[Orangepi 3 h6 allwiner chip]

Hi,

 

i started to dig into the source code of the kernel from Sunxi, i could find that the kernel that is compilied the one from the oneplus is used..

 

i ordered one orange pi 3 2gb Ram 8GB eemc, so still quit exciteted

 

best regards

[Orangepi 3 h6 allwiner chip]

1 hour ago, Igor said:

Correct. Probably nobody made it yet - check https://groups.google.com/forum/#!forum/linux-sunxi and LKML.

 

Create a u-boot config, u-boot DT following by kernel DT. With a patch ... there are a few real world example in the script under patch/ directory. Use most similar board basic functions (UART, MMC, USB) as a template ... beware that HDMI out on H6 is broken in NEXT 4.19.y ...  but works on DEV 4.20.y ... overall H6 support is WIP.

 

1 hour ago, Igor said:

Correct. Probably nobody made it yet - check https://groups.google.com/forum/#!forum/linux-sunxi and LKML.

 

Create a u-boot config, u-boot DT following by kernel DT. With a patch ... there are a few real world example in the script under patch/ directory. Use most similar board basic functions (UART, MMC, USB) as a template ... beware that HDMI out on H6 is broken in NEXT 4.19.y ...  but works on DEV 4.20.y ... overall H6 support is WIP.

thanks, i will have a look, if i am able to do this myself..

[Orangepi 3 h6 allwiner chip]

1 hour ago, Werner said:

Just to see Armbian is building fine this does not mean it will run properly or even boot 

but this is good to know not to have problems with ther builidng mashine itself...

[Orangepi 3 h6 allwiner chip]

hi so we need a new device tree for this board is that correct ?

 

i have setup a build maschine in a virtual box, ornagepi image is building fine and also armbian is building fine for H6 ornagepi one pus and lite2...

 

let me now if i could help in any way to get armbian porteted on this H6 orangepi 3

[Beelink GS1 Allwinner H6]

Hi Guys,

 

i am owner of this box and i wanted to ask you if anyone is intressted in getting armbian running on it. Dissasambly does not look to be a big problem.

 

and here are som pictures:

 

https://forum.freaktab.com/forum/tv-player-support/allwinner-tv-players/679476-beelink-gs1-6k-tv-box-allwinner-h6-android-7-1-bt4-1-1000m-lan-usb-3-0-media-player-2gb-ram-16gb-rom

 

from the pictures i cannot tell were the uart pins are, anyone can ?

 

from user froezus post

Hi,

I have tried to boot the OrangePi One Plus image on my Beelink GS1, but either the UART is bad configured or I have damaged the TXD pin :'(.

I can't stop the U-boot nor enter a login.

 

bootlog : https://pastebin.com/Rd2EEduZ

 

I try to get some information from the 

sys_config.fex (from gs1_rv106N0.img): https://pastebin.com/TdnfRMJL

reverse dts: https://pastebin.com/jK2zhGAe

 

Everything seems correct so maybe I have damaged the TXD pin.

Do you think there is lot of work to make ethernet/ssh works one my board ?

 

Thanks,

Clement

 

he found a way to get uart output but no anwser yet were this uart pins are, it looks like we already have some device treefiels her and a bootlog.

 

anyone can help, i am here for test

 

many thanks

 

Krachlatte

 

[H6 boards: Orange Pi One Plus, Orange Pi 3 Plus and Pine H64]

Hi @froezus,

 

how did you boot this on the Beelink GS1 just burned the image with Win32Diskimage and it automatically booted from SD card, after modifiyng the fex file in the Orangepi image from the GS1 image sys_config_fex?

 

no other changes ?

 

were are the UART pins on the board, i got such a device here, i could open it up and start some testing.....

 

best regards