potatopi Posted February 1, 2020 Share Posted February 1, 2020 I have an orange pi lite, I want to use the lcd ili9341 3.2 model SKU: MSP3218 touch screen, and how the installation connections I don't know are these jumpers wires in the gpios correct and if possible use the sd card reader in the orange pi uart? I need your help. I be very grateful. The OS is "Armbian_20.02.0-rc1_Orangepilite_buster_current_5.4.14_desktop" Link to comment Share on other sites More sharing options...
martinayotte Posted February 2, 2020 Share Posted February 2, 2020 17 hours ago, potatopi said: if possible use the sd card reader in the orange pi uart? No , not on the UART ! It should be connected to SPI0_MOSI, SPI0_MISO, SPI0_CLK and SPI0_CS0 (pins 19, 21, 23 and 24 respectively). But since SPI0_CS0 is already in use for LCD, you need to use another GPIO, such PA21 (pin26) as a secondary SPI0_CS1, all other pins can be shared. Link to comment Share on other sites More sharing options...
potatopi Posted February 5, 2020 Author Share Posted February 5, 2020 http://mobile4dev.blogspot.com/2017/09/orange-pi-pc-tft-ili9341.html Hi! Is it work with newer Armbian versions? I can't find xorg.conf in /etc/X11/ folder. Link to comment Share on other sites More sharing options...
potatopi Posted April 13, 2020 Author Share Posted April 13, 2020 have to use the python language Link to comment Share on other sites More sharing options...
.thumb.jpeg.39c38ddf97ecc5c07a1a3f15f06b73bd.jpeg)
Recommended Posts