rusatch

Ok. Thank you. I understand this and do not demand anything from you. I admire what you do. I deal with most problems myself and ask for help only with what is not available to me. Recently I myself was engaged in support of some products and I understand that for problems it is better to contact those who are involved in support. I would like to help you, but I read your development topics and I understand that my knowledge is not enough. Sorry for google translate.

Thank you! Putting image, firmware, root and dtb from 20.11.3 getting system back. What can i do now? Always use kernel 5.9.14 and older? I dont understand what you meen. I use my orange pi for personal use only for domoticz.

Please help. Board: orange pi zero 2+ h5 Upgraded packages(from apt upgrade): Get:1 http://security.debian.org buster/updates/main arm64 libp11-kit0 arm64 0.23.15-2+deb10u1 [303 kB] Get:2 http://httpredir.debian.org/debian buster-updates/main arm64 tzdata all 2020e-0+deb10u1 [266 kB] Get:4 http://security.debian.org buster/updates/main arm64 nodejs arm64 10.23.1~dfsg-1~deb10u1 [87.3 kB] Get:5 http://security.debian.org buster/updates/main arm64 libnode-dev arm64 10.23.1~dfsg-1~deb10u1 [397 kB] Get:6 http://security.debian.org buster/updates/main arm64 libnode64 arm64 10.23.1~dfsg-1~deb10u1 [5,280 kB] Get:3 https://mirrors.dotsrc.org/armbian-apt buster/main arm64 armbian-config all 20.11.6 [44.5 kB] Get:8 https://armbian.hosthatch.com/apt buster/main arm64 linux-dtb-current-sunxi64 arm64 20.11.7 [81.8 kB] Get:7 https://mirrors.dotsrc.org/armbian-apt buster/main arm64 linux-buster-root-current-orangepizeroplus2-h5 arm64 20.11.6 [415 kB] Get:11 https://armbian.systemonachip.net/apt buster/main arm64 linux-u-boot-orangepizeroplus2-h5-current arm64 20.11.6 [273 kB] Get:9 https://minio.k-space.ee/armbian/apt buster/main arm64 linux-headers-current-sunxi64 arm64 20.11.7 [11.4 MB] Get:10 https://uk.mirrors.fossho.st/armbian/apt buster/main arm64 linux-image-current-sunxi64 arm64 20.11.7 [31.0 MB] Get:12 http://security.debian.org buster/updates/main arm64 python-apt-common all 1.8.4.3 [96.3 kB] Get:13 http://security.debian.org buster/updates/main arm64 python3-apt arm64 1.8.4.3 [179 kB] Upgrade without problems. After reboot:

It works, thanks.

Hi! After upgrade kernel from 5.8.13 to 5.8.16, i lost my OPi0+2, that was connected to lan via wifi. I plug usb-lan adapter and check that no wifi adapter detected. Link to armbianmonitor is attached. Then i switch kernel back to 5.8.13 via armbian-config and check wifi again. And i see that wifi steel unavailable. Is there reason that wifi module on OPi0+2 is lost? Sorry for my bad english.

My OPiZeroPlus2-H5 nice working with usb-ethernet dongle.

Works perfectly, thanks. Which overlay of this still actual? overlays=usbhost2 usbhost3 analog-codec w1-gpio gpio-regulator-1.3v cpu-clock-1.3GHz i2c0 i2c1 pps-gpio

Thank you. I will switch kernel to dev and test it.

I mean that usb works only with overlays with mainline and next kernel, as i know. I was try dev kernel earler, and usb did not available. I use OPi zero 2 plus with usb-lan dongle, and working usb for me is critical.

Hi. Is there overlays works on dev? I mean that as i know, overlays not works on dev and usb not available on OPi h5 with dev kernel. Or i missed something? )

@Anatolii Kraskovskiy try to turn off hdmi port with command: tvservice -o And turn on with command: tvservice -p If it work, you can use it with startup script. Also read this https://raspberrypi.stackexchange.com/questions/22039/turning-on-hdmi-programmatically-doesnt-work

Ну... Попытка - не пытка(russian joke) English: So... i tried to help.

There is a chance that he download old image with old dtb package that contains overlays for 4.14 kernel. Anyway i hope that soon we will know results

Тебе надо включить usb. Правь /boot/armbianEnv.txt и прописывай в overlays usbhost2 usbhost3 примерно так: overlays=usbhost2 usbhost3 После этого перегружай. Клавиатура и мышь должны заработать. English: You have to correct /boot/armbianEnv.txt by adding usb overlays like this: overlays=usbhost2 usbhost3 After that reboot. Keyboard and mouse should work.

@5kft, overlays works perfectly. One more time, thank you very mush! 05:28:52: 1296MHz 0.47 33% 10% 14% 0% 8% 0% 45.1°C 0/8 05:29:08: 1296MHz 0.43 5% 5% 0% 0% 0% 0% 43.3°C 0/8 05:29:13: 408MHz 0.39 0% 0% 0% 0% 0% 0% 39.4°C 0/8 05:29:18: 1296MHz 0.36 5% 5% 0% 0% 0% 0% 37.1°C 0/8 05:29:23: 408MHz 0.33 0% 0% 0% 0% 0% 0% 39.0°C 0/8 05:29:29: 408MHz 0.31 1% 1% 0% 0% 0% 0% 37.3°C 0/8

@5kft, very interesting. Thanks!

Ooh. With overlays its very usefull. Thank you very much. Its very cool! Today i recieve mosfets from aliexpress, used link that was in this thread. Tomorrow i will include mosfet on board and try use overlays. update: Found additional overlay named cpu-clock-1.4GHz. Is this experemental overlay?

Hi. The patch doesnt available. Is this correct?

Толян, у меня такая же плата. Несколько дней назад ставил последний доступный образ, все работало и до сих пор работает. Может действительно с uart адаптером запустить и посмотреть где спотыкается? ------------------- @Anatolii Kraskovskiy, i have same board. Few days it works with last image. May be uart adapter show more information?

Thanks! Now its build without errors

Get last commits with git pull, but still errors

Log from compile kernel without image using docker:

On Orange Pi Zero 2 Plus H5 with last updates 5.51 usb doesn't work anymore lsusb shows nothing usb-lan card doesn't work Update: gpio and i2c also unused. armbianmonitor -u http://ix.io/1gOP

Yes!!!

Works OK. http://ix.io/1dL9