Rosimildo
-
Posts
22 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by Rosimildo
-
-
On 10/19/2018 at 9:17 AM, TheMojoMan said:
Yes, Ethernet works!
Use meson-gxl-s905w-p281.dtb
Thank you! Yes, it worked!
The Wi-Fi module "ssv6051" is not available!
Thanks!
-
X96 Mini -- Does Ethernet works ?
Which DTB should I use ?
Thanks in advance!
R
-
On 8/5/2018 at 2:27 AM, jeanrhum said:
I'd like to give a suggestion!
I guess it would be very helpful, if someone could build a table with the Box model, the DTB file used, and the status.
-
9 hours ago, jeanrhum said:
I booted with 4.18 on my X96 mini as I claimed here:
I just downloaded latest 5.44 image (was the 20180727) from link provided in 1rst post of this topic. Then burnt it to an sdcard and use the dtb for p281 (copy it and rename it as dtb.img at the root of the fat partition as explained on the 1rst post).
Thank you!!! I made a stupid mistake. I changed the name of the dtb as: 281.dtb !!!
Naming it as it should: dtb.img, it worked!
R
-
3 hours ago, Rosimildo said:
HI all,
I've got a X96mini box, and I'd like to get Armbian with 4.18 running on it.
Could you tell me which version works ? I just need a headless device for now.
Thanks, Rosimildo.
I was able to install:
This image works:
Armbian_5.44_S9xxx_Ubuntu_bionic_3.14.29_mate_20180729.img
But, I have been unable to get any 4.18 kernel to load correctly.
I have read on this thread that some folks did it! Please share more info, thanks!
R
-
HI all,
I've got a X96mini box, and I'd like to get Armbian with 4.18 running on it.
Could you tell me which version works ? I just need a headless device for now.
Thanks, Rosimildo.
-
Have you checked which is the codec for the video ?
You could use media_info to check it, for example.
I know there are all kind of video encoding for this sample video.
R
-
1 hour ago, Loke said:
I have been using this orangepi for several years now. Today SSH stopped working (it would hang indefinitely after password prompt) so I decided to restart it by removing and re-plugging the psu cable. After that it never appeared on the network again.
1) the board lights up: green / orange light on ethernet, and one green light on MB that turns on for ~25sec then turns off for ~10sec
2) I connected it to two switches with multiple cables, none of them show the ethernet port as active (no light on the switch port)
Obviously due to 2) it doesn't appear on the router
3) microsd mounts fine on my pc, did a backup and flashed a clean image to no avail, will test the microsd later on.
Can this be caused by the PSU? or the Ethernet itself? Is there anything I can try to verify that?
Cheers
Most of the time that I had the OrangePI PC to die, it was the microSD card trashed.
-
Great News Igor got his Z28 running!
I have one getting dust here, until someone with more skills solve the Reboot and Ethernet MAC address issue ( random MAC ).
R
-
-
Hi all,
Do we know if the DT for Z-28 is really identical to ROCK64 ?
It seems folks are using a build for ROCK54, but I have not seen the DT files that describes this H/W.
R
-
Berni,
I have tried some of these "reboot" options, but none seems to work.
A thing that I observed is that the LED on top goes "blue", and stay that way.
During normal operation is kind of "orange" ( lightly ).
Reapplying power, it boots normally.
The bad news is that we can reboot from a script for example.
