Armbian in IK316-EMCP_v4.1

[Matheus Gomes]

I have an IK316-EMCP_v4.1 board, and I need to install Armbian on it. But there is no information on the internet about this card. 

 

If you have any information on how I can install Armbian, or any other Linux distro on this board, please let me know.

Edited December 12, 2023 by Matheus Gomes

[Werner]

Looks like picked from a random tvbox. Moved.

[Faheem]

still nobody find the solution of this board jumper pins its too much challenge for all engineers

[Nick A]

@Faheem try these images. I can’t see the AXP chip so I can’t tell you which one to try first.

https://github.com/NickAlilovic/build/releases/tag/20250306

Edited March 15, 2025 by Nick A

[Benedito Portela]

Hi @Faheem, are you do it armbian install and working in this board? I use rk3228 boxes and want know more about this H313 boards, i see a mx10 with this chip in aliexpress, but before to buy, i should want sure it working linux! 

The H313, is it too problematic so or not?

Thanks!

[marcosdsdba]

@Nick A Hi Nick, how are you? I have a motherboard identical to the one in the photo you posted, with an AXP313A. I tried the image you recommended, but the Wi-Fi didn't work. Could you give me any advice?

[sicxnull]

If you can pull the factory DTB from that board that would be great. I need it to get Wifi working 

[Nick A]

@marcosdsdba Can you take a picture or just tell us the Wi-Fi chip you have on your board?

[marcosdsdba]

@Nick A Wi-fi chip is SV6256P

Edited Monday at 12:00 PM by marcosdsdba

[Nick A]

@marcosdsdba the only driver that works is from kernel 4.4. Unless someone figures out a way to port this to a modern kernel, your only option is to use a usb wifi adapter.

[Nick A]

@marcosdsdba 

 

[marcosdsdba]

@Nick A Thank you very much, I'll try using it and get back to you if everything is okay. 

[marcosdsdba]

@sicxnull Yes, I can try to extract the DBT. How can I do that?

[sicxnull]

9 hours ago, marcosdsdba said:

@sicxnull Yes, I can try to extract the DBT. How can I do that?

 boot up armbian. check the /dev partition

You will see 

mmcblk0
mmcblk2,etc

The android image likely has many partitions. so you will see mmcblk2-9 etc, thats what we want

Go ahead and dump the first 250mb (probably more than needed but just in case) into an image file and upload it, i can extract the dtb from that

assuming mmcblk2 is what we want, you would run
 

sudo dd if=/dev/mmcblk2 of=mmcblk2-first250mb.img bs=1M count=250 status=progress

then upload that. 

[marcosdsdba]

@sicxnull I'm uploading it now and it will soon be available on my Google Drive at this link: https://drive.google.com/drive/folders/14Imqiz3u0qjLbLyDGkB0ratNn7k7-p6Z?usp=sharing

[sicxnull]

7 minutes ago, marcosdsdba said:

@sicxnull I'm uploading it now and it will soon be available on my Google Drive at this link: https://drive.google.com/drive/folders/14Imqiz3u0qjLbLyDGkB0ratNn7k7-p6Z?usp=sharing

DTB extracted. Thanks!

I should have some time this weekend to dig into getting wifi to work. @Nick A mentioned it might only work on kernel 4 so im unsure now but will see what i can do 

[Nick A]

@sicxnull 

 

[marcosdsdba]

@Nick A Is it possible to create an image using the driver that Kevin posted? Because I tried to compile it and couldn't, several errors with .h file paths and C language function errors. Even importing the include linux/timer.h, etc., several errors occurred and I couldn't compile it on the SD card running Armbian. I don't know if I did something wrong or if I need to do it differently.

[Nick A]

@marcosdsdba I would compile this on the box. Install kernel headers. Post the errors you are getting.

https://github.com/NickAlilovic/build/releases/download/20250306/linux-headers-edge-sunxi64_25.05.0-trunk_arm64__6.12.11-S62b2-Da873-P8a5c-C1abcH02eb-HK01ba-Vc222-B9bbb-R448a.deb

Edited 51 minutes ago by Nick A