perchibald Posted November 4, 2022 Share Posted November 4, 2022 (edited) hello guys bluetooth stopped working uname -a Linux pinebook 5.15.76-rockchip64 #22.08.8 SMP PREEMPT Sun Oct 30 10:57:32 CET 2022 aarch64 GNU/Linux dmesg | grep Bluetooth [ 9.863147] Bluetooth: Core ver 2.22 [ 9.863249] Bluetooth: HCI device and connection manager initialized [ 9.863261] Bluetooth: HCI socket layer initialized [ 9.863266] Bluetooth: L2CAP socket layer initialized [ 9.863276] Bluetooth: SCO socket layer initialized [ 9.972130] Bluetooth: HCI UART driver ver 2.3 [ 9.972144] Bluetooth: HCI UART protocol H4 registered [ 9.972147] Bluetooth: HCI UART protocol BCSP registered [ 9.972218] Bluetooth: HCI UART protocol LL registered [ 9.972222] Bluetooth: HCI UART protocol ATH3K registered [ 9.972261] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 9.972460] Bluetooth: HCI UART protocol Intel registered [ 9.972609] Bluetooth: HCI UART protocol Broadcom registered [ 9.972646] Bluetooth: HCI UART protocol QCA registered [ 9.972649] Bluetooth: HCI UART protocol AG6XX registered [ 9.972688] Bluetooth: HCI UART protocol Marvell registered [ 12.322372] Bluetooth: hci0: command 0xfc18 tx timeout [ 20.450331] Bluetooth: hci0: BCM: failed to write update baudrate (-110) [ 20.450363] Bluetooth: hci0: Failed to set baudrate [ 20.799400] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.799435] Bluetooth: BNEP filters: protocol multicast [ 20.799461] Bluetooth: BNEP socket layer initialized blueman-manager blueman-manager 14.32.28 ERROR Manager:147 on_dbus_name_appeared: Default adapter not found, blueman-manager 14.32.28 ERROR Manager:151 on_dbus_name_appeared: No adapter(s) found, exitin stopped working after last system update Edited November 4, 2022 by perchibald 0 Quote Link to comment Share on other sites More sharing options...
ivan_holmes Posted November 20, 2022 Share Posted November 20, 2022 Hi, I'm experiencing the same problem. Rolling back to kernel pinebook 5.15.74-rockchip64 made Bluetooth work again. Cheers, Ivan 0 Quote Link to comment Share on other sites More sharing options...
River-mochi Posted November 29, 2022 Share Posted November 29, 2022 bluetooth is also not working for me in newest build. I have pinebook Pro. thanks any advice? 0 Quote Link to comment Share on other sites More sharing options...
River-mochi Posted December 9, 2022 Share Posted December 9, 2022 (edited) I used Armbian Build for Pinebook Pro laptop, Armbian 22.11 Jammy XFCE Nov 30, 2022. built onto SD card. Booted to Armbian SD card used armbian-config installed Bluetooth from armbian-config I saw icon show on on the task bar , when i clicked it to start Bluetooth, it crashed. I tried Removing and Installing Bluetooth many times and shutting down and restarting laptop. the Bluetooth Icon does no appear in the task bar. and the blueman-manager and adapter do not open when I type them in the run box. Bluetooth hardware works on this pinebook Pro Laptop, but only when i tried things like Manajaro XFCE And KDE on Emmc . on manjaro, Bluetooth works on both of those and I see icon in task bar and I connected 3 different bluetooth /BLE devices. It just doesn't work for Armbian i have freshly loaded. I also tried 4 different SD cards now all with armbian. Other things run fine, Internet , wifi, etc, just not the Bluetooth. Only on Armbian, I'm not seeing the Bluetooth Icon in taskbard and Blueman keeps crashing. I have uninstalled and reinstalled it at least 10 times now using armbian-config. I also checked did armbian Updates. Nothing will bring the bluetooth icon back and I can't connect devices (bluetooth hardware seems to work fine on other distros with same laptop). is this a Bug or something I am doing wrong with the Install of Bluetooth? Edited December 9, 2022 by River-mochi 0 Quote Link to comment Share on other sites More sharing options...
River-mochi Posted December 9, 2022 Share Posted December 9, 2022 @ivan_holmes I just tried from inside armbian-config to roll back to older kernel 5.15.74-rockchip64 and it soft bricked the Pinebook Pro. how did you install 5.15.74 did you do it from inside of the armbian-config , others to switch kernel (since that did not work for me). or some other method? I now have newest Armbian Gnome SD card booted up on PbPro using the EMMC switch trick (emmc switch off, hit power button, count 2-3 seconds , push switch back on). on SD boot, Armbian Gnome , Bluetooth also does not work, using the Gui settings, no matter how many times I hit Bluetooth on, it doesn't turn on. Are there any command line options I could check? 0 Quote Link to comment Share on other sites More sharing options...
koftikes Posted December 14, 2022 Share Posted December 14, 2022 10.12.2022 в 00:17, River-mochi сказал: I just tried from inside armbian-config to roll back to older kernel 5.15.74-rockchip64 and it soft bricked the Pinebook Pro. how did you install 5.15.74 did you do it from inside of the armbian-config , others to switch kernel (since that did not work for me). or some other method? Downgrade from armbian-config, broke boot for me too Just take image from https://imola.armbian.com/archive/pinebook-pro/archive/ for example https://imola.armbian.com/archive/pinebook-pro/archive/Armbian_22.08.1_Pinebook-pro_bullseye_current_5.15.63.img.xz and don't forget "armbian-config -> System -> Freeze" for prevent kernel update 0 Quote Link to comment Share on other sites More sharing options...
River-mochi Posted December 14, 2022 Share Posted December 14, 2022 thanks @koftikes I had no idea what the armbian-config system freeze was for. 0 Quote Link to comment Share on other sites More sharing options...
ckohn Posted February 21, 2023 Share Posted February 21, 2023 I am running Armbian 22.11 on my PineBook Pro from both eMMC and SD and have installed the latest upgrades. It is now the end of February and I have still not found any way to get BlueTooth or the camera to work. If anyone has a solution, I sure would appreciate some insight. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.