Aurélio Radioamador

WOW!!! I'm very very very happy.. Problem solved. For Mainline, do this  1) alsamixer 2) press TAB (Make sure it falls to F4: CAPTURE) 3) Move to Mic1 (Use arrow keys) 4) Press SPACE and (L R Capture will appear) I just needed to enable LINE IN on alxamixer.

root@orangepizeroplus:~# arecord -f cd -D hw:0,0 -d 20 test.wav Recording WAVE 'test.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo arecord: pcm_read:2103: read error: Input/output error

Good Morning! I have tested here and found the following: The audio output is working perfectly. Only the microphone audio input is not working. And I need to use the microphone audio input from the card in my project.

And analog input ? You do test If work? Here not work input and output .. My board is Orange Pi zero plus and armbian 5.46 debian ...

Did you loaded the analog-codec overlay ? Hi Mr martin, I enabled analog-codec in armbian-config and i create asound.conf ... Should I do something else? Thanks reply.

Did you loaded the analog-codec overlay ? Hi Mr martin, I enabled analog-codec in armbian-config and i create asound.conf ... Should I do something else? Thanks reply.

What I find strange is that with the other 2 img linux official from Orangepi Resources (Ubuntu and Debian) the audio worked, however I do not want to use those linux images because I really liked the armbian.

Armbian is perfect, but the audio system I need most for my project does not work.

Do you want to try to access via ssh to my orangepizeroplus?

Thank for anwser , Mr. Guidol. But version 5.46 does not work analog-codec. On my Orange Pi Zero it was that way too. With the new version did not work the analog-codec, but with the old version 5.30 worked.

In version 5.30 is the sunxi-codec. Is not this problem? Can I use this audiocodec?

Yes, but the audio does not work. On my orange zero pi I had this problem I managed to solve using Armbian 5.30. But you do not have the Armbian 5.30 for Orange PI Zero Plus.

http://ix.io/1fa5 My armbianmonitor diagnostic

Hi Dear Friends! I'm having trouble using the onboard analog soundcard from my OrangePi Zero +. I already enabled analog-in in armbian-config, but when I try to run some application that uses the sound card, it has an error. In this example I'm trying to use the direwolf app that serves to decode FSK audio. The error also repeats when I try to use svxlink.

It worked perfectly with the older version of ARmbian. Thanks!!