Recently acquired an Espressobin Ultra. When I attach an ssd (a Kingston 500GB NVMe 2280 M.2) to it the device won't start. It displays no sign of powering on. I have tried two different SSDs. no difference.
Without one attached as soon as power sis applied all the ethernet interface LEDs flash briefly. With the SSD card that doesn't happen. There is no activity at the console.
Do I need to change jumpers or do some other setting at the Marvell prompt before attaching it?
You can post now and register later.
If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.
Question
L.A.
Recently acquired an Espressobin Ultra. When I attach an ssd (a Kingston 500GB NVMe 2280 M.2) to it the device won't start. It displays no sign of powering on. I have tried two different SSDs. no difference.
Without one attached as soon as power sis applied all the ethernet interface LEDs flash briefly. With the SSD card that doesn't happen. There is no activity at the console.
Do I need to change jumpers or do some other setting at the Marvell prompt before attaching it?
Help would be much appreciated.
Many thanks
LA.
Link to comment
Share on other sites
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.