Baloven
-
Posts
29 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by Baloven
-
-
files *.dtb after copying to the root of the disk you need to rename to dtb.img if the download does not finish within 5-6 minutes, try another dtb file.
PS the first time it is advisable to try to the dtb file at the root was not.
-
talraash you beat me to it
dsh - higher (think 7-9 messages) Balbes I answered this question yet in the current it releases hardware decoding is not implemented,it is still testing. -
hmmm this is strange, then wait for response Balbes150 - it is a lot of work spent to work that is hardware decoding.
just in case, please specify which you have the box? processor? this information is primarily needed by Balbes150 and other gurus to help you faster.
-
21 minutes ago, dsh said:
How can I hardware video decoder work?
I could be wrong, as I don't have that image, but I know the principle of work and we Balbes150 these questions on another forum were discussing. But You don't have to do anything. And to check where decoding is carried out-start the terminal and type the command "top" (without quotes) and enter in it. you will be shown the CPU load. after that, run any video on your desktop. download processare significantly must not be changed.
PS I apologize for the mistakes, I write through a translator.
-
O-Ho-Ho read all the instructions I gave you, and the link to it is in the first message - there is nothing complicated.
1. first, write the image to a USB or SD card
2. in Android, run the script you specified
3. launch ARMBIAN from your deviceI'm sorry, I don't see the point in rewriting the entire manual. because there are some features. which there is described
-
This is good that the project is moving forward:) although I probably since March (as you did a test image with 4k more and not updated-no time )
SpoilerRUS
Это радует, что проект двигается вперед хотя я наверно с марта (как ты сделал тестовый имедж с 4k больше и не обновлялся - времени нет )
-
DSH, Armbian images are not intended to be downloaded via USB BT. View the installation order in the previous sections (e.g. here https://forum.armbian.com/topic/2419-armbian-for-amlogic-s905-and-s905x/).
Balobes150
Did I understand you correctly that I found a way to put kernels above 3.14 in NAND?
PS and that with hardware decoding, and the everywhere silence
SpoilerRUS
Правильно ли я тебя понял, что нашел способ ставить ядра выше 3.14 в NAND?
PS и что с аппаратным декодированием, а то везде тишина
-
Spoiler
RUS
balbes - я уже писал, что мне нужна необслуживаемая система (с удаленным доступом).
Я как раз мучаюсь в попытках использовать hw. Может можешь мне подсказать в каком направлении делать мне тесты и где можно почитать на эту тему информацию? я уверен, что если мне удасться решить свой вопрос - то это будет полезным и другим.
Самым коротким путем, я так понимаю будет разобраться в исходных текстах KODI и понять их реализацию использования GPU без x11, но пока что мне даже не удалось запустить KODI без x11balbes - I already wrote that I need a maintenance-free system (with remote access).
I'm just tormenting myself in trying to use hw. Maybe you can tell me in which direction to do the tests for me and where can I read the information on this topic? I'm sure that if I manage to solve my question, it will be useful to others.
The shortest way, I understand it will be to understand the source code of KODI and understand their implementation of using GPU without x11, but so far I have not even managed to run KODI without x11 -
Spoiler
rus
... insmod 8189es.ko (и 8189fs.ko) в соответсвующих папках дает "ERROR: could not insert module (имя_файла_модуля): Unknow symbol in module"
результат тот же - по всем вышеперечисленным коммандам wlan0 не появляется.... больше нет желания разбираться - мне это не особо нужно - есть usb-донгл... insmod 8189es.ko (and 8189fs.ko) in the corresponding folders gives "ERROR: could not insert module: Unknow symbol in module"
the result is the same - for all the above commands wlan0 does not appear .... there is no longer a desire to understand - I do not really need it - there is a usb-dongle -
1 hour ago, balbes150 said:
modprobe dhd
or
modprobe wifi_dummy
This information was discussed many times in this thread and added to the first page of the topic.
SpoilerRUS
наверно я совсем тупой.
попробовал sudo modprobe dhd в ответ получил:
modprobe: ERROR: could not insert 'dhd': Operation not permitted
и после его запуска в lsmod "cfg80211 402688 0"
так как не знаю как его выгрузить - перезагрузился.
sudo modprobe wifi_dummy в консоль ничего не выдает, но в lsmod "wifi_dummy 814 0" появляется..... и что дальше?
