martos
-
Posts
142 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by martos
-
-
-
In cpu only s912 la more powerfull only rk3399 have more cpu power. But rockchip give more information than amlogic to opensource ...
-
-
If you find it, could you reply on your post ?
What i know:
In open IT:
Amlogic not complet
exynos not complet
Rockchip is the best soc i know for transcode ( https://github.com/rockchip-linux/mpp )
Allwinner the code is in progress ( https://bootlin.com/ )
for other or not free :
(the Amlogic, an other ) and broadcom , Hisilicon ...
have a soc to make it, and i see some rack with a lot of card to transcode :
-
Yes ( i try all the keys) but the boot delay is at 0 so don't stop and i read with google :
"It is possible to configure u-Boot at build time so that it will ignore
any character from the console and always do autoboot. a u-Boot
configured in this way is used, for instance, for secure boot." -
For my version the boot delay it's put at 0, so i can't stop it.
I try CTRL+C to stop the u-boot but nothing, if you can find an option to stop it i can try.
-
It don't work well :
it use v4l2m m2m , it's not a complet use of vdu but and it's the same with the new hack of HW amlogic , less cpu but slow to transcode
For an only -vcodec copy it's works (kodi , ffplay ... ) BUT to transcode it's more quick in software
-
i try it tomorrow ...
-
ok escuse me
-
the boot with bionic-minimal-rock64-0.7.9-1067-arm64.img.xz ( it stop at the end )
SpoilerDDR version 1.10 20171106 In DDR3 333MHz Bus Width=32 Col=11 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=2048MB ddrconfig:2 OUT Boot1 Release Time: 2017-06-12, version: 2.44 ChipType = 0x11, 171 SdmmcInit=2 0 BootCapSize=2000 UserCapSize=7456MB FwPartOffset=2000 , 2000 SdmmcInit=0 0 BootCapSize=0 UserCapSize=15193MB FwPartOffset=2000 , 0 StorageInit ok = 226015 Raw SecureMode = 0 SecureInit read PBA: 0x4 SecureInit read PBA: 0x404 SecureInit read PBA: 0x804 SecureInit read PBA: 0xc04 SecureInit read PBA: 0x1004 SecureInit ret = 0, SecureMode = 0 LoadTrustBL LoadTrustBL error:-1 Raw SecureMode = 0 SecureInit read PBA: 0x4 SecureInit read PBA: 0x404 SecureInit read PBA: 0x804 SecureInit read PBA: 0xc04 SecureInit read PBA: 0x1004 SecureInit ret = 0, SecureMode = 0 LoadTrustBL No find bl30.bin Load uboot, ReadLba = 2000 Load OK, addr=0x200000, size=0x59ba4 RunBL31 0x10000 NOTICE: BL31: v1.3(debug):0ac3e1a NOTICE: BL31: Built : 09:14:58, Nov 15 2017 NOTICE: BL31:Rockchip release version: v1.3 INFO: ARM GICv2 driver initialized INFO: Using opteed sec cpu_context! INFO: boot cpu mask: 1 INFO: plat_rockchip_pmu_init: pd status 0xe INFO: BL31: Initializing runtime services INFO: BL31: Initializing BL32 INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-126-g2a74125 #46 Thu Dec 14 08:21:08 UTC 2017 aarch64) INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.4 INF [0x0] TEE-CORE:init_teecore:83: teecore inits done INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x200000 INFO: SPSR = 0x3c9 U-Boot 2017.02-RK3328-06-02632-g6d55d18 (Jan 24 2018 - 14:26:32) CPU: rk3328 cpu version = 1 CPU's clock information: arm pll = 600000000HZ general pll = 491519999HZ ddr pll = 664000000HZ codec pll = 1200000000HZ new pll = 594000000HZ Board: Rockchip platform Board Uboot as second level loader DRAM: Found dram banks: 1 Adding bank:0000000000200000(000000007fe00000) Reserve memory for trust os. dram reserve bank: base = 0x08400000, size = 0x01e00000 128 MiB GIC CPU mask = 0x00000001 SdmmcInit = 0 0 SDCard Update. storage init OK! Using default environment GetParam W: Invalid Parameter's tag (0x00000000)! Invalid parameter remotectl v0.1 pwm freq=0x23c346 pwm_freq_nstime=0x1aa No pmic detect. CPU's clock information: arm pll = 1200000000HZ general pll = 491519999HZ ddr pll = 664000000HZ codec pll = 1200000000HZ new pll = 594000000HZ SecureBootEn = 0, SecureBootLock = 0 #Boot ver: 0000-00-00#0.00 empty serial no. Writing env to storage... done normal boot. no fuel gauge found no fuel gauge found read logo on state from dts [0] no fuel gauge found 'recovery' does not seem to be a partition nor an address Unable to boot:recovery try to start backup 'backup' does not seem to be a partition nor an address Unable to boot:backup try to start rockusb -
i can't stop android boot. ( hit a key at 0 )
i boot on android
in the shell command
try :
reboot command (usage: reboot [-p] [rebootcommand] )
hit a key quickly without sucess , android boot ...
