gleam
-
Posts
41 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by gleam
-
-
Oh no, sorry, MAC is the only thing working constant and correct. MAC is always the same, only the IPv6 is changing. IPv4 ist changing too bur this is matter of DHCP of a horrible router from Alcatel
I have to live with. How are IPv6 are made and what is the programm used for it?
-
Linux 2b8e 4.14.150-odroidxu4 #2 SMP PREEMPT Mon Oct 28 08:07:45 CET 2019 armv7l GNU/Linux
DB 10.5 updates and upgraded
High everybody
AAMOE the starting procedure brings very often a new address for local use. As XU4 should be reachable by some other machines automatcally withour searching seconds an seconds I wonder if DHCP6 could help, when
searching takes too much time and they already do have fixed IPv6 adresses and DHCP is disgusting.
So, how the IPv6 ist made in Armbian?
TIA
-
If there are owners of ODROID maybe someone woult like to give "nmon" a chance
-
Well I looked at https://linuxjourney.com/ carefully but by lack of all systemD commands it might be a little bit outdated, Routing is not worth to be mentioned as IPv6 never ist mentioned
-
On 12/19/2019 at 5:15 AM, gleam said:
AFAIK i really use often commands with systemctl and pure ip. Both are very useful. Especially "ip"for all problems with net.
systemD is worth to learn about
Ciao
Well I looked at https://linuxjourney.com/ carefully but by lack of all systemD commands it might be a little bit outdated, Routing is not worth to be mentioned as IPv6 never ist mentioned
-
sudo reboot Reboot try systemctl reboot
sudo shutdown now Shutdown try systemctl poweroff
systemctl restart gpm often needed with debian
- " - start, stop, .... program instead of /etc/init.d/program startm restart, stop
journalctl -b -p err Bootmeldungen, dazu nur die Fehlermeldungen wasaschaßis,
weil da haddascho gestiefelt --since-yesterday
journalctl --since=2012-10-15 --until="2011-10-16 23:59:59"
journalctl -u httpd --since=00:00 --until=9:30
journalctl /dev/sdc
journalctl /usr/sbin/vpnc
journalctl -o verbose -n
journalctl -xe
journalctl -b > /0/jounalctl-ge4-ox.txt journalctl -b > /7/journalctl_gd3_.txtsystemctl status tahoe-lafs.service
systemctl -t servicesystemd-cgls | less?
systemctl -asystemctl list-unit-files | less
systemctl -r
systemctl --failed
systemctl --nowsystemctl --message=ciao --halt
systemctl poweroff never --force
systemctl start sshdsystemctl status /dev/sda = systemctl status dev-sda.device
systemctl status /home = systemctl status home.mount
systemctl stop sshd@*.service
systemctl kill crond.servicesystemctl stop sshd
systemctl kill crond.service better than killall -9 or kill
systemctl enable example1
systemctl disable example1
systemctl disable ntpd.service '
systemctl stop ntpd.service
systemctl link /path/to/foo.service
systemctl status networking.service
systemctl list-units
'systemctl status bluetooth.service' and 'journalctl -xn'
ln -s /dev/null /etc/systemd/system/ntpd.servicesystemctl daemon-reload
BUT
systemd-analyze plot > /tmp/plot.svg fascinating!
-
As having to get along with old alcatel and debian
I come along with this script for DHCP is crap.
ip link set dev enp4s0 down
ip addr del 169.254.7.102/16 dev enp4s0
ip addr add dev enp4s0 local 10.0.1.1/24 broadcast 10.0.0.31
ip link set dev enp4s0 upFor the other netcard I have to add
ip route add default dev enp4s6 src 10.0.0.7 via 10.0.0.138
now everthing works fine here. Never use alcatel!
-
Learning never will be finished :)
-
Really nice!!!
Absolutly!
Thx:)
-
AFAIK i really use often commands with systemctl and pure ip. Both are very useful. Especially "ip"for all problems with net.
systemD is worth to learn about
Ciao
-
Hi Igor!
I have another question as I have again and again starting from the very beginning. USB-sticks are kept in mind by kernel by /dev/disk/by-uuid allthough it is not inserted and so the kernel crashes. All the work ist gone. I only think about copying the SD-card at a point, when all works fine for not allways have to start from the very beginning. Wouldn't it be a better thing to divide to emmc and SD-card? OK, if kernel crashes it wouldn't help either. It just because it is so disgusting. Do you have a better idea?
Odroid-XU4 Armbian-10 (I hate buster, it sounds like bastard :)
-
One should try reportbug - vim-common - and if this ist reported
version (2:8.0.0197-4+deb9u1) in debian stretch you are lost.
Start with apt pinning for
testing: 2:8.1.0549-1 and maybe it would help you.
Vim in debian stretch will not be repaired.
-
Does anybody ever get a solution for that problem?
In VT trying to mark something via pointer this is not possible while editing in vim
So I do "systemctl restart gpm" and pointer can mark text ........ BUT!
vim switches to "-- VISUAL --' and cannot be used any longer!
