[Lime/next/jessie/console] Armbian compilation stops

Pascal · July 10, 2016

Hello

All in blue ...it's ok

but in red ....not ok

i started by

git clone --depth 1 https://github.com/igorpecovnik/lib

Clonage dans 'lib'...

remote: Counting objects: 1075, done.

remote: Compressing objects: 100% (935/935), done.

remote: Total 1075 (delta 155), reused 806 (delta 70), pack-reused 0

RÃ©ception d'objets: 100% (1075/1075), 50.19 MiB | 1.06 MiB/s, fait.

RÃ©solution des deltas: 100% (155/155), fait.

VÃ©rification de la connectivitÃ©... fait.

OK ! After i copy compile.sh in my directory

and GO! ./compile.sh

I choose "full os image to generate a sdcard ... board LIME ....Next lastest stable @kernel.org....jessie debian8 .......image with console interface"

I rÃ©sume

Compiling U-BOOT OK ( no error nowhere )

Compiling Kernel OK ( no error nowhere )

Creating kernel package OK

[ o.k. ] Creating board support package [ lime next ]

[ o.k. ] Fingerprinting [ Armbian 5.17 Lime Debian jessie next ]

[ o.k. ] Building package [ linux-jessie-root-next-lime ]

[ o.k. ] Starting build process for [ lime jessie ]

[ o.k. ] Creating new rootfs for [ jessie ]

[ o.k. ] Installing base system [ Stage 1/2 ]

But here

Debootstrap (stage 1/2)...

I: Retrieving InRelease

I: Failed to retrieve InRelease

I: Retrieving Release

E: Failed getting release file http://localhost:3142/httpredir.debian.org/debian/dists/jessie/Release

After

cp: impossible de crÃ©er le fichier standard '/home/pascal/helixee/newversion/output/cache/sdcard/usr/bin/': Aucun fichier ou dossier de ce type

[ o.k. ] Installing base system [ Stage 2/2 ]

translation : cp: can't create the file 'home/pascal/helixee/newversion/output/cache/sdcard/usr/bin/' No file or no directory

Debootstrap (stage 2/2)...

chroot: failed to run command â€˜/bin/bashâ€™: No such file or directory

and finally ...........

[ error ] ERROR in function create_rootfs_cache [ debootstrap-ng.sh:166 ]

[ error ] Debootstrap base system second stage failed

[ o.k. ] Process terminated

[ error ] ERROR in function unmount_on_exit [ debootstrap-ng.sh:553 ]

[ error ] debootstrap-ng was interrupted

[ o.k. ] Process terminated

What's wrong ? I suppose that's in 1st stage of debootstrap ( debootstrap.sh) but what and where ? For information few day ago i done this with u-boot 2016-05 an kernel V4.6.2 ( for the same board ) and all was good

Thank you for your help

Pascal · July 11, 2016

Hello everybody ....

