newguy11 Posted January 2, 2021 Posted January 2, 2021 Hi all, Happy New year! I have a 7" IPS 1024X600 touch screen that I finally got it to work on Raspberry PI with the following configuration: hdmi_cvt:1=1024 600 60 3 0 0 0 # uncomment to force a specific HDMI mode (this will force VGA) hdmi_group:1=2 hdmi_mode:1=87 hdmi_drive:1=2 The product link is here: https://www.amazon.com/dp/B07VNX4ZWY/ When I plug this item into Armbian, the screen just flashes ON and OFF, but for some reason, the login screen works with about 1" black border on either side. When I type in log in password, the screen starts flashing again. I tried cvt 1024 600 60, but nothing changed. This screen works fine with Android that comes with Orange PI 4B. I think configuration somewhere is missing or wrong. Also, what touch screen keyboard should I use? I tried to install Florence Virtual Keyboard, and I don't think it could start with Armbian desktop. Thanks for helping out.
JMCC Posted January 2, 2021 Posted January 2, 2021 If you provide more information, it is more likely that someone will be able to help you: kernel, distro, etc.Start with providing the output of "armbianmonitor -u", and also the output of those commands you mention (just saying "it does not work" is like saying nothing).Enviado desde mi moto g(6) plus mediante Tapatalk
Recommended Posts