PROSB3000. AllWinner H313 , 2GB RAM, 16GB Internal storage, sun50iw9p1

[LinuxBoxer]

Looking for Linux for this X96 TVBox variant, model PROB3000 2GB DDRIII + 16 GB eMMC

 

https://www.google.com/search?q=PROSB-3000%2F16

 

Tag on board: BA301 v1.3 XR819 NJ 2+16

 

CPU: Allwinner h313 (H616 datasheet covers H313, just higher clock and 4GB RAM support: https://linux-sunxi.org/images/3/30/H616_Datasheet_V1.0.pdf )

MCP> LPDDR3 SDRAM + eMMC chip: Samsung KMR8X000IM-B608 ( https://file2.dzsc.com/product/20/05/07/1115580_113217385.pdf )

WLAN chip: XR819 ( https://linux-sunxi.org/images/8/8f/XR819_Datasheet_V1.0-EN.pdf )

 

 

 

 

 

 

Edited August 1, 2023 by LinuxBoxer

[LinuxBoxer]

Looks like a kind of X96Q variant.

 

PMU: AXP313A

 

[javaxsousa]

my tv box uses the same chip,Ik316=h313, but when I use the h616 image it gives the following error

 

U-Boot SPL 2021.04 (May 25 2023 - 13:06:08 +0200)
DRAM:This DRAM setup is currently not supported.

 

Attached I send the boot log and the images of my tvbox

bootik316.txt

[SteeMan]

31 minutes ago, javaxsousa said:

when I use the h616 image

What exact image are you using?

[javaxsousa]

i used this image:  Armbian_23.5.2_Orangepizero2_bookworm_current_6.1.30

[LinuxBoxer]

On 8/23/2023 at 4:54 PM, javaxsousa said:

Attached I send the boot log

Lots of fails, that firmware is improper for your hardware, and your hardware is older and not even similar to this one in this post. Better open a separate post and add more photos, I think there are missing chips in your photo. Your PMU is pictured as AXP305 and your log says "Unknown PMU AXP806" ? Very different circuit and chipset.

[George Zhavoronkov]

Hello! I also have such a console and can’t run the orange Pi zero2, Bigtreetech-cb1 images.
Error:
 

U-Boot SPL 2023.10-armbian (Oct 14 2023 - 01:14:07 +0000) 
DRAM:This DRAM setup is currently not supported. 
resetting...

 

[LinuxBoxer]

Your board seems the same, your ram/emmc chip is a Micron model instead of the Samsung eMMC+LPDDR3, not sure about full compatibility between both.

[djoness]

Hi.
First of all, I would like to congratulate you on this forum and the enormous work you do to keep it up to date.
I just got an X96Q, it has a CPU: Allwinner H313, I would like to know how to install Armbian on it, thanks in advance.

[Juliano Schmitt]

Hi, is there a image available for this model (prosb3000)? Or we need build one?

[SteeMan]

@Juliano Schmitt https://forum.armbian.com/topic/16976-status-of-armbian-on-tv-boxes-please-read-first

 

[DrEaD]

Quote

 

Hi, sorry my english

Did you got a working system?

I can boot MiniArch-20231112-6.7.4-board-h313.x96_q_lpddr3-SD-Image but ethernet won't work and MiniArch-20231112-6.7.4-board-h616.tanix_tx6s_axp313-SD-Image won't boot..

 

I'm in hope to get Klipper work on this tvbox

 

[DrEaD]

I get all working with USB Tethering, after install miniarch WiFi works...

[Othmen chargui]

How to connect with usb tethering please.  And ethernet work after install or only wifi 

[DrEaD]

Quote

 

Connect usb cable into an Android smartphone and select "USB Thetering" in smartphone... But in new release(v20240522) Ethernet was showing working(not tested), and wifi too(tested).

 

I've give up because can't add CAN network module(don't know how), this is necessary to run my project (3d printer with klipper and can toolhead).

 

[Othmen chargui]

Thank you friend 

Usb thetering done

Install done 

After installing endeavouros 

How to boot to os 

[DrEaD]

You need install lightdm manually, welcome to Arch world, everything need medium/advanced knowledge in linux... 😅

[Othmen chargui]

Could you help me

This is my first time using it

Thank you 

[Othmen chargui]

I have a question ❓️ 

If I found driver ethernet 

I can Install on miniarch

I don't need to install endeavouros