Mantas22X Posted August 13 Share Posted August 13 I've been trying to run Armbian using the Armbian_community_24.8.0-trunk.554_Aml-s9xx-box_bookworm_current_6.6.45 image along with a 16GB Sandisk Ultra SD Card (flashed using balenaEtcher), and my main issue is initramfs not being able to mount /dev/mmcblk0p2 as a root file system. I've tried using the solution listed here, but it didn't work. How can I resolve this? 0 Quote Link to comment Share on other sites More sharing options...
SteeMan Posted August 13 Share Posted August 13 My recent experience is that current kernels are very picky about the type/quality of the SD card. So try different SD cards. That has solved the issue for me when I have run into this issue recently. 0 Quote Link to comment Share on other sites More sharing options...
Mantas22X Posted August 22 Author Share Posted August 22 That might work, but I currently don't have access to any other SD cards, just the 16GB Sandisk and a low quality chinese SD Card which can't fit the image. Would using an older kernel work? Thanks. 0 Quote Link to comment Share on other sites More sharing options...
Mantas22X Posted August 22 Author Share Posted August 22 Downgrading to Armbian_23.5.1_Aml-s9xx-box_bookworm_current_6.1.30.img from https://archive.armbian.com/ and using the s905x-s912 u-boot worked! 0 Quote Link to comment Share on other sites More sharing options...
SteeMan Posted August 22 Share Posted August 22 That confirms most likely that the problem was more recently introduced. If you have the time to do some testing to maybe narrow down where it might have stopped working that would be useful information for the community. So could you rest the current s905x-s912 uboot bin in your working setup to see if it was a uboot change that is the problem? And then could you install newer kernels through Armbian-config to pinpoint which kernel breaks things? 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.