The never ending story

And today new U-BOOT ... V2016-07

New problem

When compiling U-boot , It stop here

All in blue ...it's ok

but in red ....not ok

Compiling u-boot... â”‚

â”‚ CC arch/arm/cpu/armv7/cache_v7.o â”‚

â”‚ CC arch/arm/lib/bootm-fdt.o â”‚

â”‚ AS arch/arm/cpu/armv7/cache_v7_asm.o â”‚

â”‚ CC arch/arm/lib/bootm.o â”‚

â”‚ CC arch/arm/cpu/armv7/cpu.o â”‚

â”‚ CC arch/arm/cpu/armv7/cp15.o â”‚

â”‚ CC arch/arm/mach-sunxi/clock.o â”‚

â”‚ CC arch/arm/lib/sections.o â”‚

â”‚ CC arch/arm/cpu/armv7/syslib.o â”‚

â”‚ CC arch/arm/mach-sunxi/cpu_info.o â”‚

â”‚ CC arch/arm/lib/stack.o â”‚

â”‚ CC arch/arm/mach-sunxi/dram_helpers.o â”‚

â”‚ AS arch/arm/cpu/armv7/lowlevel_init.o â”‚

â”‚ AS arch/arm/cpu/armv7/nonsec_virt.o â”‚

â”‚ CC arch/arm/cpu/armv7/virt-v7.o â”‚

â”‚ CC arch/arm/lib/interrupts.o â”‚

â”‚ CC arch/arm/cpu/armv7/virt-dt.o â”‚

â”‚ CC arch/arm/mach-sunxi/pinmux.o â”‚

â”‚ AS arch/arm/cpu/armv7/psci.o â”‚

â”‚ CC arch/arm/mach-sunxi/usb_phy.o â”‚

â”‚ CC arch/arm/cpu/armv7/sunxi/timer.o â”‚

â”‚ CC arch/arm/lib/reset.o â”‚

â”‚ CC arch/arm/cpu/armv7/sunxi/psci.o â”‚

â”‚ CC arch/arm/lib/cache.o â”‚

â”‚ CC arch/arm/mach-sunxi/clock_sun4i.o â”‚

â”‚ CC arch/arm/mach-sunxi/pmic_bus.o â”‚

â”‚ CC arch/arm/lib/cache-cp15.o â”‚

â”‚ AS arch/arm/lib/ashldi3.o â”‚

â”‚ AS arch/arm/lib/ashrdi3.o â”‚

â”‚ LD arch/arm/mach-sunxi/built-in.o â”‚

â”‚ CC arch/arm/lib/div0.o â”‚

â”‚ CC board/sunxi/board.o â”‚

â”‚ AS arch/arm/lib/div64.o â”‚

â”‚ AS arch/arm/lib/lib1funcs.o â”‚

â”‚ AS arch/arm/lib/lshrdi3.o â”‚

â”‚ AS arch/arm/lib/muldi3.o â”‚

â”‚ scripts/Makefile.build:425 : la recette pour la cible Â« arch/arm/cpu/armv7/sunxi Â» a Ã©chouÃ©e ( the recipe for the target Â« arch/arm/cpu/armv7/sunxi Â» fail ) â”‚

â”‚ Makefile:1210 : la recette pour la cible Â« arch/arm/cpu/armv7 Â» a Ã©chouÃ©e ( the recipe for the target Â« arch/arm/cpu/armv7 Â» fail ) â”‚

â”‚ CC arch/arm/lib/eabi_compat.o â”‚

â”‚ CC board/sunxi/ahci.o â”‚

â”‚ CC board/sunxi/dram_sun5i_auto.o â”‚

â”‚ LD arch/arm/lib/built-in.o â”‚

â”‚ AR arch/arm/lib/lib.a â”‚

â”‚ LD board/sunxi/built-in.o â”‚

*** [arch/arm/cpu/armv7] Erreur 2psci.o] Erreur

make: *** Attente des tÃ¢ches non terminÃ©es....v7/sunxi] Erreur 2rge {reglist}^ -- `pop {r0,r1,r2,r3,r4,r9,ip,pc}^'

[ error ] ERROR in function compile_uboot [ common.sh:94 ]

[ error ] U-boot file not found [ u-boot-sunxi-with-spl.bin ]

[ o.k. ] Process terminated

If someone can help me i will be sympatic

Thank you

I have one question .... Is it possible to force armbian script working with one kernel version and one u-boot version , downloading all needed on Hard disk and working only with this parameters without trying download anythings else ( Where i'll go for holydays there is no wifi, no network access )

Thank you

zador.blood.stained · July 11, 2016

And today new U-BOOT ... V2016-07

New problem

When compiling U-boot , It stop here

New u-boot issue will be fixed (or u-boot version will be reverted to v2016.05). Meanwhile you can try setting

BOOTBRANCH="v2016.05"

in userpatches/lib.config

I have one question .... Is it possible to force armbian script working with one kernel version and one u-boot version , downloading all needed on Hard disk and working only with this parameters without trying download anythings else ( Where i'll go for holydays there is no wifi, no network access )

It can be done manually by disabling update procedures and building of additional applications and drivers.

Pascal · July 12, 2016

Thanks a lot ZADOR !

I modify to have only uboot v2016-05

And now for u-boot it's ok .... But I already have my 1st problem ......I work on ununtu 16LTS 8GO ram Two core intel

Uboot and kernel compile ok but when armbian want to download debootstrap file i have an error ... I dont know if it's my computer or anything else ....an update of my computer ? server down ?

zador.blood.stained · July 12, 2016

Can you provide output of

systemctl status -l apt-cacher-ng

And please building after adding

NO_APT_CACHER=yes

to compile.sh

And now for u-boot it's ok .... But I already have my 1st problem ......I work on ununtu 16LTS 8GO ram Two core intel

Desktop or Server? Native or in the VM (Virtualbox, VMWare, ...)?

