Jean-Marc Posted March 2, 2017 Share Posted March 2, 2017 Hi, On cubieboard 1 with following config : cubieboard login: root Password:Linux cubieboard 4.9.7-sunxi #1 SMP Thu Feb 2 01:52:06 CET 2017 armv7l ____ _ _ _ _ / ___| _| |__ (_) ___| |__ ___ __ _ _ __ __| | | | | | | | '_ \| |/ _ \ '_ \ / _ \ / _` | '__/ _` | | |__| |_| | |_) | | __/ |_) | (_) | (_| | | | (_| | \____\__,_|_.__/|_|\___|_.__/ \___/ \__,_|_| \__,_| Welcome to ARMBIAN 5.25 stable Debian GNU/Linux 8 (jessie) 4.9.7-sunxi System load: 0.72 Up time: 49 sec Memory usage: 4 % of 1002Mb IP: 192.168.15.15 CPU temp: 36°C Usage of /: 8% of 15G After login as root, when i launch reboot command, system hang as follow : root@cubieboard:~# reboot [ OK ] Stopped target Sound Card. [ OK ] Removed slice system-ifup.slice. Stopping User Manager for UID 0... Stopping Authenticate and Authorize Users to Run Privileged Tasks... [ OK ] Stopped target Graphical Interface. Stopping Entropy daemon using the HAVEGE algorithm... [ OK ] Stopped target Multi-User System. Stopping Regular background program processing daemon... Stopping Network Manager... Stopping OpenBSD Secure Shell server... Stopping System Logging Service... Stopping D-Bus System Message Bus... [ OK ] Stopped target Login Prompts. Stopping Serial Getty on ttyS0... Stopping Getty on tty1... Stopping LSB: Start/stop sysstat's sadc... Stopping LSB: Starts LIRC daemon.... Stopping LSB: Start NTP daemon... Stopping LSB: Advanced IEEE 802.11 management daemon... Stopping LSB: Armbian gathering hardware information... Stopping LSB: Set sysfs variables from /etc/sysfs.conf... Stopping LSB: disk temperature monitoring daemon... Starting Store Sound Card State... Starting Unattended Upgrades... [ OK ] Stopped Entropy daemon using the HAVEGE algorithm. [ OK ] Stopped Regular background program processing daemon. [ OK ] Stopped Network Manager. [ OK ] Stopped OpenBSD Secure Shell server. [ OK ] Stopped System Logging Service. [ OK ] Stopped D-Bus System Message Bus. [ OK ] Stopped Authenticate and Authorize Users to Run Privileged Tasks. [ OK ] Stopped LSB: Load kernel modules needed to enable cpufreq scaling. [ OK ] Stopped target Basic System. [ OK ] Stopped target Slices. [ OK ] Removed slice User and Session Slice. [ OK ] Stopped target Paths. [ OK ] Stopped target Timers. [ OK ] Stopped target Sockets. [ OK ] Closed Syslog Socket. [ OK ] Closed D-Bus System Message Bus Socket. [ OK ] Stopped target System Initialization. Stopping Restore / save the current clock... [ OK ] Stopped target Encrypted Volumes. Stopping Update UTMP about System Boot/Shutdown... Stopping LSB: Raise network interfaces.... [ OK ] Stopped target Swap. Deactivating swap /var/swap... [ OK ] Stopped target Remote File Systems. [ OK ] Stopped target Remote File Systems (Pre). [ OK ] Stopped Restore / save the current clock. [ OK ] Stopped Update UTMP about System Boot/Shutdown. [ OK ] Deactivated swap /var/swap. Stopping Create Volatile Files and Directories... [ OK ] Stopped Create Volatile Files and Directories. [ OK ] Stopped LSB: Raise network interfaces.. Stopping Apply Kernel Variables... [ OK ] Stopped Apply Kernel Variables. Stopping Load Kernel Modules... [ OK ] Stopped Load Kernel Modules. Stopping Load/Save Random Seed... [ OK ] Stopped target Local File Systems. Unmounting /run/user/0... Unmounting /var/log... Unmounting /var/log.hdd... Unmounting /tmp... [ OK ] Stopped Load/Save Random Seed. [ OK ] Unmounted /run/user/0. [ OK ] Unmounted /var/log. [ OK ] Unmounted /var/log.hdd. [ OK ] Unmounted /tmp. [ OK ] Reached target Unmount All Filesystems. [ OK ] Stopped target Local File Systems (Pre). Stopping Create Static Device Nodes in /dev... [ OK ] Stopped Create Static Device Nodes in /dev. Stopping Remount Root and Kernel File Systems... [ OK ] Stopped Remount Root and Kernel File Systems. [ OK ] Reached target Shutdown. [ 62.764016] reboot: Restarting system U-Boot SPL 2017.01-armbian (Feb 02 2017 - 02:20:16) DR [ OK ] Stopped Serial Getty on ttyS0. [ OK ] Stopped Getty on tty1. [ OK ] Stopped User Manager for UID 0. [ OK ] Stopped LSB: Start/stop sysstat's sadc. [ OK ] Stopped LSB: Starts LIRC daemon.. [ OK ] Stopped LSB: Start NTP daemon. [ OK ] Stopped LSB: Advanced IEEE 802.11 management daemon. [ OK ] Stopped LSB: Armbian gathering hardware information. [ OK ] Stopped LSB: Set sysfs variables from /etc/sysfs.conf. [ OK ] Stopped LSB: disk temperature monitoring daemon. [ OK ] Started Store Sound Card State. [ OK ] Started Unattended Upgrades. Stopping LSB: set CPUFreq kernel