R
-
Searching google a bit, I think this issue is very similar to what this guy reported:
http://linux-sunxi.narkive.com/8Slp8vd7/allwinner-h5-orange-pi-pc-2-kernel-panic-using-dvb-t-key
-
I don't know if this info is necessary, but that is what I get when I use this grabber to encode some input stream, OPI-PC :
Linux orangepipc 4.11.7-sun8i #12 SMP Wed Jun 28 13:18:43 CEST 2017 armv7l armv7l armv7l GNU/Linux
Driver loads ok:
[ 9.158844] usbtv 4-1:1.0: Fushicai USBTV007 Audio-Video Grabber
[ 9.158931] usbcore: registered new interface driver usbtv
root@orangepipc:/opt# ls -l /dev/video0
crw-rw---- 1 root video 81, 0 Oct 13 13:35 /dev/video0
When it crashes:
--------------------------------------------------------------------------
[ 295.258775] INFO: rcu_sched self-detected stall on CPU
[ 295.265071] 0-...: (1 GPs behind) idle=6c9/140000000000002/0 softirq=6053/6053 fqs=1031
[ 295.273752] (t=2101 jiffies g=1886 c=1885 q=2148)
[ 295.278446] INFO: rcu_sched detected stalls on CPUs/tasks:
[ 295.278894] 0-...: (1 GPs behind) idle=6c9/140000000000002/0 softirq=6053/6053 fqs=1031
[ 295.278945] (detected by 1, t=2102 jiffies, g=1886, c=1885, q=2155)
[ 295.279400] Sending NMI from CPU 1 to CPUs 0:
[ 305.309817] rcu_sched kthread starved for 1003 jiffies! g1886 c1885 f0x0 RCU_GP_DOING_FQS(4) ->state=0x0
[ 305.309894] NMI backtrace for cpu 0
[ 305.310253] CPU: 0 PID: 138 Comm: kworker/0:3 Not tainted 4.11.7-sun8i #12
[ 305.310342] Hardware name: Allwinner sun8i Family
[ 305.310717] Workqueue: events dbs_work_handler
[ 305.311315] [<c010bad5>] (unwind_backtrace) from [<c01090df>] (show_stack+0xb/0xc)
[ 305.311724] [<c01090df>] (show_stack) from [<c0463c39>] (dump_stack+0x69/0x78)
[ 305.312121] [<c0463c39>] (dump_stack) from [<c0466117>] (nmi_cpu_backtrace+0x8f/0x90)
[ 305.312476] [<c0466117>] (nmi_cpu_backtrace) from [<c04661bb>] (nmi_trigger_cpumask_backtrace+0xa3/0xd8)
[ 305.312920] [<c04661bb>] (nmi_trigger_cpumask_backtrace) from [<c019c99b>] (rcu_dump_cpu_stacks+0x75/0x96)
[ 305.313418] [<c019c99b>] (rcu_dump_cpu_stacks) from [<c01606c5>] (rcu_check_callbacks+0x415/0x5d0)
[ 305.313844] [<c01606c5>] (rcu_check_callbacks) from [<c01628ed>] (update_process_times+0x25/0x44)
[ 305.314223] [<c01628ed>] (update_process_times) from [<c016f0f3>] (tick_sched_timer+0x2b/0x54)
[ 305.314604] [<c016f0f3>] (tick_sched_timer) from [<c016335b>] (__hrtimer_run_queues+0xd7/0x140)
[ 305.314964] [<c016335b>] (__hrtimer_run_queues) from [<c016356f>] (hrtimer_interrupt+0x7b/0x16c)
[ 305.315383] [<c016356f>] (hrtimer_interrupt) from [<c05d9527>] (arch_timer_handler_phys+0x1f/0x24)
[ 305.315893] [<c05d9527>] (arch_timer_handler_phys) from [<c0159e07>] (handle_percpu_devid_irq+0x4b/0xd8)
[ 305.316315] [<c0159e07>] (handle_percpu_devid_irq) from [<c0156c9b>] (generic_handle_irq+0x17/0x20)
[ 305.316701] [<c0156c9b>] (generic_handle_irq) from [<c0157057>] (__handle_domain_irq+0x3f/0x80)
[ 305.317056] [<c0157057>] (__handle_domain_irq) from [<c0101335>] (gic_handle_irq+0x39/0x6c)
[ 305.317382] [<c0101335>] (gic_handle_irq) from [<c0109925>] (__irq_svc+0x65/0x94)
[ 305.317515] Exception stack(0xc9c37bd8 to 0xc9c37c20)
[ 305.317696] 7bc0: 00000000 40000193
[ 305.318015] 7be0: 00000002 00009ad2 edc4b100 60000113 eeb7e400 00000000 eeb7e4d8 ffffe000
[ 305.318337] 7c00: 40000000 c0b02080 60000193 c9c37c28 c056c0f7 c0559728 60000133 ffffffff
[ 305.318744] [<c0109925>] (__irq_svc) from [<c0559728>] (__usb_hcd_giveback_urb+0x5c/0xd4)
[ 305.319164] [<c0559728>] (__usb_hcd_giveback_urb) from [<c0559803>] (usb_giveback_urb_bh+0x63/0x94)
[ 305.319580] [<c0559803>] (usb_giveback_urb_bh) from [<c011bb49>] (tasklet_hi_action+0x51/0xbc)
[ 305.319984] [<c011bb49>] (tasklet_hi_action) from [<c011bd57>] (__do_softirq+0xa7/0x1a0)
[ 305.320370] [<c011bd57>] (__do_softirq) from [<c011c059>] (irq_exit+0x8d/0xdc)
[ 305.320757] [<c011c059>] (irq_exit) from [<c015705b>] (__handle_domain_irq+0x43/0x80)
