svyatoslav Posted Wednesday at 06:27 PM Posted Wednesday at 06:27 PM The directory is incorrectly specified 0 Quote
Nick A Posted Wednesday at 06:37 PM Posted Wednesday at 06:37 PM Is this an error in the build or installing jammy? 0 Quote
979101h Posted Thursday at 03:33 AM Posted Thursday at 03:33 AM @Nick A It works perfectly now. Thanks a ton 0 Quote
979101h Posted Thursday at 03:33 AM Posted Thursday at 03:33 AM @Nick A It works perfectly now. Thanks a ton! 0 Quote
979101h Posted Thursday at 03:33 AM Posted Thursday at 03:33 AM @Nick A It works perfectly now. Thanks a ton! 0 Quote
Alfi ciio Posted Thursday at 09:06 AM Posted Thursday at 09:06 AM Quote sudo update-alternatives --set iptables /usr/sbin/iptables-legacy sudo update-alternatives --set ip6tables /usr/sbin/ip6tables-legacy @Nick A Thanks a lot, this helps me as well 0 Quote
svyatoslav Posted Thursday at 12:10 PM Posted Thursday at 12:10 PM I have already created a new virtual machine. And again an error. 0 Quote
Werner Posted Thursday at 12:58 PM Posted Thursday at 12:58 PM https://github.com/armbian/build/blob/9ff15f78966871bd737f0c8cbd23ee9fdb767b8d/lib/functions/host/prepare-host.sh#L48-L58 setting locale seem to fail. For the BTF thing either give the vm more memory (>8G), disable or enforce it as mentioned in the image and risk getting OOM killed. 0 Quote
svyatoslav Posted Thursday at 01:11 PM Posted Thursday at 01:11 PM then there is no more option, all that's left is to accept it 0 Quote
svyatoslav Posted Thursday at 06:58 PM Posted Thursday at 06:58 PM I figured out the audio, the problem was in the hdim cable. did not solve the problem with usb wifi, usb MT7601U Wireless Adapter. how to make it work? 0 Quote
Nick A Posted Thursday at 08:40 PM Posted Thursday at 08:40 PM (edited) I see this isn't set. I'll change it and make a new image for you. https://github.com/NickAlilovic/build/blob/v20250306/config/kernel/linux-sunxi64-edge.config # CONFIG_WLAN_VENDOR_MEDIATEK is not set CONFIG_WLAN_VENDOR_MEDIATEK=y CONFIG_MT7601U=m https://cateee.net/lkddb/web-lkddb/WLAN_VENDOR_MEDIATEK.html @svyatoslav https://github.com/NickAlilovic/build/releases/download/20250306/Armbian-unofficial_25.05.0-trunk_X98h_bookworm_edge_6.12.11_xfce_desktop.img.xz You might need the firmware for it.. https://forum.odroid.com/viewtopic.php?p=371686&sid=626a6750240ccb1b690a1e2c6e0eba88#p371686 Edited Thursday at 10:33 PM by Nick A 0 Quote
svyatoslav Posted yesterday at 06:14 AM Posted yesterday at 06:14 AM Thanks Nick A!!! wifi worked, immediately upon loading it offered to choose a network name. all that's left is to find a usb-hab and it can be used as a children's PC. thanks to everyone who helped with advice and action, thanks for being understanding. 0 Quote
Rodrigo Campos Posted yesterday at 01:32 PM Posted yesterday at 01:32 PM @Alfi ciio, did you try to change the PRETTY_NAME on os-release file? It should be "Debian GNU/Linux 12 (bookworm)" to install HA Supervisor 0 Quote
Rodrigo Campos Posted yesterday at 01:46 PM Posted yesterday at 01:46 PM On 4/29/2025 at 9:00 PM, Nick A said: @Rodrigo Campos have you tried my latest images? There’s a new patch for dram detection Hi @Nick A, sorry my late answer. I can't directly use your image, because my box is that boot-secure. I need to compile it every time I want to update, so my last build have about 4 months, but I think that time it just have a "new patch for dram" unless have a other new dram patch. Anyway, I'll try to build it again to try. If you have any additional tip to this, I'll appreciate. Thanks again for all your efforts. 0 Quote