-
boot xenial-minimal-rock64-0.5.15-136-arm64.img
=> printenv
arch=arm
baudrate=1500000
board=rock64_rk3328
board_name=rock64_rk3328
boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootaa64.efi; if fdt addr ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi
boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}extlinux/extlinux.conf
boot_mode=unknown
boot_net_usb_start=usb start
boot_prefixes=/ /boot/
boot_script_dhcp=boot.scr.uimg
boot_scripts=boot.scr.uimg boot.scr
boot_targets=mmc0 mmc1 usb0 pxe dhcp
bootargs=earlycon=uart8250,mmio32,0xff130000 rw root=LABEL=linux-root rootwait rootfstype=ext4 init=/sbin/init coherent_pool=1M ethaddr=da:d1:f5:a1:86:84 eth1addr=da:d1:f5:a1:86:a4 serial=2f1213b77b38289
bootcmd=run distro_bootcmd
bootcmd_dhcp=run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00011:UNDI:003000;setenv bootp_arch 0xb;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci;
bootcmd_mmc0=setenv devnum 0; run mmc_boot
bootcmd_mmc1=setenv devnum 1; run mmc_boot
bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi
bootcmd_usb0=setenv devnum 0; run usb_boot
bootdelay=2
bootfile=/extlinux/extlinux.conf
bootfstype=fat
cpu=armv8
cpuid#=55524b5030393030350000000015051e
devnum=0
devplist=6
devtype=mmc
distro_bootcmd=for target in ${boot_targets}; do run bootcmd_${target}; done
efi_dtb_prefixes=/ /dtb/ /dtb/current/
eth1addr=da:d1:f5:a1:86:a4
ethact=ethernet@ff540000
ethaddr=da:d1:f5:a1:86:84
fdt_addr_r=0x01f00000
fdtcontroladdr=7df1db70
fdtfile=rockchip/rk3328-rock64.dtb
fileaddr=1f00000
filesize=0
kernel_addr_r=0x02000000
load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile}
mmc_boot=if mmc dev ${devnum}; then setenv devtype mmc; run scan_dev_for_boot_part; fi
partitions=uuid_disk=${uuid_gpt_disk};name=loader1,start=32K,size=4000K,uuid=${uuid_gpt_loader1};name=reserved1,size=64K,uuid=${uuid_gpt_reserved1};name=reserved2,size=4M,uuid=${uuid_gpt_reserved2};name=loader2,size=4MB,uuid=${uuid_gpt_loader2};name=atf,size=4M,uuid=${uuid_gpt_atf};name=boot,size=112M,bootable,uuid=${uuid_gpt_boot};name=rootfs,size=-,uuid=B921B045-1DF0-41C3-AF44-4C6F280D3FAE;
pxefile_addr_r=0x00600000
ramdisk_addr_r=0x04000000
scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi;
scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then run scan_dev_for_boot; fi; done
scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootaa64.efi; then echo Found EFI removable media binary efi/boot/bootaa64.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile
scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}extlinux/extlinux.conf; then echo Found ${prefix}extlinux/extlinux.conf; run boot_extlinux; echo SCRIPT FAILED: continuing...; fi
scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
scriptaddr=0x00500000
serial#=2f1213b77b38289
soc=rockchip
stderr=serial@ff130000
stdin=serial@ff130000
stdout=serial@ff130000
usb_boot=usb start; if usb dev ${devnum}; then setenv devtype usb; run scan_dev_for_boot_part; fi
vendor=rockchipEnvironment size: 4497/8188 bytes
=> bdinfo
arch_number = 0x00000000
boot_params = 0x00000000
DRAM bank = 0x00000000
-> start = 0x00200000
-> size = 0x7FE00000
baudrate = 1500000 bps
TLB addr = 0x7FFF0000
relocaddr = 0x7FF27000
reloc off = 0x7FD27000
irq_sp = 0x7DF1DB60
sp start = 0x7DF1DB60
Early malloc usage: 470 / 800
fdt_blob = 000000007df1db70 -
escuse me more the start of Armbian_5.59_Rk3328-tv_Ubuntu_bionic_default_4.4.152_desktop_20180831.img.xz
DDR version 1.10 20171106
In
DDR3
333MHz
Bus Width=32 Col=11 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=2048MB
ddrconfig:2
OUT
Boot1 Release Time: 2017-06-12, version: 2.44
ChipType = 0x11, 170
SdmmcInit=2 0
BootCapSize=2000
UserCapSize=7456MB
FwPartOffset=2000 , 2000
SdmmcInit=0 0
BootCapSize=0
UserCapSize=15193MB
FwPartOffset=2000 , 0
StorageInit ok = 231192
Raw SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit ret = 0, SecureMode = 0
LoadTrustBL
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xa3bbc
RunBL31 0x10000
NOTICE: BL31: v1.3(debug):f947c7e
NOTICE: BL31: Built : 12:09:31, Aug 30 2018
NOTICE: BL31:Rockchip release version: v1.3
INFO: ARM GICv2 driver initialized
INFO: Using rkfiq sec cpu_context!