parameters... [ OK ] Stopped target Network is Online. Stopping Login Service... [ OK ] Removed slice user-0.slice. [ OK ] Removed slice system-getty.slice. [ OK ] Removed slice system-serial\x2dgetty.slice. Stopping /etc/rc.local Compatibility... [ OK ] Stopped /etc/rc.local Compatibility. Stopping Permit User Sessions... [ OK ] Stopped Login Service. [ OK ] Stopped LSB: set CPUFreq kernel parameters. [ OK ] Stopped Permit User Sessions. [ OK ] Stopped target Network. Stopping LSB: Load kernel modules needed to enable cpufreq scaling... [ OK ] Stopped LSB: Load kernel modules needed to enable cpufreq scaling. [ OK ] Stopped target Basic System. [ OK ] Stopped target Slices. [ OK ] Removed slice User and Session Slice. [ OK ] Stopped target Paths. [ OK ] Stopped target Timers. [ OK ] Stopped target Sockets. [ OK ] Closed Syslog Socket. [ OK ] Closed D-Bus System Message Bus Socket. [ OK ] Stopped target System Initialization. Stopping Restore / save the current clock... [ OK ] Stopped target Encrypted Volumes. Stopping Update UTMP about System Boot/Shutdown... Stopping LSB: Raise network interfaces.... [ OK ] Stopped target Swap. Deactivating swap /var/swap... [ OK ] Stopped target Remote File Systems. [ OK ] Stopped target Remote File Systems (Pre). [ OK ] Stopped Restore / save the current clock. [ OK ] Stopped Update UTMP about System Boot/Shutdown. [ OK ] Deactivated swap /var/swap. Stopping Create Volatile Files and Directories... [ OK ] Stopped Create Volatile Files and Directories. [ OK ] Stopped LSB: Raise network interfaces.. Stopping Apply Kernel Variables... [ OK ] Stopped Apply Kernel Variables. Stopping Load Kernel Modules... [ OK ] Stopped Load Kernel Modules. Stopping Load/Save Random Seed... [ OK ] Stopped target Local File Systems. Unmounting /run/user/0... Unmounting /var/log... Unmounting /var/log.hdd... Unmounting /tmp... [ OK ] Stopped Load/Save Random Seed. [ OK ] Unmounted /run/user/0. [ OK ] Unmounted /var/log. [ OK ] Unmounted /var/log.hdd. [ OK ] Unmounted /tmp. [ OK ] Reached target Unmount All Filesystems. [ OK ] Stopped target Local File Systems (Pre). Stopping Create Static Device Nodes in /dev... [ OK ] Stopped Create Static Device Nodes in /dev. Stopping Remount Root and Kernel File Systems... [ OK ] Stopped Remount Root and Kernel File Systems. [ OK ] Reached target Shutdown. [ 62.764016] reboot: Restarting system U-Boot SPL 2017.01-armbian (Feb 02 2017 - 02:20:16) DR ---------------- And the only solution i can use is to disconnect PSU Thank in advance for your help Regards Link to comment Share on other sites More sharing options...
Igor Posted March 3, 2017 Share Posted March 3, 2017 It's u-boot related problem and most likely the problem was not caused by us. I have to check why it stops ... Workaround is to use this u-boot: http://apt.armbian.com/pool/main/l/linux-u-boot-cubieboard-next/linux-u-boot-next-cubieboard_5.23_armhf.deb Works fine for me. Link to comment Share on other sites More sharing options...
Jean-Marc Posted March 3, 2017 Author Share Posted March 3, 2017 Igor, Many thanks for your patch. I confirm that this new u-boot (but more older that previous) is ok also for me. Please note that this new u-boot is :..... [ OK ] Reached target Shutdown. [ 1256.035752] reboot: Restarting system U-Boot SPL 2016.09-armbian (Oct 23 2016 - 16:18:06) DRAM: 1024 MiB CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from MMC1 U-Boot 2016.09-armbian (Oct 23 2016 - 16:18:06 +0200) Allwinner Technology CPU: Allwinner A10 (SUN4I) Model: Cubietech Cubieboard I2C: ready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 Do you plan to integrate this old release in future cubieboard 1 ? Link to comment Share on other sites More sharing options...
Igor Posted March 3, 2017 Share Posted March 3, 2017 We tend to find a problem and move on with upstream version, perhaps this is already solved within dev version. Would need to check ...This is just a workaround.Wrote on mobile phone Link to comment Share on other sites More sharing options...
Otario Posted June 16, 2017 Share Posted June 16, 2017 Hi Igor, one question about linux-u-boot-next-cubieboard for v5.31: I have to revert to http://apt.armbian.com/pool/main/l/linux-u-boot-cubieboard-next/linux-u-boot-next-cubieboard_5.23_armhf.deb even after installing the latest armbian v5.31 version. Do you think there could be a solution in the future for this issue? Best regards, Otario (using Cubieboard 1, A10) Link to comment Share on other sites More sharing options...
Recommended Posts