Nick A Posted yesterday at 02:13 PM Posted yesterday at 02:13 PM @Rodrigo Campos the patch is less then three months old. If you need secure boot i have the steps here. You just need to edit the defconfig patch for the board you are using. 0 Quote
Rodrigo Campos Posted yesterday at 07:38 PM Posted yesterday at 07:38 PM (edited) 5 hours ago, Nick A said: If you need secure boot i have the steps here Yes, you already teach me how to make a patch to use secure boot and it works fine. Anyway, the ram patch didn't work. I build a new image now and it still shows only 2GB instead of 4GB. Maybe I miss a step to apply this patch?. The strange thing is that u-boot shows 4GB, than kernel shows 2GB in boot log. Even with a half of memory it works very well. Edited yesterday at 07:39 PM by Rodrigo Campos 0 Quote
Nick A Posted 21 hours ago Posted 21 hours ago @Rodrigo Campos The patch is only for uboot and it’s already in my newer builds. I guess there’s an issue with the kernel. 0 Quote
Rodrigo Campos Posted 19 hours ago Posted 19 hours ago 1 hour ago, Nick A said: @Rodrigo Campos The patch is only for uboot and it’s already in my newer builds. I guess there’s an issue with the kernel. Yes, maybe. There are a way to make a similar patch for kernel instread of u-boot? In Android, the boot logo show some parameters like DRAM_VCC, DRAM_CLK, Chip id, Param1, param2 and tpr113 , it helps? Tanks for your time. [626]HELLO! SBOOT is starting! [629]sboot commit : 4b34f2890a [632]set pll start [634]periph0 has been enabled [637]set pll end [641]unknow PMU [642]unknow PMU [646]PMU: AXP1530 [650]dram return write ok [653]board init ok [655]enable_jtag [656]DRAM BOOT DRIVE INFO: V0.651 [660]the chip id is 0x2000 [662]chip id check OK [684]DRAM_VCC set to 1500 mv [687]DRAM CLK =648 MHZ [689]DRAM Type =3 (3:DDR3,4:DDR4,7:LPDDR3,8:LPDDR4) [697]Actual DRAM SIZE =4096 M [700]DRAM SIZE =4096 MBytes, para1 = 310b, para2 = 10000000, dram_tpr13 = 6041 [709]DRAM simple test OK. [711]rtc standby flag is 0x0, super standby flag is 0x0 [717]dram size =4096 [719]Use rtc to store dram tuning para [723][mmc]: mmc driver ver 2021-10-12 13:56 [727][mmc]: b mmc 2 bias 4 [735][mmc]: Wrong media type 0x0, but host sdc2, try mmc first [741][mmc]: ***Try MMC card 2*** [770][mmc]: RMCA OK! [773][mmc]: MMC 5.1 [775][mmc]: HSSDR52/SDR25 8 bit [778][mmc]: 50000000 Hz [780][mmc]: 119280 MB [782][mmc]: ***SD/MMC 2 init OK!!!*** [858]read toc1 from emmc 32800 sector [862]OLD version: 0.0 [864]NEW version: 0.0 [870]don't have rotpk, skip check [941]load rotpk hash [1204]load vbmeta_a-key hash [1207]load vbmeta_a hash [1214]load vbmeta_b-key hash [1217]load vbmeta_b hash [1220]monitor entry=0x48000000 [1223]uboot entry=0x4a000000 [1226]optee entry=0x48600000 [1229]opensbi entry=0x0 [1231]no need rotpk flag [1234]tunning data addr:0x4a0003e8 [1239]run out of boot0 NOTICE: BL3-1: v1.0(debug):54937d5 NOTICE: BL3-1: Built : 17:44:59, 2021-12-13 NOTICE: BL3-1 commit: 8 NOTICE: cpuidle init version V2.0 NOTICE: secure os exist MESSAGE: [0x0] TEE-CORE: OP-TEE version: 5c40397e #1 Tue Feb 2 07:45:37 UTC 2021 arm NOTICE: BL3-1: Preparing for EL3 exit to normal world NOTICE: BL3-1: Next image address = 0x4a000000 NOTICE: BL3-1: Next image spsr = 0x1d3 U-Boot 2018.07-gb99798b4 (Apr 04 2023 - 13:23:26 +0000) Allwinner Technology [01.302]CPU: Allwinner Family [01.305]Model: sun50iw9 I2C: ready [01.313]DRAM: 4 GiB [01.322]Relocation Offset is: 70ecd000 [01.358]secure enable bit: 1 [01.360]smc_tee_inform_fdt failed with: ffffffff [01.365]pmu_axp152_probe pmic_bus_read fail [01.369]PMU: AXP1530 FDT ERROR:fdt_get_regulator_name:get property handle twi-supply error:FDT_ERR_INTERNAL [01.383]CPU=1416 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz MBus=400Mhz 0 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.