Here's what I get when trying to boot (data is from my serial adapter):
I2C_WriteByte nack returned
I2C Device Address Write Abitration Error
I2C_WriteByte nack returned
I2C Device Address Write Abitration Error
I2C_WriteByte nack returned
I2C Device Address Write Abitration Error
I2C_WriteByte nack returned
I2C Device Address Write Abitration Error
Wakeup Sub CPU 1234567
CPU Wakeup done! WFI is expected.
CPU0 is Master!
U-Boot 2016.01-armbian (Sep 02 2019 - 08:57:37 +0200)
DRAM: 1 GiB
MMC: NEXELL DWMMC: 0, NEXELL DWMMC: 1
loaded from SD, getting env from MMC 1
*** Warning - bad CRC, using default environment
MIPI: display.0
HDMI: display.0, preset 0 (1280 * 720)
HDMI: phy ready...
LCD: [HDMI] dp.0.1 1220x680 16bpp FB:0x46000000
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
** File not found /boot.scr **
## Executing script at 40000000
Wrong image format for "source" command
1277 bytes read in 31 ms (40 KiB/s)
## Executing script at 40000000
Wrong image format for "source" command
Card did not respond to voltage select!
** Bad device mmc 0 **
## Executing script at 40000000
Wrong image format for "source" command
** Bad device mmc 0 **
## Executing script at 40000000
Wrong image format for "source" command
nanoPi#
Here's what gpg and sha256sum output:
% gpg --verify Armbian_20.02.0-rc0_Nanopifire3_buster_legacy_4.14.166.img.asc
gpg: assuming signed data in 'Armbian_20.02.0-rc0_Nanopifire3_buster_legacy_4.14.166.img'
gpg: Signature made Mon Jan 20 00:04:11 2020 EST
gpg: using RSA key DF00FAF1C577104B50BF1D0093D6889F9F0E78D5
gpg: Good signature from "Igor Pecovnik <igor@armbian.com>" [unknown]
gpg: aka "Igor Pecovnik (Ljubljana, Slovenia) <igor.pecovnik@gmail.com>" [unknown]
gpg: WARNING: This key is not certified with a trusted signature!
gpg: There is no indication that the signature belongs to the owner.
Primary key fingerprint: DF00 FAF1 C577 104B 50BF 1D00 93D6 889F 9F0E 78D5
% sha256sum -c Armbian_20.02.0-rc0_Nanopifire3_buster_legacy_4.14.166.img.sha
Armbian_20.02.0-rc0_Nanopifire3_buster_legacy_4.14.166.img: OK
Output of mount:
# mount --ro Armbian_20.02.0-rc0_Nanopifire3_buster_legacy_4.14.166.img /mnt/usb
mount: wrong fs type, bad option, bad superblock on /dev/loop0,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so.
dmesg doesn't mention anything about the mounting problems.
Gdisk outputs:
# gdisk -l Armbian_20.02.0-rc0_Nanopifire3_buster_legacy_4.14.166.img
GPT fdisk (gdisk) version 1.0.1
Partition table scan:
MBR: MBR only
BSD: not present
APM: not present
GPT: not present
***************************************************************
Found invalid GPT and valid MBR; converting MBR to GPT format
in memory.
***************************************************************
Warning! Secondary partition table overlaps the last partition by
33 blocks!
You will need to delete this partition or resize it in another utility.
Disk Armbian_20.02.0-rc0_Nanopifire3_buster_legacy_4.14.166.img: 2957312 sectors, 1.4 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 9FF78C6C-5C9B-4B4D-A4F3-B0B52827C119
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 2957278
Partitions will be aligned on 2048-sector boundaries
Total free space is 8158 sectors (4.0 MiB)
Number Start (sector) End (sector) Size Code Name
1 8192 2957311 1.4 GiB 8300 Linux filesystem
The board I'm using is the Nano PI Fire3 LTS. It has worked before, although with a different Micro SD card. I accidentally erased it's SD card and I'm trying to reinstall.
My current Micro SD card is a SanDisk Ultra 32GB rated USH-I, (10), U with a 1 inside, and A1.
I used dd if=IMG of=DEV BS=8192 status=progress to place the image onto the Micro SD card.
I also tried with my original SP Micro SD card without success.
Question
ballsystemlord
Here's what I get when trying to boot (data is from my serial adapter):
Here's what gpg and sha256sum output:
Output of mount:
dmesg doesn't mention anything about the mounting problems.
Gdisk outputs:
The board I'm using is the Nano PI Fire3 LTS. It has worked before, although with a different Micro SD card. I accidentally erased it's SD card and I'm trying to reinstall.
My current Micro SD card is a SanDisk Ultra 32GB rated USH-I, (10), U with a 1 inside, and A1.
I used dd if=IMG of=DEV BS=8192 status=progress to place the image onto the Micro SD card.
I also tried with my original SP Micro SD card without success.
If you need anything else, just yell.
Thanks!
Link to comment
Share on other sites
3 answers to this question
Recommended Posts