нигде wlan0 не появляется или я что-то не так делаю или недоделал?I'm probably just stupid.
tried sudo modprobe dhd in response received:
modprobe: ERROR: could not insert 'dhd': Operation not permitted
and after its launch in lsmod "cfg80211 402688 0"
since I do not know how to unload it - it rebooted.
sudo modprobe wifi_dummy does not give anything to the console, but lsmod "wifi_dummy 814 0" appears ..... and what's next?
nowhere wlan0 does not appear: (or am I doing something wrong or unfinished? -
it all depends on your tasks and the use of boxing. if as a player - I'm sure that your current one, if configured properly - can even cope even on the S905W processor once you've already bought it (I would not buy it :)), judging by the reviews even about the 912 series - I so understand without a special you do not need to buy it - I doubt that you'll use its 8 cores completely. Ask those who actually used them and S905W (or at least X) and at the same time worked with the 912 series.
In any case, it seems to me that this issue does not belong to the current topic of discussion. -
... I'm confused - do you have a processor right now? S905W?
PS
In general, we seem to off topic: (
probably in another topic you need to ask a question! -
S905W is a stripped-down version of the S905X processor - do you know this? Maybe you should buy S905X?
processor fresh (in August only came out) I do not think that the price difference will be significant with the S905X
This is my personal opinion - I do not insist on it. Only I warn you! -
its a usb-dongle
lsmod
Module Size Used by
zram 8689 4
rt2800usb 20752 0
rt2800lib 71326 1 rt2800usb
rt2x00usb 9045 1 rt2800usb
rt2x00lib 37351 3 rt2x00usb,rt2800lib,rt2800usb
mac80211 459606 3 rt2x00lib,rt2x00usb,rt2800lib
cfg80211 402688 2 mac80211,rt2x00lib
mali 195053 0
aml_nftl_dev 82724 0this is without dongle (only system + USB-flash)
root@amlogic:~# lsmod
Module Size Used by
zram 8689 4
mali 195053 0
aml_nftl_dev 82724 0 -
Spoiler
rus
если подключить usb-донгл, то он появляется в lsusb, iwconfig, и можно настроить его в nmtui. Но RTL8189 - я нигде не вижу
eng
If you connect usb-dongle, it appears in lsusb, iwconfig, and you can configure it in nmtui. But RTL8189 - I do not see anywhere
-
iwconfig - on all interfaces there is no it - how else to look?
how to set the tag "hiden content"? -
Balbes150,
Rus
Spoilerкак писал выше - мне WiFi совершенно не нужен, но уже дело принципа
После установки (кстати на LE, AE, OE то же самое) не видит мой WiFi (на плате написано RTL8189 но накой из них нет данных) я перепробовал абсолютно все ваши файлы dtb - моя коробка (T95X 1/8 Gb) запустилась только на трех из них для 1g (p212, p231 и q201) так же копировал эти файлы из прошивок для с Android - с ними тоже запускается, но ни при одном из этих файлов я обнаружить wifi не могу или может неправильно ищу или что-то нужно сделать дополнительно?
в ядре есть файлы для 8189, но как их запустить?я меня есть usb-wifi он определяется как Bus 001 Device 003: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter и нормально работает, но лишь из принципа хочется разобраться со встроенным RTL8189 Wifi
Eng
as I wrote above - I do not really need WiFi, but it's the principle
After installation (by the way on LE, AE, OE is the same) does not see my WiFi (RTL8189 is written on the board but none of them is data) I tried absolutely all your dtb files - my box (T95X 1/8 Gb) was launched only on three of them for 1g (p212, p231 and q201) also copied these files from the firmware for with Android - they also start up, but for neither of these files I can not detect wifi or maybe I'm looking wrong or something need to do an extra?
in the kernel there are files for 8189, but how to run them?
I have usb-wifi it is defined as Bus 001 Device 003: ID 148f: 5370 Ralink Technology, Corp. RT5370 Wireless Adapter and works fine, but only from the principle you want to understand the built-in RTL8189 Wifi -
Balbes150 once again apologizing - the image works and thank you so much for the work done. The remaining 2 flash drives are excellent.
And maybe that ill-fated flash drive was on 2Gb and just did not have enough space to save the changes?
The question is almost not interesting to me, but still we will ask it. I have WiFi RTL8189 on my board (I do not know the letters) Ubuntu does not see it in any way, I assume that it's all about dtb.img - in what file can it be defined? the only one with which I have so far launched the system is gxl_p212_1g.dtb. tried so far only gxl_p212_2g.dtb - with it the system does not load8 hours ago, hillz said:Unlike other images, the ethernet on S9xxx_ArchLinux_20170914_3_14_29_KODI.img.xz is disabled, I can't ssh into it when I plug in my ethernet cable from my router to my tv box. Which file do I have to edit to enable it ?
You may have used a dtb.img file for your hardware, try changing
8 hours ago, hillz said:Anyway can someone recommend me a good tv box to use armbian on ? I want a box that is at least good for browsing the internet with chromium and watching movies at 720p. The one I have right now (tanix tx3 mini) is slow doing both of those tasks.
on the main page there is a description for what boxes the images work.
