Guest Guest Posted June 1, 2016 Posted June 1, 2016 Hi all, got a hummingboard i4-pro installed with armbian debian vanilla. After apt-get update && apt-get upgrade system won't come up again. Anybody else? How to activate hdmi output for debugging? Am I the only one? Even more: Got a BlueBeach mini PCI-e SATA 2-ports controller, recognized as: 01:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02) (prog-if 01 [AHCI 1.0])Subsystem: ASMedia Technology Inc. Device 1060 but my attached harddrive (2,5", separate psu) will not be assigned as /dev/sdX Any idea where to start to troubleshoot? Thanks a lot guys
Igor Posted June 2, 2016 Posted June 2, 2016 Vanilla kernels does not have HDMI output, only serial console. It's written in bold @download section under bugs and limitations. Why mPCI does not work is hard to say but one is for sure - only PCI based devices are supported so if this uses mSATA it won't work.
Guest joe Posted June 2, 2016 Posted June 2, 2016 me too. I have Orange Pi One. Yesterday try "apt-get update && apt-get upgrade" from desktop version Armbian 5.10. After I type reboot in console Orange turn off and when I plug adapter it doesnt boot, on board light up only diods in RJ45 connector
Guest joe Posted June 2, 2016 Posted June 2, 2016 today I try new image 5.13, it work, but when it booting there was errors: buffer I/O error and emmc(somethink text) error
Igor Posted June 2, 2016 Posted June 2, 2016 buffer I/O error and emmc(somethink text) error That indicates some troubles with media, possible hardware failure. Please check your SD card for errors - you can do with armbianmonitor
Guest Guest Posted June 4, 2016 Posted June 4, 2016 Ok I understand that the half-size mini-PCI-E port is only for pci-based cards. At the back/bottom the mSATA port is working with my mSATA 32GB SSD. Now I got another 2-port MiniPCIE card fitting into the bottom mSATA port, which is described as a MiniPCIE card. It's not working too, obviously because the other way round the mSATA port does not understand miniPCIE cards. https://www.amazon.de/gp/product/B00ORXQY2E/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 Ain't there any mSATA or miniPCIE card with 2-SATA ports that work on hummingboard? I just wanted to connect 2 SATA hard disks and do mdraid. And still, Armbian_5.10_Cubox-i_Debian_jessie_4.5.2 will not boot after apt-get-update && apt-get upgrade I can't be the only one ?? It's 100% reproducable.
Igor Posted June 4, 2016 Posted June 4, 2016 I can't be the only one ?? It's 100% reproducable. I found out what is happening but don't know where exactly is a problem yet. MMC0 become MMC1 and if you correct boot parameters and fstab it will boot. Ain't there any mSATA or miniPCIE card with 2-SATA ports that work on hummingboard? In theory this or similar in the top mini PCI slot: http://www.dx.com/p/iocrest-io-mpce1061-2i-mini-pci-express-sata-3-0-controller-card-green-383391#.V1Mjh_l97AQ
Guest Silvio Posted June 16, 2016 Posted June 16, 2016 I FINALLY FOUND For all who are looking for a Dual-SATA Mini PCI-E adapter for attaching two harddisks to the Hummingboard i4-pro, THIS adapter is the ONLY one (out of ~8 tested adapters) WHICH WORKS: https://www.amazon.de/gp/product/B01ASNHHNQ I'm german, so I got no english/international amazon link. Unfortunately the product has no "real name" - even the driver cd nor the manual tells a brand name. But if the amazon link will die someday, here's the lspci -v output: 01:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: ASMedia Technology Inc. Device 1060 Flags: bus master, fast devsel, latency 0, IRQ 155 I/O ports at 1020 [size=8] I/O ports at 1030 [size=4] I/O ports at 1028 [size=8] I/O ports at 1034 [size=4] I/O ports at 1000 [size=32] Memory at 01100000 (32-bit, non-prefetchable) [size=512] [virtual] Expansion ROM at 01200000 [disabled] [size=64K] Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [78] Power Management version 3 Capabilities: [80] Express Legacy Endpoint, MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: ahci currently running armbian jessie legacy. I will try it on vanilla too. Damn am I happy , just wanted to share
Igor Posted June 18, 2016 Posted June 18, 2016 Thanks for sharing! Information which don't work work would be also helpful I almost got this one: http://www.dx.com/p/mini-pci-express-sata-3-0-expansion-controller-card-black-green-337644
Recommended Posts