-
Posts
25 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by Aurélio Radioamador
-
-
root@orangepizeroplus:~# arecord -f cd -D hw:0,0 -d 20 test.wav
Recording WAVE 'test.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
arecord: pcm_read:2103: read error: Input/output error -
Good Morning! I have tested here and found the following:
The audio output is working perfectly.
Only the microphone audio input is not working.And I need to use the microphone audio input from the card in my project.
-
4 hours ago, guidol said:
Test with espeak:
espeak -w /tmp/espeak.wav -s150 "Hello how are you today?"; aplay -D plughw:0,0 /tmp/espeak.wav 2>/dev/null
And analog input ? You do test If work? Here not work input and output ..
My board is Orange Pi zero plus and armbian 5.46 debian ...
-
27 minutes ago, martinayotte said:
Did you loaded the analog-codec overlay ?
Did you loaded the analog-codec overlay ?
Hi Mr martin,
I enabled analog-codec in armbian-config and i create asound.conf ...
Should I do something else?
Thanks reply.
-
26 minutes ago, martinayotte said:
Did you loaded the analog-codec overlay ?
Did you loaded the analog-codec overlay ?
Hi Mr martin,
I enabled analog-codec in armbian-config and i create asound.conf ...
Should I do something else?
Thanks reply.
-
What I find strange is that with the other 2 img linux official from Orangepi Resources (Ubuntu and Debian) the audio worked, however I do not want to use those linux images because I really liked the armbian.
-
15 minutes ago, guidol said:
why use an old 5.30?
there is a 5.46:
Armbian is perfect, but the audio system I need most for my project does not work.
-
Do you want to try to access via ssh to my orangepizeroplus?
-
2 minutes ago, guidol said:
why use an old 5.30?
there is a 5.46:
Thank for anwser , Mr. Guidol.
But version 5.46 does not work analog-codec.
On my Orange Pi Zero it was that way too. With the new version did not work the analog-codec, but with the old version 5.30 worked. -
In version 5.30 is the sunxi-codec. Is not this problem? Can I use this audiocodec?
-
23 minutes ago, guidol said:
Did you see your analog soundcard at
aplay -l
Did you create a /etc/asound.conf for the default soundcard?
Yes, but the audio does not work.
On my orange zero pi I had this problem I managed to solve using Armbian 5.30. But you do not have the Armbian 5.30 for Orange PI Zero Plus.
-
My armbianmonitor diagnostic
-
Hi Dear Friends!
I'm having trouble using the onboard analog soundcard from my OrangePi Zero +. I already enabled analog-in in armbian-config, but when I try to run some application that uses the sound card, it has an error.
In this example I'm trying to use the direwolf app that serves to decode FSK audio.
The error also repeats when I try to use svxlink.
-
It worked perfectly with the older version of ARmbian. Thanks!!
-
Hello Guidol!
I try here with ARMBIAN 5.30 stable Debian GNU/Linux 8 (jessie) 3.4.113-sun8i ...
Now it looks like it worked.
a few more minutes and put the results.
-
Before it worked properly with an old version of Armbian, after I updated it stopped working. And now with the Armbian website change I am not finding the download of the old armbian that I used.
-
# arecord test.flac
arecord: pcm_read:2103: read error: Input/output error
-
I tested it here and it still did not work. You are not yet playing the audio on the analog outputs (3.5mm jack).
-
all right .. i do create here and test ..
-
The /etc/asound.conf file does not exist.
it is correct?
-
# arecord -L
null Discard all samples (playback) or generate zero samples (capture) default:CARD=Codec H3 Audio Codec, Default Audio Device sysdefault:CARD=Codec H3 Audio Codec, Default Audio Device dmix:CARD=Codec,DEV=0 H3 Audio Codec, Direct sample mixing device dsnoop:CARD=Codec,DEV=0 H3 Audio Codec, Direct sample snooping device hw:CARD=Codec,DEV=0 H3 Audio Codec, Direct hardware device without any conversions plughw:CARD=Codec,DEV=0 H3 Audio Codec, Hardware device with all software conversions
-
Before enabling analog-codec in armbian-config:
# arecord -l
arecord: device_list:270: no soundcards found...
After enabled analog-codec in armbian-config:
# arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: Codec [H3 Audio Codec], device 0: CDC PCM Codec-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0but not play audio and not capture ..
Do you guys have any suggestions on what it might be?
Thanks!
-
Hi chwe!! thanks for u anwser ..
My Orange Pi running ARMBIAN 5.38 stable Debian GNU/Linux 9 (stretch) 4.14.14-sunxi ..
thanks ..
-
Hi Srs!
I have problem in using Armbian 14 with orange pi zero ..
I already used the Armbian system in my OrangepiZero. However, I reinstalled everything again and downloaded the latest version of the operating system here on the site. When I try to use onboard audio (both capture and output) does not work. I have already enabled the analog-codec and it still does not work.
Remembering that I already used the equipment with the Armbian and used the onboard capture of the board perfectly.Thanks!
Orange Pi Zero+ (Problem With Onboard Soundcard)
in Allwinner sunxi
Posted
WOW!!! I'm very very very happy..
Problem solved.
For Mainline, do this
1) alsamixer
2) press TAB (Make sure it falls to F4: CAPTURE)
3) Move to Mic1 (Use arrow keys)
4) Press SPACE and (L R Capture will appear)
I just needed to enable LINE IN on alxamixer.