Fra Posted June 28, 2022 Share Posted June 28, 2022 Good morning, I've got a Libre Computer Renegade, with Amrbian Bullseye minimal (on an sd card) . Changing HDMI monitors (of different sizes and resolutions) the board does not adjust automatically the resolution, so, sometimes the display is unreadable because written are too small, and I can't set a resolution to beng able to use it. Surfing armbian docs, it seems to be an environment problems that could be solved by chanching u-boot parameters. I tried to enter in u-boot command shell but I can't. Pushing backspace while it is booting make no effect (tried also with serial console but it didn't work). How can I enter in u-boot environment to set an HDMI monitor resolution? Thanks in advance 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.