Console on HDMI uses "half resolution"

[wraiths.patient]

armbianmonitor -u

hastebin - yadagozohu (armbian.com)

 

Using https://redirect.armbian.com/region/NA/orangepipc/Jammy_current image

 

Attached is the output from the serial console for uboot etc.

 

The console is using about half the vertical resolution, and a little under half the horizontal resolution of the HDMI monitor. In contrast, the orangepi.org built image is using the full resolution.

Image:

Orange Pi PC 2.0.8 based on Debian Buster

 

Kernel: 

root@orangepipc:~# uname -a
Linux orangepipc 5.4.65-sunxi #2.0.8 SMP Mon Oct 26 10:20:38 CST 2020 armv7l GNU/Linux

 

In Armbian, I've tried using 

extraargs=video=sunxi:1920x1080@60,monitor=hdmi,hpd=0,edid=0

in armbianEnv.txt

 

I've also tried using 

setenv video-mode sunxi:1920x1028@60,monitor=hdmi,hpd=0,edid=0
...

saveenv

in boot.cmd and recompile the boot.scr

mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr

and reboot twice. Still uses only "half resolution".

serial-console.log

Edited November 20, 2023 by wraiths.patient