Orange pi PC ffmpeg with Cedrus264

[lam96pt]

I have a orange pi PC board that runs newest armbian 21.05 (kernel 5.10). 

I create a h264 video from v4l usb camera successfully with

ffmpeg -f v4l2 -channel 0 -video_size 1280x720 -i /dev/video1 -pix_fmt nv12 -r 30 -b:v 64k -c:v libx264 test.mp4

but fps is low (10 - > 15 fps) and 100 % cpu load.

When i used Cedrus264 encoder with:

 

ffmpeg -f v4l2 -channel 0 -video_size 1280x720 -i /dev/video1 -pix_fmt nv12 -r 30 -b:v 64k -c:v cedrus264 test.mp4

ffmpeg failed:

sudo ffmpeg-3.1.4 -f v4l2 -channel 0 -video_size 1280x720 -i /dev/video0 -pix_fmt nv12 -r 22 -qp 30 -c:v cedrus264 -c:a None night_video_test4_1920x1080.mp4
[sudo] password for lam:
ffmpeg version 3.1.4 Copyright (c) 2000-2016 the FFmpeg developers
  built with gcc 4.8 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.3)
  configuration: --prefix=/usr --enable-nonfree --enable-gpl --enable-version3 --enable-vdpau --enable-libx264 --enable-libmp3lame --enable-libpulse --enable-libv4l2 --enable-libcedrus264
  libavutil      55. 28.100 / 55. 28.100
  libavcodec     57. 48.101 / 57. 48.101
  libavformat    57. 41.100 / 57. 41.100
  libavdevice    57.  0.101 / 57.  0.101
  libavfilter     6. 47.100 /  6. 47.100
  libswscale      4.  1.100 /  4.  1.100
  libswresample   2.  1.100 /  2.  1.100
  libpostproc    54.  0.100 / 54.  0.100
Input #0, video4linux2,v4l2, from '/dev/video0':
  Duration: N/A, start: 109.484156, bitrate: 147456 kb/s
    Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 1280x720, 147456 kb/s, 10 fps, 10 tbr, 1000k tbn, 1000k tbc
File 'night_video_test4_1920x1080.mp4' already exists. Overwrite ? [y/N] y
[cedrus264 @ 0x16e0060] VE Open error.
Output #0, mp4, to 'night_video_test4_1920x1080.mp4':
    Stream #0:0: Unknown: none
    Metadata:
      encoder         : Lavc57.48.101 cedrus264
Stream mapping:
  Stream #0:0 -> #0:0 (rawvideo (native) -> h264 (cedrus264))
Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height

ffmpeg was builed from FFmpeg-Cedrus, I spent 5 days for searching solutions.

Please help me! 

Thanks all !

[ning]

does cedrus support encoding?

[lam96pt]

21 minutes ago, ning said:

does cedrus support encoding?

yes! Cedrus support both encoding and decoding