suchende Posted December 8, 2022 Share Posted December 8, 2022 (edited) U-Boot 2017.05-armbian (Nov 30 2022 - 10:45:39 +0000) for ODROID-XU4 CPU: Exynos5422 @ 800 MHz Model: Odroid XU4 based on EXYNOS5422 Board: Odroid XU4 based on EXYNOS5422 Type: xu4 DRAM: 2 GiB MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 MMC Device 0 ( SD ): 59.5 GiB Card did not respond to voltage select! mmc_init: -95, time 11 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. Press quickly 'Enter' twice to stop autoboot: 0 ** File not found /boot.ini ** ## Executing script at 43e00000 Wrong image format for "source" command 12548 bytes read in 44 ms (278.3 KiB/s) ## Executing script at 43e00000 111 bytes read in 33 ms (2.9 KiB/s) 6724096 bytes read in 550 ms (11.7 MiB/s) 11217705 bytes read in 881 ms (12.1 MiB/s) 0 bytes read in 45 ms (0 Bytes/s) Found mainline kernel configuration ** File not found /boot/dtb/exynos5422-odroidhc1.dtb ** ** Unrecognized filesystem type ** ** File not found dtb/exynos5422-odroidhc1.dtb ** libfdt fdt_check_header(): FDT_ERR_BADMAGIC No FDT memory address configured. Please configure the FDT address via "fdt addr <address>" command. Aborting! Kernel image @ 0x40008000 [ 0x000000 - 0x669a00 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 11217641 Bytes = 10.7 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ERROR: Did not find a cmdline Flattened Device Tree Could not find a valid device tree ** File not found /boot.scr ** ## Executing script at 43e00000 ** Invalid partition 2 ** ## Executing script at 43e00000 ** Invalid partition 2 ** ## Executing script at 43e00000 ** Invalid partition 2 ** ## Executing script at 43e00000 mmc_init: -110, time 120 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... starting USB... USB0: USB EHCI 1.00 USB1: Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.00 USB2: Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 1 for devices... cannot reset port 1!? 1 USB Device(s) found scanning bus 2 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found USB device 0: unknown device Waiting for Ethernet connection... done. BOOTP broadcast 1 the boot fails after switching the kernel through armbian-config. Further investigation needed. //Edit 1: the dtb file is missing. ls -la /boot insgesamt 32336 drwxr-xr-x 2 root root 4096 8. Dez 19:03 . drwxr-xr-x 21 root root 4096 12. Jan 2022 .. -rw-r----- 1 root root 111 8. Dez 18:47 armbianEnv.txt -rw-r----- 1 root root 0 29. Dez 2021 armbianEnv.txt.out -rw-r--r-- 1 root root 1536 7. Aug 2019 armbian_first_run.txt.template -rw-r--r-- 1 root root 38518 7. Aug 2019 boot.bmp -rw-r--r-- 1 root root 4882 7. Aug 2019 boot-desktop.png -rw-rw-r-- 1 root root 12548 7. Aug 2019 boot.ini -rw-r----- 1 root root 0 29. Dez 2021 boot.ini.out -rw-r--r-- 1 root root 190980 30. Nov 12:07 config-6.0.9-odroidxu4 lrwxrwxrwx 1 root root 21 6. Dez 18:42 dtb -> dtb-5.4.225-odroidxu4 lrwxrwxrwx 1 root root 22 15. Apr 2020 dtb.old -> dtb-4.14.176-odroidxu4 -rw-r--r-- 1 root root 11217641 8. Dez 19:03 initrd.img-6.0.9-odroidxu4 -rw-r--r-- 1 root root 0 8. Dez 19:03 .next -rw-r--r-- 1 root root 3672734 30. Nov 12:07 System.map-6.0.9-odroidxu4 lrwxrwxrwx 1 root root 23 8. Dez 19:03 uInitrd -> uInitrd-6.0.9-odroidxu4 -rw-r--r-- 1 root root 11217705 8. Dez 19:03 uInitrd-6.0.9-odroidxu4 -rwxr-xr-x 1 root root 6724096 30. Nov 12:07 vmlinuz-6.0.9-odroidxu4 lrwxrwxrwx 1 root root 23 8. Dez 19:03 zImage -> vmlinuz-6.0.9-odroidxu4 It seems that the armbian-config does not install the dtb and because of its enforced reboot, it kills the boot process. Edited December 8, 2022 by suchende 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.