First login attempt

[heads5150]

When I try to login for the first time on an Odroid C2 and I follow these steps:

 

1. Root password is 1234. You will be prompted to change this password and to create a normal user at first login.
2. Then I get the following error: Authentication token manipulation error

 

The password is reset and I go through through steps 1 and 2. I've tried using 5 different passwords with the same result.

 

Any ideas?

[Davey Darko]

If I remember correctly, when the password change script starts it asks for the current password first and then you have to type your new password in twice.

[heads5150]

Ah yes... helps if you read the prompt correctly.

 

Thank you so much for the hint

[Davey Darko]

Glad you got it working, I had the same problem first time script ran for me, took me a while to read the prompt as well.

[rampage]

the same with me. Unfortunately screen was cut. (Resolution setup is the next step) , and I didn't saw the first characters of the phrase..

[sebba]

Hi there,

I'm sorry my first post here is this but... need help... thank you

 

I have an OrangePI PC+ with Armbian_5.20_Orangepipcplus_Debian_jessie_3.4.112_desktop installed in emmc

Everything is OK, until now

 

I need to have a second Armbian on the SDCARD only for testing some other applications

I made a SD card exactly like before (when I've intalled the Armbian and put it into the emmc), same card reader, same SD cards, same .img file....

I tried even with the version without Desktop

 

When I want to start from SD card, I login with root/1234 and then I type the new password (once) and hit enter (I tried with both enter keys, just to be sure the key is ok) and 2-3 seconds right after that I have this error: Authentication token manipulation error

I try to restart, to rewrite the SD card, same problem

 

Could be a problem because I have same distro on the emmc?

 

Best regards,

Seb

[zador.blood.stained]

When I want to start from SD card, I login with root/1234 and then I type the new password (once) and hit enter (I tried with both enter keys, just to be sure the key is ok) and 2-3 seconds right after that I have this error: Authentication token manipulation error

Please check again what you are prompted for after logging in with root/1234

You are supposed to enter the old password (1234) again during password change procedure

[sebba]

sure, I used the old password (not the password which is for the emmc installation)

 

I also put that password instead 1234 and no login (which is correct) and no go further (to enter a new password)

I also tried to enter the new password like the password used on emmc, same error

Same with totally different new password

[sebba]

I'm a big idiot... Yeah.... problem solved! Thanks and sorry for bothering...