orange pi mini 2 unable to get past uboot


 Share

0

Recommended Posts

i have orange pi mini 2 board that fails to go past uboot. i used buster and focal images from here. here is the uboot snippet:

 

U-Boot SPL 2021.04-armbian (May 06 2021 - 18:16:10 +0000)
DRAM: 1024 MiB
Trying to boot from MMC1


U-Boot 2021.04-armbian (May 06 2021 - 18:16:10 +0000) Allwinner Technology

CPU:   Allwinner H3 (SUN8I 1680)
Model: Xunlong Orange Pi 2
DRAM:  1 GiB
MMC:   mmc@1c0f000: 0, mmc@1c10000: 1
Loading Environment from FAT... Card did not respond to voltage select! : -110
In:    serial@1c28000
Out:   serial@1c28000
Err:   serial@1c28000
Net:   phy interface0
eth0: ethernet@1c30000
starting USB...
Bus usb@1c1b000:

nothing happens after this. i have tried with different sd cards with same results.  so i have a few quesions: is the board damaged? or i have used the wrong image or is there  some wrong configurations as the image and boards aren't exactly identical. 

Board: Orangepi Zero+ 2 H3
Link to post
Share on other sites

Armbian is a community driven open source project. Do you like to contribute your code?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

0