markonjak Posted October 4, 2020 Share Posted October 4, 2020 I am having problems with ethernet, the sbc was connected to 100 mbps network and it worked normally, but recently i relocated it and connected it to another cable, the problem is that now i only get 10mbps, the cable is ok because it tried in my pc and got 100mbps, but i only get 10mbps on the sbc, then i found how to fix this in settings, but i acidentally removed ethernet connection that i was using and now the ethernet doesn't work, do i have to change something in network interfaces? also it says no link detected Link to comment Share on other sites More sharing options...
markonjak Posted October 4, 2020 Author Share Posted October 4, 2020 I tried sudo /etc/init.d/networking start and got an error which is in the picture, i'm pretty sure that's why the ethernet doesn't work but i don't know what the error says it's wrong or what should i do Link to comment Share on other sites More sharing options...
Recommended Posts