snadv Posted December 19, 2016 Share Posted December 19, 2016 Hi , I'm an beginner.I have M2+ and want to access GPIO by Python. Please suggest me that how to do that. thank you. Link to comment Share on other sites More sharing options...
tkaiser Posted December 19, 2016 Share Posted December 19, 2016 I'm not that familiar with GPIO stuff but you might try to check out Banana's WiringPi (branch BPI_M2P) from here and then follow these instructions. You should be aware that the vendor of your board is known to be ignorant and careless so in case you encounter troubles with their WiringPi please ask them what might have been wrong. It's already known that their own hardware description (fex) for BPi M2+ is wrong: https://forum.armbian.com/index.php/topic/1745-different-gpio-pin-mappings-on-bpi-m2-compared-to-orange-pis/ They also provide wrong schematics (wrong VDD_CPUX voltage is confirmed, maybe other stuff is wrong as well) and refrain from correcting known mistakes. Link to comment Share on other sites More sharing options...
snadv Posted December 20, 2016 Author Share Posted December 20, 2016 Thank a lot tkaiser. Your info is valuable. I'd change to use Orange pi board. Link to comment Share on other sites More sharing options...
Recommended Posts