Baloven

Doubt, set themselves from CrazyCat - if will not find - write, I have written down somewhere the reference - search for laziness ..... here is the instruction taken from here (https://cesbo.com/wiki/linux/tbs-dvb?s[]=tbs#disable_auto_update_in_ubuntu_1604) should work on boxes as well

files *.dtb after copying to the root of the disk you need to rename to dtb.img if the download does not finish within 5-6 minutes, try another dtb file. PS the first time it is advisable to try to the dtb file at the root was not.

talraash you beat me to it dsh - higher (think 7-9 messages) Balbes I answered this question yet in the current it releases hardware decoding is not implemented,it is still testing.

hmmm this is strange, then wait for response Balbes150 - it is a lot of work spent to work that is hardware decoding. just in case, please specify which you have the box? processor? this information is primarily needed by Balbes150 and other gurus to help you faster.

I could be wrong, as I don't have that image, but I know the principle of work and we Balbes150 these questions on another forum were discussing. But You don't have to do anything. And to check where decoding is carried out-start the terminal and type the command "top" (without quotes) and enter in it. you will be shown the CPU load. after that, run any video on your desktop. download processare significantly must not be changed. PS I apologize for the mistakes, I write through a translator.

O-Ho-Ho read all the instructions I gave you, and the link to it is in the first message - there is nothing complicated. 1. first, write the image to a USB or SD card 2. in Android, run the script you specified 3. launch ARMBIAN from your device I'm sorry, I don't see the point in rewriting the entire manual. because there are some features. which there is described

This is good that the project is moving forward:) although I probably since March (as you did a test image with 4k more and not updated-no time )

DSH, Armbian images are not intended to be downloaded via USB BT. View the installation order in the previous sections (e.g. here https://forum.armbian.com/topic/2419-armbian-for-amlogic-s905-and-s905x/). Balobes150 Did I understand you correctly that I found a way to put kernels above 3.14 in NAND? PS and that with hardware decoding, and the everywhere silence

balbes - I already wrote that I need a maintenance-free system (with remote access). I'm just tormenting myself in trying to use hw. Maybe you can tell me in which direction to do the tests for me and where can I read the information on this topic? I'm sure that if I manage to solve my question, it will be useful to others. The shortest way, I understand it will be to understand the source code of KODI and understand their implementation of using GPU without x11, but so far I have not even managed to run KODI without x11

... insmod 8189es.ko (and 8189fs.ko) in the corresponding folders gives "ERROR: could not insert module: Unknow symbol in module" the result is the same - for all the above commands wlan0 does not appear .... there is no longer a desire to understand - I do not really need it - there is a usb-dongle

I'm probably just stupid. tried sudo modprobe dhd in response received: modprobe: ERROR: could not insert 'dhd': Operation not permitted and after its launch in lsmod "cfg80211 402688 0" since I do not know how to unload it - it rebooted. sudo modprobe wifi_dummy does not give anything to the console, but lsmod "wifi_dummy 814 0" appears ..... and what's next? nowhere wlan0 does not appear: (or am I doing something wrong or unfinished?

it all depends on your tasks and the use of boxing. if as a player - I'm sure that your current one, if configured properly - can even cope even on the S905W processor once you've already bought it (I would not buy it :)), judging by the reviews even about the 912 series - I so understand without a special you do not need to buy it - I doubt that you'll use its 8 cores completely. Ask those who actually used them and S905W (or at least X) and at the same time worked with the 912 series. In any case, it seems to me that this issue does not belong to the current topic of discussion.

... I'm confused - do you have a processor right now? S905W? PS In general, we seem to off topic: ( probably in another topic you need to ask a question!

S905W is a stripped-down version of the S905X processor - do you know this? Maybe you should buy S905X? processor fresh (in August only came out) I do not think that the price difference will be significant with the S905X This is my personal opinion - I do not insist on it. Only I warn you!

its a usb-dongle lsmod Module Size Used by zram 8689 4 rt2800usb 20752 0 rt2800lib 71326 1 rt2800usb rt2x00usb 9045 1 rt2800usb rt2x00lib 37351 3 rt2x00usb,rt2800lib,rt2800usb mac80211 459606 3 rt2x00lib,rt2x00usb,rt2800lib cfg80211 402688 2 mac80211,rt2x00lib mali 195053 0 aml_nftl_dev 82724 0 this is without dongle (only system + USB-flash) root@amlogic:~# lsmod Module Size Used by zram 8689 4 mali 195053 0 aml_nftl_dev 82724 0