Information Tech Posted September 9, 2023 Share Posted September 9, 2023 I have and android Box with model#ZXV10 B760HS3 its bricked due to wrong firmware i am to go to maskrom mode but unable to flash any file while flashing when i enter update bulkcmd "setenv -f EnableSelinux permissive" i receive "AmlUsbReadStatus retusb = 1 Usb status not success" can some Guide me how can i make this thing alive 0 Quote Link to comment Share on other sites More sharing options...
SteeMan Posted September 9, 2023 Share Posted September 9, 2023 Moved to correct forum. Please read: The standard way to load firmwares on amlogic boxes is to use the Amlogic usb_burning_tool along with a male usb to male usb cable (along with the correct firmware of course). There are many examples on the internet of how to use this tool to burn an android firmware on an Amlogic tv box. 0 Quote Link to comment Share on other sites More sharing options...
Information Tech Posted September 9, 2023 Author Share Posted September 9, 2023 I didn't find any official IMG file for the my box any backup failed to restore . it will be very helpful to find the correct IMG file for My Device i tried a lot of firmware's using amlogic usb burning tool 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.