Jaisere Posted January 11 Posted January 11 some info: The image I am using on my device is; Armbian_22.02.0-trunk_Rk322x-box_bullseye_legacy_4.4.194_minimal.img I chose this, as any of the other images from here; https://users.armbian.com/jock/rk322x/armbian/stable/ other than the xfce desktop image would lead to this happening: (if there's a fix for this I'd rather use one of the more up to date images) with the bullseye legacy minimal image set up on my device I then did this: yes | sudo apt update yes | sudo apt dist-upgrade yes | sudo apt --fix-missing yes | sudo apt install neofetch chromium xorg xfce4 lightdm sudo reboot heres the neofetch output if it helps with anything: user@rk322x-box:/lib/modules/4.4.194-legacy-rk322x/kernel/drivers/gpu/drm/rockchip$ neofetch _,met$$$$$gg. user@rk322x-box ,g$$$$$$$$$$$$$$$P. --------------- ,g$$P" """Y$$.". OS: Debian GNU/Linux 11 (bullseye) armv7l ,$$P' `$$$. Host: Generic RK322x TV Box board ',$$P ,ggs. `$$b: Kernel: 4.4.194-legacy-rk322x `d$$' ,$P"' . $$$ Uptime: 58 mins $$P d$' , $$P Packages: 564 (dpkg) $$: $$. - ,d$$' Shell: bash 5.1.4 $$; Y$b._ _,d$P' Resolution: 1920x1080p60 Y$$. `.`"Y$$$$P"' Terminal: /dev/pts/0 `$$b "-.__ CPU: Generic DT based system (4) @ 1.200GHz `Y$$ Memory: 228MiB / 962MiB `Y$$. `$$b. `Y$$b. `"Y$b._ `""" when looking into the drivers I can find these: user@rk322x-box:/lib/modules/4.4.194-legacy-rk322x/kernel/drivers/gpu/arm/mali400/mali$ ls mali.ko user@rk322x-box:/lib/modules/4.4.194-legacy-rk322x/kernel/drivers/gpu/drm/rockchip$ ls rockchip_drm_tve.ko this is expected. I am aware from other posts and threads in the forums that for Mali400 I should install the Lima driver for it; when trying to use mesa to set up both Lima and Permafrost it typically fails because of missing dependencies (that when I try to manually install cannot be found) or has no issues but when I look into the drivers/gpu/(arm or drm) directories there is nothing different from what I previously showed and if I look for lima or permafrost within lsmod the modules are not in the list. appears like this: user@rk322x-box:/lib/modules/4.4.194-legacy-rk322x/kernel/drivers/gpu/drm/rockchip$ lsmod Module Size Used by lz4 16384 4 lz4_compress 16384 1 lz4 gpio_ir_recv 16384 0 mali 233472 0 snd_soc_rk3228 16384 1 lzo 16384 4 zram 24576 2 fuse 94208 1 ip_tables 24576 0 autofs4 32768 2 as a side note: user@rk322x-box:~$ export "DISPLAY=:0" user@rk322x-box:~$ xset -dpms user@rk322x-box:~$ LIBGL_ALWAYS_SOFTWARE=1 glxinfo | grep "OpenGL vendor\|OpenGL renderer" OpenGL vendor string: Mesa/X.org OpenGL renderer string: llvmpipe (LLVM 11.0.1, 128 bits) (output is the same when the command does not contain LIBGL_ALWAYS_SOFTWARE=1) (this is how I would check the renderer, I typically check from ssh as its easier to type commands from my pc due to the small amount of space I have in my setup, however even when im using the terminal on the tv box without ssh the result it the same) any help would be appreciated. thank you
SteeMan Posted January 11 Posted January 11 Have you followed the instructions in the official rk322x thread: The link to builds you included above is some archived stuff, not current.
Jaisere Posted January 11 Author Posted January 11 @SteeMan Yeah I have followed the thread, read through it a couple times due to confusing results, as well as having issues with using builds other than the legacy images I mentioned
SteeMan Posted January 11 Posted January 11 Then that is the thread you should be asking your question, not starting a new thread.
Recommended Posts