potz Posted September 6, 2015 Author Share Posted September 6, 2015 Hi, I checked the hardware with older installation (with LCD and non I2S-Audio) and WLAN is working. bananapi@lemaker ~ $ uname -a Linux lemaker 3.4.103 #4 SMP PREEMPT Thu Dec 18 12:55:58 CST 2014 armv7l GNU/Linux bananapi@lemaker ~ $ lsmod Module Size Used by sunxi_spdma 4796 1 sunxi_spdif 6481 1 sunxi_sndspdif 3405 0 sndspdif 3047 1 ft5x_ts 42276 0 ap6210 584133 0 mali_drm 2608 0 drm 209226 1 mali_drm mali 111427 0 ump 52415 1 mali bananapi@lemaker ~ $ bananapi@lemaker ~ $ cat /proc/asound/cards 0 [sunxicodec ]: sunxi-CODEC - sunxi-CODEC sunxi-CODEC Audio Codec 1 [sunxisndspdif ]: sunxi-sndspdif - sunxi-sndspdif sunxi-sndspdif bananapi@lemaker ~ $ iwconfig lo no wireless extensions. tunl0 no wireless extensions. wlan0 IEEE 802.11 Access Point: Not-Associated Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. bananapi@lemaker ~ $ A. Link to comment Share on other sites More sharing options...
Igor Posted September 6, 2015 Share Posted September 6, 2015 Try this kernel. I add the driver and recompile: http://mirror.igorpecovnik.com/test/linux-image-banana_4.3_armhf.deb It will remain in future upgrades. Use it with default Bananapro FEX. I hope we fixed the problem now. Link to comment Share on other sites More sharing options...
potz Posted September 6, 2015 Author Share Posted September 6, 2015 Try this kernel. I add the driver and recompile: http://mirror.igorpecovnik.com/test/linux-image-banana_4.3_armhf.deb It will remain in future upgrades. Use it with default Bananapro FEX. I hope we fixed the problem now. Thanks! But how should I use it? It's not an image for SD-card. Sorry! A. Link to comment Share on other sites More sharing options...
Igor Posted September 6, 2015 Share Posted September 6, 2015 Use latest and install this kernel over. dpkg -i xxxxx.deb Link to comment Share on other sites More sharing options...
potz Posted September 7, 2015 Author Share Posted September 7, 2015 Hi Igor! It works! I use the ap6210 driver. Last login: Mon Sep 7 22:04:05 2015 Load: 0.19, 0.22, 0.10 - Board: 42.7°C - Memory: 954Mb root@bananapi:~# iwconfig lo no wireless extensions. tunl0 no wireless extensions. wlan0 IEEE 802.11 ESSID:"xxxxxxxx" Mode:Managed Frequency:2.412 GHz Access Point: xx:vv:yy:zz:dd:vv Bit Rate=65 Mb/s Tx-Power:32 dBm Retry min limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off eth0 no wireless extensions. bond0 no wireless extensions. root@bananapi:~# uname -a Linux bananapi 3.4.108-banana #8 SMP PREEMPT Sun Sep 6 20:18:29 CEST 2015 armv7l GNU/Linux root@bananapi:~# root@bananapi:~# lsmod Module Size Used by bnep 14462 2 cpufreq_userspace 3524 0 ap6210 624553 0 a20_tp 3365 0 8021q 18593 0 garp 6072 1 8021q stp 2032 1 garp llc 5365 2 stp,garp sunxi_ir 4037 0 hidp 17640 0 rfcomm 58686 0 bt_gpio 2741 0 wifi_gpio 6375 1 bt_gpio hci_uart 25000 0 bluetooth 264185 12 bnep,hidp,hci_uart,rfcomm spidev 6366 0 root@bananapi:~# Now I have to test the Audio and LCD. Thanks! A. 1 Link to comment Share on other sites More sharing options...
Stefan aka a1d3s Posted October 6, 2015 Share Posted October 6, 2015 hey igor what do you change? i ran in same problem with dan-3.4.108 kernel Link to comment Share on other sites More sharing options...
Igor Posted October 6, 2015 Share Posted October 6, 2015 His kernel doesn't have this driver build in by default. Either use my kernel or add this patch: https://github.com/igorpecovnik/lib/blob/second/patch/kernel/wireless-bananapro.patch It used to be, but then it was removed: https://github.com/dan-and/linux-sunxi/commit/53d8c2caa8955d00d609beee073f0e14ec253a11 Link to comment Share on other sites More sharing options...
Stefan aka a1d3s Posted October 6, 2015 Share Posted October 6, 2015 https://github.com/EddyBeaupre/ap6210this the same as yours? i applied this an run a build dts is much easier, the only thing that not work is mali Link to comment Share on other sites More sharing options...
Igor Posted October 6, 2015 Share Posted October 6, 2015 I took that patch from Lemaker kernel source and they probably fork it from Eddy. I didn't check. Mali is not working, sun4i (A10) breaks, we need an extra gmac patch, ... I already start to prepare an alternative 3.4 branch, starting from linux-sunxi. I need to fix few patches, ... i'll put up this week no matter how far I will come. Link to comment Share on other sites More sharing options...
Recommended Posts