rockchab Posted April 12, 2021 Posted April 12, 2021 Hi, hopefully my english and my linux skills are good enough (little bit experience with raspi and odroid i´ve setup Rock Pi 4 C with nvme boot from spi (first mmc) Armbian 21.02.3 Buster with Linux 5.10.21-rockchip64 after some difficulties to setup boot from nvme it is running on ADATA SX6000PNP when i perform reboot - mostly no reboot after disconnect power and reconnect no boot until i wait > 1 minute during the day i try sudo armbianmonitor - u and i get a link now when i use this command there is no more link serial console - i get no output but i can log in after a while Thanks
rockchab Posted April 14, 2021 Author Posted April 14, 2021 after new install Armbian 21.02.3 Focal with Linux 5.10.21-rockchip64 the same behaviour - reboot works from mmc but not reliable from nvme serial monitor - garbage during booting - after boot and a few keyboard hits - login appears an i can login shutdown process display clearly - then garbage again looks like changing of baud rate during boot process - used default 1500000 armbian monitor now works - http://ix.io/2W4u
jeyjey Posted May 10, 2021 Posted May 10, 2021 I noticed that if you reboot after an update there is nother kernel and there is another file set. So the boot doesn't perform. If you make an upgrade without the kernel upgrade the SBC reboots. I have to investigate. Did you find the way to perform a kernel upgrade?
Recommended Posts