With arrow-keys one can go arround but all text is goin to be marked.
You have to press the escape key for quite a long time.
This is XAB extraordinary annoying behavior
I don't know if debian people are not willing to repair that or don's know how to do that.
I did make several reports but just get stupid answers.
Sorry for wanting to use: console AND vim AND gpm
-
well, some annoying behaviors, extremly annoying, really
do
ip link set dev enx001e06322b8e down
and then
ip addr show
ip link is up again !!!!!!!!!!
WHY? >8-0
Well try that, open a file, insert
ip --force link set dev enx001e06322b8e down
ip addr del 10.0.0.7/24 dev enx001e06322b8e
ip addr add dev enx001e06322b8e local 10.0.0.1/24 broadcast 10.0.0.255
ip -force link set dev enx001e06322b8e up
close it and make chown "file" 755 and now it is better
This is new in stretch ans idiotic.
BUT! did you change /etc/network/interfaces? I'm afraid it has to be changed too
a don't want to reboot now.....
-
something useful:
Howto get these mmcblk-crap
root@2b8e:/mnt# ls -lisa /dev/disk/by-uuid
total 0
12297 0 drwxr-xr-x 2 root root 160 Sep 27 20:58 .
9262 0 drwxr-xr-x 7 root root 140 Jan 1 2000 ..
13331 0 lrwxrwxrwx 1 root root 15 Sep 27 20:58 0000-3333 -> ../../mmcblk0p1
12298 0 lrwxrwxrwx 1 root root 15 Sep 27 20:58 1334d04d-7ea0-44b3-9dba-fbc34e9e9ccd -> ../../mmcblk0p3
11330 0 lrwxrwxrwx 1 root root 15 Sep 27 20:58 57f8f4bc-abf4-655f-bf67-946fc0f9f25b -> ../../mmcblk0p2
14781 0 lrwxrwxrwx 1 root root 10 Sep 27 20:58 6afd7d22-8f78-4e09-9214-7df7421b7c06 -> ../../sdb1
9291 0 lrwxrwxrwx 1 root root 15 Sep 27 20:58 7d408db8-5e88-4654-aaee-3e0d621c4fa1 -> ../../mmcblk1p1
14750 0 lrwxrwxrwx 1 root root 10 Sep 27 20:58 D303-6887 -> ../../sda1don't forget: mmcblk0p1 differs from mmcblk1p1
and:
find / .name mmcblk0p3 :-D OKOK
find / -name mmcblk0p2
/sys/devices/platform/soc/12200000.mmc/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p2
/sys/class/block/mmcblk0p2Support isn't useful at all
-
As mentioned I still use a memorycard with D9,5 , but did get e repaired eMMS with android from hardkernel.
Now I made a look what's on to work with (file attached)
Most annoying c&p using Debian stretch vim and gpm, please use nano or D8 which is very old but works fine. Why old? Networkcard is still called eth. in D9 it is now end4s6 for instance an now en00(MAC) which is too long for many programs as sinfod.
And one again, never try IPv6. going back to IPv4 because of sone problems, nothing will work, no net, no armbian-config so please adopt that for your needs:
/etc/networking/interfaces
nano /etc/network/interfaces
# armbian-config created
##source /etc/network/interfaces.d/*# Local loopback
auto lo
iface lo inet loopback# Interface enx001e06322b8e
auto enx001e06322b8e
allow-auto enx001e06322b8e
allow-hotplug enx001e06322b8e
iface enx001e06322b8e inet static
address 10.0.0.1
netmask 255.255.255.0
network 10.0.0.0
broadcast 10.0.0.255
gateway 10.0.0.138
hardware ether 00:1e:06:32:2b:8e
dns-nameserver 127.0.0.1 194.183.128.35 194.183.128.36
dns-search atenx001e06322b8e I'm sure it is not yours
Kernels reads this in the very beginning.
to make changes use "ip". ip is strange but genious for it can be used for everything concerning nets.
So get accustomed to it now.
But just for the beginning:
ip link set dev enx001e06322b8e down
ip addr del 10.0.0.7/24 dev enx001e06322b8e
ip addr add dev enx001e06322b8e local 10.0.0.1/24 broadcast 10.0.0.255
ip link set dev enx001e06322b8e upnow as enx001e06322b8e is up now ask route -n and you might need:
route add default dev enp4s0 gw 10.0.0.138 but that is ugly so use
ip route add default dev enx001e06322b8e src 10.0.0.3/24 via 10.0.0.138
I don's not what to repair but IPv6 is completly distroyed.
-
Well, things are going on. This time IPV6 <-> IPV4 and DHCP.
As I mentioned my ADSL-modem is crap (ALCATEL). So switching to fixed address is not at all recommended. Here.
Coming back to DHCP doesn't, work. No IP no route, no relay (as the gateway should be called).
Also IPv6-address disappeared. No SSH possible of course.