INFO: boot cpu mask: 1
INFO: plat_rockchip_pmu_init: pd status 0xe
INFO: BL31: Initializing runtime services
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2017.09-armbian (Aug 31 2018 - 11:03:12 +0300)Model: Firefly ROC-RK3328-CC
DRAM:--- it stop here ---
-
boot sd :
xenial-minimal-rock64-0.5.15-136-arm64.img
! DDR version 1.10 20171106
In
DDR3
333MHz
Bus Width=32 Col=11 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=2048MB
ddrconfig:2
OUT
Boot1 Release Time: 2017-06-12, version: 2.44
ChipType = 0x11, 171
SdmmcInit=2 0
BootCapSize=2000
UserCapSize=7456MB
FwPartOffset=2000 , 2000
SdmmcInit=0 0
BootCapSize=0
UserCapSize=15193MB
FwPartOffset=2000 , 0
StorageInit ok = 212180
Raw SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit ret = 0, SecureMode = 0
LoadTrustBL
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0x92d74
RunBL31 0x10000
NOTICE: BL31: v1.3(debug):f947c7e
NOTICE: BL31: Built : 09:28:45, May 31 2017
NOTICE: BL31:Rockchip release version: v1.3
INFO: ARM GICv2 driver initialized
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 1
INFO: plat_rockchip_pmu_init: pd status 0xe
INFO: BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR: Error initializing runtime service opteed_fast
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2017.09-g5aef9f7 (Oct 12 2017 - 09:11:39 +0000), Build: jenkins-linux-build-rock-64-136Model: Pine64 Rock64
DRAM: 2 GiB
MMC: rksdmmc@ff500000: 1, rksdmmc@ff520000: 0
*** Warning - bad CRC, using default environmentIn: serial@ff130000
Out: serial@ff130000
Err: serial@ff130000
Model: Pine64 Rock64
Net: eth0: ethernet@ff540000
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
invalid extent block
invalid extent block
invalid extent block
invalid extent block
invalid extent block
invalid extent block
invalid extent block
invalid extent block
invalid extent block
invalid extent block
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:6...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
reading /extlinux/extlinux.conf
259 bytes read in 3 ms (84 KiB/s)
1: kernel-4.4
Retrieving file: /initrd.img
reading /initrd.img
3504483 bytes read in 157 ms (21.3 MiB/s)
Retrieving file: /Image
reading /Image
18606088 bytes read in 814 ms (21.8 MiB/s)
append: earlycon=uart8250,mmio32,0xff130000 rw root=LABEL=linux-root rootwait rootfstype=ext4 init=/sbin/init coherent_pool=1M ethaddr=da:d1:f5:a1:86:84 eth1addr=da:d1:f5:a1:86:a4 serial=2f1213b77b38289
Retrieving file: /dtb
reading /dtb
42707 bytes read in 5 ms (8.1 MiB/s)
## Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
Loading Ramdisk to 7dbc2000, end 7df19963 ... OK
Loading Device Tree to 000000007dbb4000, end 000000007dbc16d2 ... OKStarting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
-
i think your devide have ddr4 and my device ddr3
-
android boot :
DDR version 1.10 20171106
InDDR3
333MHz
Bus Width=32 Col=11 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=2048MB
ddrconfig:2
OUT
Boot1 Release Time: 2017-06-12, version: 2.44
ChipType = 0x11, 170
SdmmcInit=2 0
BootCapSize=2000
UserCapSize=7456MB
FwPartOffset=2000 , 2000
SdmmcInit=0 2
StorageInit ok = 79048
Raw SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit ret = 0, SecureMode = 0
LoadTrustBL
No find bl30.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0x59ba4
RunBL31 0x10000
NOTICE: BL31: v1.3(debug):0ac3e1a
NOTICE: BL31: Built : 09:14:58, Nov 15 2017
NOTICE: BL31:Rockchip release version: v1.3
INFO: ARM GICv2 driver initialized
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 1
INFO: plat_rockchip_pmu_init: pd status 0xe
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-126-g2a74125 #46 Thu Dec 14 08:21:08 UTC 2017 aarch64)INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.4
INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2017.02-RK3328-06-02632-g6d55d18 (Jan 24 2018 - 14:26:32)CPU: rk3328
cpu version = 1
CPU's clock information:
arm pll = 600000000HZ
general pll = 491519999HZ
ddr pll = 664000000HZ
codec pll = 1200000000HZ
new pll = 594000000HZ
Board: Rockchip platform Board
Uboot as second level loader
DRAM: Found dram banks: 1
Adding bank:0000000000200000(000000007fe00000)
Reserve memory for trust os.
dram reserve bank: base = 0x08400000, size = 0x01e00000
128 MiB
GIC CPU mask = 0x00000001
SdmmcInit = 0 20
SdmmcInit = 2 0
storage init OK!
