Mario Ernesto Villarreal

Yup, you're right, pal. Apologies if I used NAND... But no, your image doesn't recognize the internal eMMC, I had to use h3droid's kernel to recognize it

UPDATE: yup, the armbian kernel is not recognizing the NAND, because I have installed the kernel from h3droid, it boots and recognizes the 2nd MMC if inserted. EDIT: Well, at least it is booting, I hope there's a fix for a mainline kernel for this

Interesting, flashed back AGAIN the old image, but flashed your uboot, mounted and copied the sunvell file, and when booting, this appears: Starting kernel ... Error: unrecognized/unsupported machine ID (r1 = 0x00000000). Available machine support: ID (hex) NAME 00001029 sun8i Please check your kernel config and/or bootloader. Seems to be that the uboot doesn't have the machine id defined? EDIT: Manually setting machid in uboot with 1029 worked setenv machid 1029 saveenv But armbian can't find the emmc... is the kernel making troubles? Will check

I was doing it on the meantime... yup, it worked again, will try to recover it. Thanks!

Well.. tried to recover uboot writing to memory, and I made a rookie mistake hahaha and the sdcard is not booting. How many few times?

Well, initially, it hangs on: U-Boot SPL 2017.07-00494-g19d1f1a-dirty (Aug 30 2017 - 15:37:08) DRAM: 1024 MiB Failed to set core voltage! Can't set CPU frequency Trying to boot from MMC1 I am trying to check if I can reprogram uboot from here

It is not booting from the sdcard just soldered to the uart to try to fix it

Ok, I get it... the only problem is that now it is not booting from the SD, I think that is the problem with tat uboot. I think I need to attach it to a UART console and reprogram it

I did it on the internal eMMC, bro The SDCARD is not booting now, I'll check what I did wrong, but at leaste internal eMMC boot to uboot, boots Linux and then panicks (I think it is the UUID on the bootargs)

With the fex file, ti worked. I used the next command: wget --no-check-certificate "https://web.archive.org/web/ 20171210180447/http://kaiser-edv.de/tmp/NumpU8/Armbian_5.34_Sunvell-r69_Ubuntu_x enial_default_3.4.113_desktop.img.xz" -O - | pv | unxz | dd of=/dev/mmcblk1 And at least it booted, until it panicked hahaha. I am on the right direction, thank you!

Tried, didnt work (freezes at BOOTING KERNEL). I am installing H3Droid in this moment

eMMC still not recognized I am booting from the SD card btw.

Hey, bro! It's me, netomx from LET It is a pleasure to know you're working on this. Does this FEX file enables eMMC access?

Nice! So we need to recompile the kernel with the patch? https://github.com/armbian/build/pull/843/files

That should be easy to fix, with sunxi-nand-part, the hard problem is to make it recognizable

Mine has 470 ohms open and closed is short-circuit, but still has the same message. Do you think I need to patch uboot?

Sadly, I am using @tkaiser 's desktop image and I cannot see NAND or mmcblk1 internal image, botting with uSD