And! eth0 is dead, enp4s1 ist dead, long live enx001234567890 where 1234567890 is the MAC
My IPv4 looks like 10.0.0.x\24 thr gx is 10.0.0.138.
Log in as root.
Eine Zeile ist Memory usage: 9 % of 1996MB IP: nitchewo, null, niente
you can put rthe following in a "script" without '#' and make it chmod "script" 755
#ip link set dev enx001234567890 down
#ip addr add dev enx001234567890 local 10.0.0.x/24 broadcast 10.0.0.255
#ip link set dev enx001234567890 up
#route add default dev enx001234567890 gw 10.0.0.138Then try ping 10.0.0.138 and ping or telnet 194.183.128.159 25 afterwards
X you have to start with startx, also as root it works
BEWARE: Don't try vim, gitfm, gpm, please, that's crap from Debian!
You only can use nano <wääähh> mc :-( gpm is OK then
Questions?
-
OK, OK, OK, OK No problems! :-)
Just experience. Mine. My XU4 is connected to VU7 Plus, nice. charming.
The startscreen when starting from a very beginning: The letters are really very small.
The VU7 is adjusted to 1200x720 but it is 1024x768
Adjusting the size of the letters one should have some experience in doing that.
Also in setting the keyboard.
I don't have good experience without DHCP on XU4.
Also not with IPv6 for the server doesn't support IPv6. (ADSL-Modem :->)
https://wiki.odroid.com/accessory/emmc/recovery_xu4 is very good
No problems.
Working with Configuration utility one can get lost without reading the "book" simultanously.
And here is some warning in "stretch' making stress: Copy&paste using vim in CLI is bad.
One has always be prepared for "systemctl restart gpm" or vim.basic will block XU4!
I always have a CLI with TOP to stop vim.basic.
People at debian don't repaire it I don't get out why not.
Is there anyone having experience with XU6 and Linphone?
That's for the moment and all the best for the work on armbian!
-
>systemctl disable NetworkManager.service
Nice!
Good hint!
But it needs not to be disabled for it ist gone :-)
>How inefficient is that !
Nor so much because it can't manage IPv6 which i'm going to use.
So I once will have DHCP never again. Never, never!
-
Good question .... I purged atop and still have top ... a miracle .... or something like that-
But I got rid off network-manager and it was a genious idea!
The DHCP of the alcatel-ADSL-mdem ist crap and the *****network-manager noticed each new IP got vrom the modem, didn't
know which one to use and resigned managing.
So I first stopped DHCP-client. a little bir better afterwards.
And finally purged network-menager, although some programs recommended it.
Every machine git its own static IP and now works perfect.
Next switching to IPv6 because neither the modem nor the ISP uses it.
-
Sorry but htop is ugly.
-
Hi all! :-)
To those who made the excellent work for my oroid!
Well done, very well done!
Well, just one point, maybe:
Sep 08 13:47:55 odroidxu4 systemd[1]: Starting Atop process accounting daemon...
Sep 08 13:47:55 odroidxu4 atopacctd[17567]: /run/pacct_shadow.d: File exists
Sep 08 13:47:55 odroidxu4 systemd[1]: atopacct.service: PID file /run/atopacctd.pid not…ctory
Sep 08 13:47:55 odroidxu4 systemd[1]: Failed to start Atop process accounting daemon.
Sep 08 13:47:55 odroidxu4 systemd[1]: atopacct.service: Unit entered failed state.
Sep 08 13:47:55 odroidxu4 systemd[1]: atopacct.service: Failed with result 'resources'.
Hint: Some lines were ellipsized, use -l to show in full.But "top" allready works fine so this might be a hint.
Another thing:
Raspian doesn't us this network-manager and is nuch easier for configuration.
Sorry for disturbing.
-
Did anybody ever successfully start a image like that start in virt-manager
or how to boot that anyway?
-
18 hours ago, tkaiser said:
Just as a reference: a new Hardkernel eMMC module is to be released/shipped next week: https://wiki.odroid.com/accessory/emmc/reference_chart#new_orange_emmc_module
The needed kernel quirk is already in our 4.9 kernel (just checked it) and I would believe the u-boot we're using is also ready....
First of all: Thank you. Thank you for your engagement!
Well then, I think I begin understanding.
From 0-2048 there is the place for HardkernelBIOS, or Odroid-MBR. No, not MBR, because
first is to check the medium via BIOS, a medium being bootable. Copying an MBR to
0-2048 cannot help because no medium for booting is known, cannot be choosen, there is
nothing being able to choose. Also not by the tiny switch. So 0-2048 never ever should be writeable, only for one time. And the emmc never ever could be repaired? Only when be
placed in the odoid? And it is lost for everything? Forever? With a dirty trick?
XU4 -- IPv6 -- builtautomatic
in Odroid XU4
Posted
Well, one might say, problem solved?
But curious enough, but building a local address shouldn't be too difficult only make a complete other one? And why?
Thank you at any rate