Pascal · July 13, 2016

Hello

My computer is a desktop , ubuntu version too native ( no virtualbox ..... ) .... If i remember , Ubuntu ask me to do some security updates 2/3 week ago ... But i don't know which pakage ...

Terminal output for "systemctl status -l apt-cacher-ng"

pascal@NTDEV:~$ systemctl status -l apt-cacher-ng

â— apt-cacher-ng.service - Apt-Cacher NG software download proxy

Loaded: loaded (/lib/systemd/system/apt-cacher-ng.service; enabled; vendor pr

Active: inactive (dead) (Result: exit-code) since mer. 2016-07-13 19:08:40 CE

Process: 1459 ExecStart=/usr/sbin/apt-cacher-ng SocketPath=/run/apt-cacher-ng/

Main PID: 1459 (code=exited, status=1/FAILURE)

juil. 13 19:08:40 NTDEV systemd[1]: apt-cacher-ng.service: Main process exited,

juil. 13 19:08:40 NTDEV systemd[1]: Failed to start Apt-Cacher NG software downl

juil. 13 19:08:40 NTDEV systemd[1]: apt-cacher-ng.service: Unit entered failed s

juil. 13 19:08:40 NTDEV systemd[1]: apt-cacher-ng.service: Failed with result 'e

juil. 13 19:08:40 NTDEV systemd[1]: apt-cacher-ng.service: Service hold-off time

juil. 13 19:08:40 NTDEV systemd[1]: Stopped Apt-Cacher NG software download prox

juil. 13 19:08:40 NTDEV systemd[1]: apt-cacher-ng.service: Start request repeate

juil. 13 19:08:40 NTDEV systemd[1]: Failed to start Apt-Cacher NG software downl

lines 1-14/14 (END)

Thanks again for your help !!! you're cool !!!

Pascal · July 13, 2016

I try NO_APT_CACHER=yes and i do a "./compile.sh" to test

It's better ! It's still good but just before the "end" of process i have ....

Get:217 http://httpredir.debian.org/debian/jessie/main lirc armhf 0.9.0~pre1-1.2 [348 kB] â”‚

â”‚ Get:218 http://httpredir.debian.org/debian/jessie/main sysbench armhf 0.4.12-1.1 [57.1 kB] â”‚

â”‚ Get:219 http://httpredir.debian.org/debian/jessie/main sysfsutils armhf 2.1.0+repack-4 [23.5 kB] â”‚

â”‚ Get:220 http://httpredir.debian.org/debian/jessie/main wireless-tools armhf 30~pre9-8 [130 kB] â”‚

â”‚ Get:221 http://httpredir.debian.org/debian/jessie/main hddtemp armhf 0.3-beta15-52 [60.1 kB] â”‚

â”‚ Get:222 http://httpredir.debian.org/debian/jessie/main stress armhf 1.0.1-1+deb8u1 [18.5 kB] â”‚

â”‚ Fetched 106 MB in 1min 3s (1667 kB/s) â”‚

led to fetch http://httpredir.debian.org/debian/pool/main/u/u-boot/u-boot-tools_2014.10+dfsg1-5_armhf.deb Error reading from server. Remote end closed connection [iP: 128.31.0.66 80]â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”˜

E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?

Free space:

tmpfs 1,5G 453M 1,1G 31% /home/pascal/helixee2/version1/output/cache/sdcard

[ o.k. ] Ending debootstrap process and preparing cache [ jessie ]

jessie-ng-armhf.d11...b44.tgz: 250MiO [38,5MiB/s] [============================================================================================================================================] 108%

[ o.k. ] Applying distribution specific tweaks for [ jessie ]

sed: impossible de lire /home/pascal/helixee2/version1/output/cache/sdcard/etc/ssh/sshd_config: Aucun fichier ou dossier de ce type

[ o.k. ] Applying common tweaks

sed: impossible de lire /home/pascal/helixee2/version1/output/cache/sdcard/etc/default/console-setup: Aucun fichier ou dossier de ce type

[ o.k. ] Installing kernel [ linux-image-next-sunxi ]

[ o.k. ] Installing u-boot [ linux-u-boot-next-lime ]

[ o.k. ] Installing headers [ linux-headers-next-sunxi ]

