ClubSun Posted March 18, 2020 Share Posted March 18, 2020 Hello, I'm using the x96 max and i have this problem Anyone know a solution to this please? Thank you for your time in advance! Link to comment Share on other sites More sharing options...
almotra Posted April 1, 2020 Share Posted April 1, 2020 You have to rename u-boot.sd to u-boot.ext Link to comment Share on other sites More sharing options...
root-stas Posted April 29, 2020 Share Posted April 29, 2020 EDID give you incorrect screen mode, try use next command: xrandr --output HDMI-1 --mode 1920x1080 where HDMI-1 is display name, see on xrandr output. That is happened because armbian try output image with wrong screen frequency. Link to comment Share on other sites More sharing options...
root-stas Posted April 29, 2020 Share Posted April 29, 2020 Or simply add new own mode, for me that HDMI-1 display and FHD 60Hz mode: cvt 1920 1080 60 If output: # 1920x1080 59.95 Hz (CVT 1.44M9) hsync: 55.99 kHz; pclk: 118.25 MHz Modeline "1920x1080_60.00" ... Copy all text after Modeline to next command: xrandr --newmode "1920x1080_60.00" a lot of numbers -hsync +vsync Set new mode to display: xrandr --addmode HDMI-1 1920x1080_60.00 Select to use: xrandr --output HDMI-1 --mode 1920x1080_60.00 Good luck. But that don't fixed jumping on console, kernel use wrong mode. Link to comment Share on other sites More sharing options...
Dono Posted September 27, 2020 Share Posted September 27, 2020 Hi I have an X96 Max box . When I go into my StbEmu app it’s showing me this. How do I fix it? Link to comment Share on other sites More sharing options...
Recommended Posts