CSC Armbian for RK322x TV box boards

[Amir Samadpour]

good morning/evening lads

can anyone help me on unbricking this?

already tried sd card with multitool , no boot with or without sd card(blue and red light are steady and doesn't get bright , no display).

 

looks like its an emmc chip

(i brick it on image burning process )

 

images of the board:

https://ibb.co/rRGxJfZ1
https://ibb.co/3524sZCQ
https://ibb.co/yBBNYmbG

[Euuaak]

Hello! It seems that there is some issue with the user files FTP server.

The multitool image should be acessessible from: https://users.armbian.com/jock/web/rk322x/multitool/
But it is present in: https://users.armbian.com/users.armbian.com/jock/web/rk322x/multitool/

[Kuroi Akuma]

Hi,

Anyone can help me?

My chip is rk3229, wifi is esp8089 26Mhz, running 6.12.63 trixie.

I followed most of the instructions here without hope. My dmesg said "esp8089: unknown parameter 'crystal_26M_en' ignored" for:

options esp8089 crystal_26M_en=1

and "esp8089: unknown parameter 'config' ignored" for:

option esp8089 config=crystal_26M_en=1

[RaptorSDS]

fast search found that 8089 use 40Mhz not 26 so its ignored https://lists.infradead.org/pipermail/linux-arm-kernel/2016-August/447345.html
was a talk on kernel developer , some 8089 ignore also 40Mhz some need also 8622 need some 26Mhz or not 

[Kuroi Akuma]

This is my wifi. On legacy image, wifi works if I edit /etc/modprobe.d/esp8089.conf to crystal_26M_en=1.

Edited January 3 by Kuroi Akuma

[jock]

2 hours ago, Kuroi Akuma said:

I followed most of the instructions here without hope. My dmesg said "esp8089: unknown parameter 'crystal_26M_en' ignored" for:

options esp8089 crystal_26M_en=1

and "esp8089: unknown parameter 'config' ignored" for:

option esp8089 config=crystal_26M_en=1

modprobe parameter should be crystal=1, not crystal_26M_en anymore (see here)

 

Otherwise you could try led-conf6 overlay (but I don't know if it fits your board...) which has the attribute esp,crystal-26M-en = <1> in the device tree to set the crystal to 26 MHz

[Kuroi Akuma]

Thank you. I'm gonna try that.

[rk32]

Hi,

So, Previously this massage (No emmc) appeared if the preinstalled Android was able to boot up completely and then restarted by repowering while the sdcard was inserted or the tvbox was rebooted while the sdcard was in the slot, however this got fixed if the device was powered off during the android bootanimation but after accidentally installing an incomplete image of latest armbian release I am no longer able to get the emmc working even after trying restarting at various boot levels.

I have found others experiencing the same issue in this post but according to the circumstances I am in I think my issue might have a different solution.

Any way through which this issue can be solved ?

This might help :

root@multitool:~# dmesg -T | grep mmc2

[Tue Jan 6 21:06:28 2026] mmc_host mmc2: Bus speed (slot 0) = 2343750Hz (slot req 400000Hz, actual 390625HZ div = 3)

[Tue Jan 6 21:06:28 2026] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)

[Tue Jan 6 21:06:28 2026] mmc2: Card stuck in programming state! __mmc_switch

[Tue Jan 6 21:06:28 2026] mmc2: error -110 whilst initialising MMC card

I have also attached the whole dmesg log and lsblk output if needed.

multitool-ssh-output.txt

[rk32]

Just to add, Armbian boots upto systemd and then gets stuck at loading some scripts.

This image gives some additional information. 

[rk32]

I solved the issue !

I flashed the latest armbian release raw image to the sdcard and plugged it in the TV box. It magically booted from the SDCard and now I have mmcblk2 as a block device. Now I can run armbian-install command to get everything going correctly.

[rk32]

Also, this TVBOX contains the less known S9012P wifi chip. However on this github repository some kind of unofficial driver support is available, can this driver get the wifi chip working on Armbian ?

[midi-sama]

Hello, im trying to get my rk322x board with SV6051P chip to work, i tried every LED config but wpa_supplicant crashes on boot every time.

Here are the dmesgs:
dmesg_led8.logdmesg_led7.logdmesg_led6.logdmesg_led5.logdmesg_led4.logdmesg_led3.logdmesg_led2.logdmesg_led1.logdmesg_default_dto.log

Anyway to fix this?

 

[toro2077]

mxq pro 4k

maybe "shortpin"

Hope it is useful

[Dangrain]

Hey there forum!

I've got this MXQ PRO 5G TV Box (Yes, I know It's been said the brand isn't important, but I figured I might as well say it anyways) thing a few days ago and, as you do, my first instinct was 'Let's linux it', which Is, as It turns out far more trouble than I had initially imagined. And frankly I am a little tired of slamming my head into a brick wall, repeating the same steps again and again so as a sort of last resort, I'm here to ask for your help (thanks in advance).

To check which image to download and what steps to follow I've opened the box to take a peek at It's board. As the main CPU, RK3228A, for the storage 128GB of eMMC, and for the memory 8GB of RAM (which exactly type, I can't discover).

Following the instructions on the first page of this topic, I downloaded an image, downloaded multitool, got my SD card. At first everything went according to the guide. Multitool flashed, the thing booted It and the partition expanded, then I shut it down and put the extracted .img into the 'images' folder, plug the card back in boot, flash, shut down once more and upon trying to boot, the LED stays off and doesn't turn on. After waiting for a solid 10 minutes I decide I'll just try booting it directly off the card. I flash It, plug it in and some images booted partially and some didn't. Some boot only to a certain point like starting a specific service (usually it got stuck after or during starting armbian-ramlog.service) and some just don't boot at all. I've tried disabling the services by manipulating the files on the card yet they just reappear again.

After that I noticed that upon each boot there's a quick 'error' that happens, returning different numbers seemingly depending on the image on the card, either Internal error: Oops: 805 [#1] SMP ARM, or Oops: 80000005 SMP ARM or just Oops 5 which as far as I could find meant something related to illegal instructions (specifically interrupts). I haven't really made any progress past that. Also, If It's of any help, I can provide images of the board (from both sides) and all of It's components.

Thanks in advance for all your help, friends!

 

 

[RaptorSDS]

vor 34 Minuten schrieb Dangrain:

MXQ PRO 5G TV Box (

 this looks like we mention many times that OPTEE or Secureboot interrupte the boot at diffirent time 

you say 128GB and 8 GB , thats not possible with rk3228 it can handle only 1GByte RAM (8Gbits)  (maybe you mean Gbit than 8Gbit = 1GByte Ram Looks ok )

[Dangrain]

> maybe you mean Gbit than 8Gbit = 1GByte Ram Looks ok

 

Oh yes, forgive me, I must've been mistaken!

Anywho, mind telling me what I can do about Secureboot or OPTEE you mention?

[RaptorSDS]

vor 7 Stunden schrieb Dangrain:

cureboot or OPTEE you mentio

please look herer , maybe some post later and newer 

Some OPTEE Loader work 1min , one 30min , 

 

 

in the past same game was with trustOS (bootloader) there are two or three diffirrent 
 

Edited 1 hour ago by RaptorSDS