[Where is "default_trigger" set at boot for red LED Allwinner H5]

Thank-you, that did the trick!

[Where is "default_trigger" set at boot for red LED Allwinner H5]

Hi, I searched a lot, but no cure. I want to switch off the redLED heartbeat on an Allwinner H5 OrangePi zero+ under Debian buster. I can temporary echo it off, but it restarts again after boot. I want it off permanently. Rather than switching it off every time in rc.local, I want to eliminate the part, where its switched ON, but I can't find it.

[Zero H2+ OTG as device (not getty)]

Hi,

my 1st post  here.

I have serial over OTG between Win10 PC and Zero working, fine as long as I use it for console login. (serial-getty@/dev/ttyGS0.

If I stop the getty service, No usb/com port is opened @ PC side, when I plug it. I still see the /dev/ttyGS0 on the PI (stty -F/dev/ttyGS0) but apparently the device is not opened to the external world. I would expect that any send command to the device would open it,

 

e.g. ls > /dev/ttyGS0,

 

but nothing opens at the Win10 PC. What does getty do, so that the PC discovers the new usb serial connection and what do I have to do to achieve a device opening on the PC, not using getty on the PI? Obviously, I can only use putty on the PC, if a device to open exists!

 

RGDS

hk