For your (in my opinion) should approach the images that makes Balbes150 -
Dear Balbes150 - I bring you my apologies, but you are not entirely right
I found the cause of the errors.
doing experiments and reading the documentation, I met messages that not all flash drives work.
I have 4 flash drives (2 of them with indicators), I wrote down your image for all 4 and experimented.
the first one on Transcent 32 Gb USB 3.0 - did not immediately work, at first I thought that I did not see what was happening on the screen, but yesterday it did not work at home, I thought that it's USB 3.0 and for this reason it can it's wrong to somehow perceive the box, I just postponed it.
the second (or rather, I started experiments with it, since it has an indicator on it and it was free) - that's it and the reason for my troubles is A-DATA my flash 8 Gb.
3-4 with them everything is fine
so I experimented on the second flash drive came to the conclusion that if at the end I did not perform the actions that I described, then after rebooting it was on it, it showed the mount error of the system - I do not understand why, but as root it works. further continuing experiments, I did all the same.
After reading your message, I decided to check your words, but I got a third (working flash drive) and it turned out. I decided to check again, but filling out all the data (i.e., not just pressing enter, but entering my data and my passwords) and again I got it - because it was 4 flash drive.
I did not believe the result, and since I already had some data saved on the second flash drive - I made a copy from it, recorded a clean image on it and repeated the installation - with the creation of the user - and here again there was an error. installing one more time the system - this flash drive and the other - the results are unambiguous - a flash drive for completely incomprehensible to me reasons does not work correctly: ( -
I found the cause of the error the first time I ran.
filling and adding a new user - results in an error on my t95x 1/8 Gb (I do not know why - it can only be me). For this reason, after changing the root password, press CTRL + C. If this is done from the box and the keyboard connected to it, then everything is fine, after pressing CTRL + C it is necessary to restart the box (enter "reboot"). And if, after the first start, connect via ssh and repeat all of the above, then pressing CTRL + C (at least in Windows PuTTY) causes the console window to close. Previously, I assumed that the session itself was closed and therefore not knowing what to do, turned off the power of the box and tried to start it again, which led to a system mount error. Now, I still could not find an alternative way to send to the PuTTY window CTRL + C, so it did not lead to the closing of the ssh session. only the first method of direct connection remains. I also managed to do it "blindly"
1. At the end of the download (the indicator on the USB flash drive stops flashing), enter "root"
2. Enter the password 1234
3. Enter the current password again 1234
4. Enter a new password so that he passed the password complexity rule
5. re-enter the password from clause 4
6. Press CTRL + C
... the system will wait for the login and password
... here you can already connect using ssh
7. enter root
8. Enter the password
9. Be sure to reboot to save the settings.
Ur can do what needs to be done next.
PS above I misled the line "echo 0 0 719 575 > /sys/class/graphics/fb0/free_scale_axis" - it turned out that it is not responsible for the coordinates of the output to the console, the displacement issue relative to the initial coordinates remains open -
editing the file hdmi.sh gives the output of the image after the start:
it is necessary to add a variable "mode" equal to "576cvbs"
and in the section "case" add lines with the settings for cvbs
for example:576*) fbset -fb /dev/fb0 -g 720 576 720 576 $bpp fbset -fb /dev/fb1 -g 32 32 32 32 32 echo $mode > /sys/class/display/mode echo 0 > /sys/class/graphics/fb0/free_scale echo 1 > /sys/class/graphics/fb0/freescale_mode echo 0 0 719 575 > /sys/class/graphics/fb0/free_scale_axis echo 0 0 719 575 > /sys/class/graphics/fb0/window_axis echo 0 > /sys/class/graphics/fb1/free_scale ;;;
714/570 is the size of the visible area of the console - for LCD screens, you can put 1 less than the resolution (ie 719,575), but for older kinescope TVs (my case) - you may need to reduce these values so that all information is is visible.
