How to install armbian in h618?

[Nick A]

What’s the error this time?

[svyatoslav]

The directory is incorrectly specified

[Nick A]

Is this an error in the build or installing jammy?

[svyatoslav]

installations

[979101h]

@Nick A It works perfectly now. Thanks a ton

[979101h]

@Nick A It works perfectly now. Thanks a ton!

[979101h]

@Nick A It works perfectly now. Thanks a ton!

[Alfi ciio]

Quote

 

sudo update-alternatives --set iptables /usr/sbin/iptables-legacy

sudo update-alternatives --set ip6tables /usr/sbin/ip6tables-legacy

 

@Nick A Thanks a lot, this helps me as well

[svyatoslav]

I have already created a new virtual machine. And again an error.

[Werner]

https://github.com/armbian/build/blob/9ff15f78966871bd737f0c8cbd23ee9fdb767b8d/lib/functions/host/prepare-host.sh#L48-L58

setting locale seem to fail.

For the BTF thing either give the vm more memory (>8G), disable or enforce it as mentioned in the image and risk getting OOM killed.

[svyatoslav]

then there is no more option, all that's left is to accept it

[svyatoslav]

I figured out the audio, the problem was in the hdim cable.

did not solve the problem with usb wifi, usb MT7601U Wireless Adapter. how to make it work?

[Nick A]

I see this isn't set. I'll change it and make a new image for you. 

https://github.com/NickAlilovic/build/blob/v20250306/config/kernel/linux-sunxi64-edge.config

# CONFIG_WLAN_VENDOR_MEDIATEK is not set

 

CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_MT7601U=m

 

https://cateee.net/lkddb/web-lkddb/WLAN_VENDOR_MEDIATEK.html

 

@svyatoslav

https://github.com/NickAlilovic/build/releases/download/20250306/Armbian-unofficial_25.05.0-trunk_X98h_bookworm_edge_6.12.11_xfce_desktop.img.xz

 

You might need the firmware for it.. 

https://forum.odroid.com/viewtopic.php?p=371686&sid=626a6750240ccb1b690a1e2c6e0eba88#p371686

Edited 22 hours ago by Nick A

[svyatoslav]

Thanks Nick A!!!
wifi worked, immediately upon loading it offered to choose a network name.
all that's left is to find a usb-hab and it can be used as a children's PC.
thanks to everyone who helped with advice and action, thanks for being understanding.

[Rodrigo Campos]

@Alfi ciio, did you try to change the PRETTY_NAME on os-release file? It should be "Debian GNU/Linux 12 (bookworm)" to install HA Supervisor

 

[Rodrigo Campos]

On 4/29/2025 at 9:00 PM, Nick A said:

@Rodrigo Campos have you tried my latest images? There’s a new patch for dram detection

Hi @Nick A, sorry my late answer. I can't directly use your image, because my box is that boot-secure. I need to compile it every time I want to update, so my last build have about 4 months, but I think that time it just have a "new patch for dram" unless have a other new dram patch. Anyway, I'll try to build it again to try. If you have any additional tip to this, I'll appreciate. Thanks again for all your efforts.

[Nick A]

@Rodrigo Campos the patch is less then three months old. If you need secure boot i have the steps here. You just need to edit the defconfig patch for the board you are using. 

 

 

[Rodrigo Campos]

5 hours ago, Nick A said:

If you need secure boot i have the steps here

Yes, you already teach me how to make a patch to use secure boot and it works fine.

Anyway, the ram patch didn't work. I build a new image now and it still shows only 2GB instead of 4GB. Maybe I miss a step to apply this patch?. The strange thing is that u-boot shows 4GB, than kernel shows 2GB in boot log. Even with a half of memory it works very well.

Edited 57 minutes ago by Rodrigo Campos