[ o.k. ] Installing DTB [ linux-dtb-next-sunxi ]

[ o.k. ] Installing board support package [ lime ]

sed: impossible de lire /home/pascal/helixee2/version1/output/cache/sdcard/etc/lirc/hardware.conf: Aucun fichier ou dossier de ce type

cp: impossible de crÃ©er le fichier standard '/home/pascal/helixee2/version1/output/cache/sdcard/etc/lirc/lircd.conf': Aucun fichier ou dossier de ce type

[ o.k. ] Installing extra applications and drivers

[ o.k. ] Merging and packaging linux firmware [ @host ]

[ o.k. ] Installing linux firmware [ 5.17 ]

[ o.k. ] Building deb [ hostapd ]

[ o.k. ] Downloading sources [ hostapd ]

[ o.k. ] Compiling hostapd [ v2.5 ]

[ error ] ERROR in function compiling [ hostapd.sh:72 ]

[ error ] Error building [ hostapd ]

[ o.k. ] Process terminated

[ error ] ERROR in function unmount_on_exit [ debootstrap-ng.sh:555 ]

[ error ] debootstrap-ng was interrupted

[ o.k. ] Process terminated

translation "impossible de lire " = "can't read "

"Aucun fichier ou dossier de ce type" = " No files or directory with this name "

To help you the content of Output.log

Displaying message: Preparing host info

Displaying message: Build host OS release xenial info

## BUILD CONFIGURATION

Config: linux-sunxi-next

Kernel source: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git

Branch: v4.6.4

linuxsource: linux-vanilla

Offset: 1

bootsize: 0

bootloader: git://git.denx.de/u-boot.git

bootsource: u-boot

bootbranch: v2016.05

CPU 480000 / 960000 with ondemand

13.07.2016 19:19:43 Armbian 5.17 Lime Debian jessie next

Displaying message: Starting Armbian build script @host info

Displaying message: Building Armbian 5.17 Lime Debian jessie next info

Displaying message: Syncing clock host info

Displaying message: source downloading @host info

Displaying message: ... you have latest sources u-boot v2016.05 info

Displaying message: ... you have latest sources linux-vanilla v4.6.4 info

Displaying message: ... you have latest sources sunxi-tools info

Displaying message: ... you have latest sources sunxi-display-changer info

Displaying message: Compiling sunxi tools @host & target info

Displaying message: Cleaning u-boot/v2016.05 info

Displaying message: Cleaning linux-vanilla/v4.6.4 info

Displaying message: Cleaning /home/pascal/helixee2/version1/output/debs for lime next info

Displaying message: Started patching process for u-boot u-boot-next 2016.05 info

Displaying message: Looking for user patches in userpatches/u-boot/u-boot-next info

Displaying message: ... add-awsom-uboot.patch succeeded info

Displaying message: ... add-cubieboard4.patch succeeded info

Displaying message: ... u-boot-02-support-cheap-mmc.patch succeeded info

Displaying message: Compiling uboot 2016.05 info

Displaying message: Compiler version arm-linux-gnueabihf-gcc 5.3.1 info

Displaying message: Target directory /home/pascal/helixee2/version1/output/debs/ info

Displaying message: Building deb linux-u-boot-next-lime_5.17_armhf.deb info

Displaying message: Started patching process for kernel sunxi-next 4.6.4 info

Displaying message: Looking for user patches in userpatches/kernel/sunxi-next info

Displaying message: ... 01-wens-banana-m1plus.patch succeeded info

Displaying message: ... axp20x-sysfs-interface.patch succeeded info

Displaying message: ... b53_switch.kernel_4.5+.patch succeeded info

Displaying message: ... bananapipro-wifi-codec-led-fix.patch succeeded info

Displaying message: ... bash_to_afterinstall.patch succeeded info

Displaying message: ... cubieboard_enable_mmc0_trigger_to_green_LED.patch succeeded info

Displaying message: ... cubietruck-enable-uart2.patch succeeded info

Displaying message: ... cubietruck_enable_mmc0_trigger_to_green_LED.patch succeeded info

Displaying message: ... linux-vanilla_v4.5.1_sun7i-a20-bananapro_dts.patch succeeded info

Displaying message: ... packaging-4.x-NEXT-with-postinstall-scripts.patch succeeded info

