Cubietruck - USB OTG normal mode

[mosen]

Hello,

 

I want to use the OTG-Port of my cubietruck in normal host mode. According this conversation (link) I've changed script.bin. After that I've rebooted

[usbc0]
usb_used = 1
usb_port_type = 1
usb_detect_type = 0
usb_id_gpio = port:PH19<0><1><default><default>
usb_det_vbus_gpio = port:PH22<1><0><default><0>
usb_drv_vbus_gpio = port:PH17<1><0><default><0>
usb_restrict_gpio = port:PH00<1><0><default><0>
usb_host_init_state = 1
usb_restric_flag = 0
usb_restric_voltage = 3550000
usb_restric_capacity = 5

Unfortunately my cubietruck does not detect a USB-Device (e.g. USB-Stick).

Neither dmesg nor lsusb. The USB-Stick works fine in the regular USB-Ports.

 

I've installed the armbian image (Xenial Server - Vanilla 4.7.3-sunxi)

 

Do I have to apply more changes to get my stick working on the OTG-Port? 

 

Thank you in advance!

[gnasch]

script.bin or .fex is for 3.x legacy kernel.

for vanilla 4.x kernel you have to use device tree.

There is something about it at:

http://forum.armbian.com/index.php/topic/385-banana-pi-usb-otg/#entry16721

 

hth, gnasch

[zador.blood.stained]

On cubietruck with vanilla kernel OTG is working out of the box if you load at least 1 gadget module (i.e.g_serial), you don't need to edit anything.

[mosen]

OMG!

 

Guys, thank you so much for your help!