MikePooh Posted June 27, 2023 Share Posted June 27, 2023 I switched mentioned pins to IN mode. And it is seems they are pulled up by default. +-----+-----+----------+------+---+-Orange Pi+---+---+------+---------+-----+--+ | BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM | +-----+-----+----------+------+---+----++----+---+------+----------+-----+-----+ | | | 3.3v | | | 1 || 2 | | | 5v | | | | 12 | 8 | SDA.0 | IN | 1 | 3 || 4 | | | 5V | | | | 11 | 9 | SCL.0 | IN | 1 | 5 || 6 | | | 0v | | | If physically connect that pins to the ground it shows 0 level. But I need it 0 by default. All other pins which are not related to I2C/TWI I can easilly pullup/pulldown, but these not. i2c0 is disabled in armbiaEnv.txt Thank you. 0 Quote Link to comment Share on other sites More sharing options...
MikePooh Posted June 27, 2023 Author Share Posted June 27, 2023 If I understand correctly PA11 and PA12 are connected to +3.3V through 2.2k resistor on Orange Pi PC Plus. That means that it is impossible to use internal pull-up. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.