Using default environmentGetParam
remotectl v0.1
pwm freq=0x23c346
pwm_freq_nstime=0x1aa
Load FDT from boot image.
no key node
can't find dts node for fixed
rk816_set_regulator_init vdd_arm init uV:1225000
pmic:rk805
can't find dts node for pwm0
CPU's clock information:
arm pll = 1200000000HZ
general pll = 491519999HZ
ddr pll = 664000000HZ
codec pll = 1200000000HZ
new pll = 594000000HZ
SecureBootEn = 0, SecureBootLock = 0#Boot ver: 2018-01-10#2.44
empty serial no.
normal boot.
checkKey
vbus = 1
board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
no fuel gauge found
no fuel gauge found
can't find power_ctr node for lcdc0
can't find dts node for deviceinfo
rk_hdmi_register:fail to read deviceinfo
hdmi baseparamer 0x0@0-0
left = 0, right = 0, top = 0, bottom = 0, overscan = 0
panel->left = 100 , panel->right = 100 ,panel->top = 100, panel->bottom = 100, p anel->overscan = 100
tve baseparamer 0x0@0-0
[EDID-EXTEND] It is a CEA 861 Series Extension.
no baseparametr,find best edid mode,vic=16
hdmi_dev->video.vic is 16
hdmi_dev_config_video vic 16 color_output 3 color_output_depth 8
pixel clk is 148500000 tmds clk is 148500000
hsync_pol 1 vsync_pol 1
[HDMI] sucess output HDMI.
hdmi_dev_config_audio
HDMI_AUDIO_FS_48000
rate = 4, tmdsclk = 148500000, N = 6144, CTS = 148500
read logo on state from dts [1]
no fuel gauge found
checkKey
vbus = 1
board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
Hit any key to stop autoboot: 0
vendor read error!
Set oem_unlocked=0Secure Boot state: 0
kernel @ 0x00280000 (0x00de4fa8)
ramdisk @ 0x04bf0000 (0x0019d150)
bootrk: do_bootm_linux...
Loading Device Tree to 0000000004600000, end 000000000461d5c5 ... OK
Add bank:0000000000200000, 0000000008200000
Add bank:000000000a200000, 0000000075e00000
WARNING: could not set reg FDT_ERR_BADOFFSET.Starting kernel ...
<hit enter to activate fiq debugger>
[ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpuset
[ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpu
[ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpuacct
[ 0.000000] [0: swapper: 0] Linux version 3.10.104 (qiaohy@server1 ) (gcc version 4.9 20150123 (prerelease) (GCC) ) #12 SMP PREEMPT Wed Jan 24 14:2 -
ok so the log is :
U-Boot 2017.09-armbian (Aug 31 2018 - 11:03:12 +0300)
Model: Firefly ROC-RK3328-CC
DRAM: -
perfect !!! 1500000
-
I try 115200 sor srial spped , i have some ascii but not readable ...
-
I open the box v88 mini box :
i see connection in J3500.
Search my usb, my soldering gun ...
-
on emm is stock android,if i don't have sd it boot .
I find a file dtb in the boot sd on xenial-minimal-rock64-0.5.15-136-arm64.img.xz, i rename it in dtb.img and put in the sd of "Armbian_5.59_Rk3328-tv_Ubuntu_bionic_default_4.4.152_desktop_20180831.img.xz" without success
I open the box and come back
-
i try all dtb rk3328 one by one
for the moment :
i boot on sd on :
xenial-minimal-rock64-0.5.15-136-arm64.img.xz
in read the changelog i see after : "0.6.0: Use SPL/TPL instead of Rockchip's loaders (supports flashing and booting from SPI),"
delete partition 6 and 7 , reboot with usb stick(bionic-minimal-rock64-0.7.9-1067-arm64.img.xz), activate eth1 ( all explain in the post off segv )
If you want I can try to open the box to find rs232 connection to see bootlog.
-
Don't boot in automatic, i try dtb
-
v88 mini too,
i will test.
Realtek in near futur ?
in General Chat
Posted
Perfect, my posts is for Box TV , i see ZIDOO X9S or ZIDOO X20, beelink SEA 1.
And the Video Hardware Codec are in the source code ?