[ 305.320896] rcu_sched R
[ 305.321217] [<c015705b>] (__handle_domain_irq) from [<c0101335>] (gic_handle_irq+0x39/0x6c)
[ 305.321293] running task
[ 305.321569] [<c0101335>] (gic_handle_irq) from [<c0109925>] (__irq_svc+0x65/0x94)
[ 305.321700] Exception stack(0xc9c37d18 to 0xc9c37d60)
[ 305.321853] 0 8 2 0x00000000
[ 305.322034] 7d00: 00000083 00000001
[ 305.322461] [<c06f80c3>] (__schedule) from [<c06f876f>] (preempt_schedule_common+0x13/0x20)
[ 305.322856] [<c06f876f>] (preempt_schedule_common) from [<c06f87a3>] (_cond_resched+0x27/0x2c)
[ 305.322955] 7d20: fff95200 00004024 f0809000 c09142d4 042c1d80 00000000 10000000 0010624c
[ 305.323403] [<c06f87a3>] (_cond_resched) from [<c015fd0f>] (rcu_gp_kthread+0x357/0x6b0)
[ 305.323499] 7d40: 610333fe 0000003f 29aa5045 c9c37d6c c04ab0db c0163f8c 60000133 ffffffff
[ 305.323850] [<c0109925>] (__irq_svc) from [<c0163f8c>] (ktime_get+0x8/0xbc)
[ 305.324230] [<c015fd0f>] (rcu_gp_kthread) from [<c012c639>] (kthread+0xf5/0xfc)
[ 305.324646] [<c012c639>] (kthread) from [<c01060f1>] (ret_from_fork+0x11/0x20)
[ 305.324902] [<c0163f8c>] (ktime_get) from [<90001810>] (0x90001810)
-
yes, the driver for this H/W, I think was mainlined on 3.12 or something like that. 3.4 does not have it.
R
-
Let me clarify.
The device /dev/video0 is created ok. When I try to use FFMPEG to SW encode the stream, all 4 CPUs go to 100% and the system locks up, after 1 minute.
R
-
I tried this with Mainline kernel on OPI-PC ( 4.11.7 ), and it works for about 1 minute and locks up the system.
All 4 CPU go to 100%, and Eth0 stops working quickly.
I gave up on it.
-
TonyMac32,
Reading this thread, I've noticed you fixed the "reboot" issue with this Rockchip processor.
I have a Z-28 box, RK3328, and the reboot does not work.
Could you describe how you fixed, maybe the problem on the Z-28 is the same, and I could try it.
Thanks, R
-
@Berni,
Yes, when I issue a "reboot" command from the console, it hangs. I have to unplug the power supply from the board for a couple of seconds and power it again.
Unfortunately I don;t have a serial console or something like that to display any errors.
I think many of these options don;t apply to ARM, and since there is no BIOS/ACPI/PCI, etc.
R
-
thanks for all links. I will browse them.
rock64@rock64:~$ uname -a
Linux rock64 4.4.77-rockchip-ayufan-118 #1 SMP Thu Sep 14 21:59:24 UTC 2017 aarch64 aarch64 aarch64 GNU/Linux
I forgot to mention what works and what don't on the image I used, even though, I upgraded using the "apt-get" commands.
1. "reboot" does not work. It hangs, and a power off is required to restart.
2. Ethernet does not work, and "MAC address" changes on each reboot.
3. "Wi-Fi" is really bad, I need to place box close to the Router ( AP ). Something no more then 5m ( Chip is 8188 ).
-
I have got a Z28 board ( 8188 wifi ), and I have been able to boot Linux from SD card.
I used the image from the begin of this thread.
I'd like to help testing the VPU driver. Is there any built image with VPU enabled, and possibly with gstreamer/FFMPEG using the VPU capabilities.
No need for Mali stuff for now.
Any link with pointers would be nice.
Thanks.
Just a test
in Off-topic
Posted
What is more amazing is how "cheap" these boards and SOC providers are! They should be supporting projects like this, each with like US$ 5000/ month, which would be the low end cost of a resource, monthly!
I see developers like BOOTLIN and others going through Kickstart projects to collect some money and do wonderful things with little resources, like the last one about Cedrus!
Open source put a lot of pressure on the SW developers, while the H/W providers just expects "support" for free, while they sale their products and expect SW developers just to collect dust!
Hopefully one day, this state of affairs would change, since SW development is the most costly piece of any high tech field.