (==) Using config directory: "/etc/X11/xorg.conf.d" (==) Using system config directory "/usr/share/X11/xorg.conf.d"
-
Kernel config file, TFT enabled. https://drive.google.com/file/d/0B5PY... cmdline.txt including TFT configuration. https://drive.google.com/file/d/0B5PY... I planned to create a patch, but I did not find the original RPi kernel source (3.6.y). I have the working copy of the modified kernel source, however: https://drive.google.com/file/d/0B5PY... Unfortunately, there is no schematic, however wiring is pretty simple: LCD0 - RPi SDO(MISO) - MISO/GPIO9, pin21 (common) LED - 5V through 1k resistor, pin 2 (common) SCK - CLK/GPIO11, pin23 (common) SDI(MOSI) - MOSI/GPIO10, pin19 (common) D/C - GPIO24, pin18 RESET - GPIO25, pin22 CS - CE0/GPIO8, pin24 GND - GND, pin 6 (common) VCC - 3.3V, pin 1 (common) LCD1 - RPi SDO(MISO) - MISO/GPIO9, pin21 (common) LED - 5V through 1k resistor, pin 2 (common) SCK - CLK/GPIO11, pin23 (common) SDI(MOSI) - MOSI/GPIO10, pin19 (common) D/C - GPIO18, pin12 RESET - GPIO23, pin16 CS - CE1/GPIO7, pin26 GND - GND, pin 6 (common) VCC - 3.3V, pin 1 (common)
-
How do you think did so to do the same with two displays?
-
It works but once you start the system must enter manually modprobe fbtft_device name = adafruit22a rotate speed = 90 = 48000000 fps = 50 GPIOs reset = 67, led 72, dc 195 busnum = 1 add an entry to the rc.local? if I can somehow view the desktop instead of the display on hdmi?
-
by typing: fbi -d / dev / fb2 -T 1 -noverbose -a 23.jpg using "DejaVu Sans Mono-16", pixelsize = 16.67 file = / usr / share / fonts / truetype / dejavu / DejaVuSansMono.ttf the display is not lit.
-
It installs in a minute and let you know, thanks for the help
-
czyli system Pobrałem? http://www.armbian.com/donate/?f=Armbian_5.20_Cubox-i_Debian_jessie_3.14.79_desktop.7z Armbian_5.20_Cubox-i_Debian_jessie_3.14.79_desktop.7z
-
Welcome to ARMBIAN Debian GNU/Linux 8 (jessie) 4.7.3-cubox after entering fbi -d / dev / fb2 -T 1 -noverbose -a mini.jpg using "DejaVu Sans Mono-16", pixelsize = 16.67 file = / usr / share / fonts / truetype / dejavu / DejaVuSansMono.ttf and nothing shows on the LCD backlight only