Displaying message: ... spi_allow_transfer_larger.patch succeeded info

Displaying message: ... support_for_second_mmc_cubieboard2.patch succeeded info

Displaying message: Compiling next kernel 4.6.4 info

Displaying message: Compiler version arm-linux-gnueabihf-gcc 5.3.1 info

Displaying message: Using kernel config file lib/config/kernel/linux-sunxi-next.config info

Displaying message: Creating board support package lime next info

Displaying message: Fingerprinting Armbian 5.17 Lime Debian jessie next info

Displaying message: Building package linux-jessie-root-next-lime info

Displaying message: Starting build process for lime jessie info

Displaying message: Creating new rootfs for jessie info

Displaying message: Installing base system Stage 1/2 info

Displaying message: Installing base system Stage 2/2 info

Displaying message: ERROR in function create_rootfs_cache debootstrap-ng.sh:168 err

Displaying message: Debootstrap base system second stage failed err

Displaying message: Process terminated info

Displaying message: ERROR in function unmount_on_exit debootstrap-ng.sh:555 err

Displaying message: debootstrap-ng was interrupted err

Displaying message: Process terminated info

Thanks

zador.blood.stained · July 13, 2016

led to fetch http://httpredir.debian.org/debian/pool/main/u/u-boot/u-boot-tools_2014.10+dfsg1-5_armhf.deb Error reading from server. Remote end closed connection [iP: 128.31.0.66 80]â”€â”€â”€â”€â”€â”€â”€â”€â”€â”€â”˜

E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?

This is either a network problem or autoselected mirror problem, and this is when apt-cacher is useful, but for some reason it doesn't start properly on your system.

First, you need to delete cache files from output/cache/rootfs

After that, try reinstalling apt-cacher-ng

sudo apt-get purge apt-cacher-ng; sudo apt-get install apt-cacher-ng
sudo systemctl start apt-cacher-ng

And building without NO_APT_CACHER=yes

If there are errors still, you will need to find Debian mirror that will work for you and put it in userpatches/lib.config like this:

DEBIAN_MIRROR='ftp2.fr.debian.org/debian'

or

DEBIAN_MIRROR='ftp.fr.debian.org/debian'

and use this setting with NO_APT_CACHER=yes

Pascal · July 14, 2016

Hello

I try to uninstall apt-cacher-ng and install it again ... and remove NO_APT_CACHER=yes

No change

I try to find "userpatches/lib.config" somewhere .....but i didn't find it

But after looking error message a long time , i tell me that apt-cacher-ng wasn't the problem ( perhaps )

Too much error when compiling extra application ( hostapd , lirc etc ).

I set in compile.sh the parameter EXTERNAL="no" instead of "yes" , save it, and run compile.sh

A miracle append !!! All compilation process finished ... I try after rebooting my computer , with and without lot of running applications( chromium , thunderbird , geany, xfe, etc ...)

It work well all the time ....I can obtain my image.raw exepting external applications .... It's a solution , not the most beautiful but it's one

Perhaps there is something to adjust in the compiling "external application" script ....or not ....i don't know but for me it's good

I must tell to the Armbian community something .

Igor, you ( Zador ) and all the team inside this forum are wonderful peoples , your work is amazing .

And if you haven't the solution your can give some way to investigate .... :thumbup:

Thanks you for all and to be patient with newbies like me ...and with my bad english too

wildcat_paris · July 14, 2016

Bonjour Pascal,

Don't worry because Igor, Zador.blood.stain, TK have already to deal with the French wildcat_paris.

Have fun with Armbian = Amuse toi bien et pense Ã Virtualbox

Cordialement,

Guillaume

Pascal · July 15, 2016

I dont like virtualbox ....but if i must use it ...i ll use it .....but compilation time will explose !!

wildcat_paris · July 15, 2016

I dont like virtualbox ....but if i must use it ...i ll use it .....but compilation time will explose !!

@Pascal

As zador.blood.stain does, you can use a spare low-end laptop to install a fresh Ubuntu 14.04 or 16.04 and dedicate the laptop for this.

Zador.blood.stain has spent a lot of time to optimize the processes (like ccache to reduce compilation time) so Armbian tool is affordable for many users around the world.

Zador.blood.stain -- yes cheers up :beer:

Sign In

[Lime/next/jessie/console] Armbian compilation stops

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Important Information