so the file hdmi.sh should look like:
#!/bin/sh #bpp=32 bpp=24 #mode=1080p60hz #mode=720p60hz mode=576cvbs #mode=576p60hz case $mode in 1080*) fbset -fb /dev/fb0 -g 1920 1080 1920 2160 $bpp fbset -fb /dev/fb1 -g 32 32 32 32 32 echo $mode > /sys/class/display/mode echo 0 > /sys/class/graphics/fb0/free_scale echo 1 > /sys/class/graphics/fb0/freescale_mode echo 0 0 1919 1079 > /sys/class/graphics/fb0/free_scale_axis echo 0 0 1919 1079 > /sys/class/graphics/fb0/window_axis echo 0 > /sys/class/graphics/fb1/free_scale ;; 576*) fbset -fb /dev/fb0 -g 720 576 720 576 $bpp fbset -fb /dev/fb1 -g 32 32 32 32 32 echo $mode > /sys/class/display/mode echo 0 > /sys/class/graphics/fb0/free_scale echo 1 > /sys/class/graphics/fb0/freescale_mode echo 0 0 719 575 > /sys/class/graphics/fb0/free_scale_axis echo 0 0 719 575 > /sys/class/graphics/fb0/window_axis echo 0 > /sys/class/graphics/fb1/free_scale ;; *) fbset -fb /dev/fb0 -g 1280 720 1280 1440 $bpp fbset -fb /dev/fb1 -g 32 32 32 32 32 echo $mode > /sys/class/display/mode echo 0 > /sys/class/graphics/fb0/free_scale echo 1 > /sys/class/graphics/fb0/freescale_mode echo 0 0 1279 719 > /sys/class/graphics/fb0/free_scale_axis echo 0 0 1279 719 > /sys/class/graphics/fb0/window_axis echo 0 > /sys/class/graphics/fb1/free_scale ;; esac # Enable framebuffer device echo 0 > /sys/class/graphics/fb0/blank # Blank fb1 to prevent static noise echo 1 > /sys/class/graphics/fb1/blank echo 0 > /sys/devices/virtual/graphics/fbcon/cursor_blink #/etc/webmin/start & #su -c 'hciattach /dev/ttyS1 any'
Balbes150, I understand your desire to make users at least a little read the documentation, but this is not in the documentation! And users far from all can understand the scripts and all the more very few of them in general are faced with Linux.
I suggest this option hdmi.sh include in your images, a little later I'll post the same file with comments so that it can be clearly seen in it for what each line answers - it is for users who first encounter OS Linux and in the future and do not plan these files to edit. Of course, these comments are needed for the images of the server version - only for images with X, if you so insist on the need for users of the server part of the ability to find solutions independently. But also to you the request - for that matter, do not say that the user did something wrong and give false directions without even understanding the reason. I understand that you have so many worries. But nevertheless sincere thank you for this work
Your tests and research done with your image of the system - I'll post here later. as the questions arise. I hope they will help you in some way.
Especially since there is an open question about the inclusion of CVBS initially for the output of console information !!! - for me it is now a bit not relevant, but the extent of the availability of time, I'll try to find the answer. -
18 hours ago, balbes150 said:
Scripts s905_autoscript only work with u-boot. To ensure that work team hdmi.sh - the system must be properly configured and running, it is a system service. Without a full system startup it doesn't work.
I already understood this, but it's unclear how to enable CVBS before the start, as far as I understand it's done just in the file aml_autoscript or somewhere else.
After all, before the start of downloading anything, it works with HDMI and CVBS !!! A further start disables CVBS. Where and what it turns off me is not yet clear. Also, no one explains how to turn it on during the installation, before initializing the installed OS.
I yesterday successfully launched your image and on the installed system switched to CVBS before rebooting (it is clear that having the installed system it is not difficult to include CVBS after the OS start), but how to make the installation process itself visible ??By the way, I did not start at all according to your advice. Absolutely nothing was multi-boot. Absolutely nothing was the password. Simply, the system generates some error in the process of creating the user and after reboot (after its creation) it does not load. I can not figure out the reason for that at work, where I can connect only CVBS - I can not see anything on the screen, and ssh disappears after restart !!! at home - I have HDMI and I got almost an operating system did not try to repeat the error with the creation of the user, and I can not connect to ssh because I have not figured out how to start WiFi RTL8189 on the box.
As a result, in the instruction It is necessary to write, that after the first loading It is necessary to press CTRL + C. -
as I understand it, it is possible to use the cvbs output of the aml_autoscript but nowhere could not find the description of commands. Attempts to enable it in the file hdmi.sh so far no to no avail - I actually blindly do everything. I have no way to control something.
-
5 minutes ago, balbes150 said:
1. Read carefully, that says system. It's not looping, and the requirement to use the correct password for user "root" (which does not pass the security requirements). Until then, until you enter the correct password, the system will not continue the setup.
2. Any partitions "system" is not used in Armbian.
???? a password of 12 characters including numbers, letters, @ and # is considered invalid????
Armbian for Amlogic S9xxx kernel 5.x
in General Chat
Posted
Doubt, set themselves from CrazyCat - if will not find - write, I have written down somewhere the reference - search for laziness
.....
here is the instruction taken from here (https://cesbo.com/wiki/linux/tbs-dvb?s[]=tbs#disable_auto_update_in_ubuntu_1604) should work on boxes as well