gabor_ka Posted July 5, 2016 Share Posted July 5, 2016 Hey everyone. I have an MK802 II stick, which has the A10 s.o.c, so i use the Olinuxino Lime a10 image on it. Everything works pretty much fine, except one little thing. This machine has worked fine with non-standard resolutions, like 1440x900, or 1280x1024. Now, when i turn it on, the U-boot screen appears correctly, it even shows that it set the resolution to 1440x900, and after that, the monitor says "signal out of range". Of course, it works well with a 1080p monitor, but i wanted to use this one too. Thanks! Link to comment Share on other sites More sharing options...
amsel Posted July 11, 2016 Share Posted July 11, 2016 Same with me!I have a Banana Pi Router M1, with a Allwinner A20, booting with 1280 x 1024 at the beginning. Afterwards there is the out-of-range-thing. No problems with vnc and LXDE (Lightweight X11 Desktop Enviroment) though! http://forum.armbian.com/index.php/topic/1586-bpi-r1-display-out-of-range-error/ It doesn't seem to interst anyone. Do you have any idea yet? Link to comment Share on other sites More sharing options...
Recommended Posts