Jump to content

X96 Max+ can't get it to boot with native Armbian


WayneGibbous

Recommended Posts

I was unable to get Armbian_community_24.11.0-trunk.66_Aml-s9xx-box_bookworm_current_6.6.47_minimal to boot on my TV-Box (X96Max+ 100 vA 4GBRAM). I tried using the meson-sm1-x96-air.dtb because this is the model I use for Coreelec. This did not boot at all, the system just boots to Android (Slimbox).

 

I also tried this image “Devmfc_Debian-Bookworm_6.6.49-meson64_Minimal-24.09.05.img” from this project: https://github.com/devmfc/debian-on-amlogic     This image at least tried to boot.  I got a blue screen and a stuck boot loop.

 

 

Back to Armbian, I tried copying the Devmfc file “meson-sm1-x96aira100.dtb” from the into the Armbian boot folder and configured “extlinux/extlinux.conf “ to look for the correct dtb. I renamed “u-boot-s905x3” to “u-boot.ext”. This did not boot, either.

 

I copied the contents of the entire boot folder from devmfc Debian Bookworm (v12) with Linux kernel 6.6.49 to the boot folder of Armbian Linux v6.6, overwriting "aml_autoscript", "emmc_autoscript", and "s905_autoscript". I edited “boot.config” to use “box=x96aira100” and set the variable “rd_img=uInitrd”. This boots into Armbian successfully enough that I get a command prompt on the HDMI monitor, and I get an IP address on the Ethernet port. After logging in by ssh and creating an Arbian account, I did uname to check the kernel version: “root@aml-s9xx-box:~# uname -a

Linux aml-s9xx-box 6.6.49-meson64 #19 SMP PREEMPT Thu Sep 5 00:58:55 CEST 2024 aarch64 GNU/Linux”

 

Of course I can’t update anything without breaking the system, and this kernel is lacking a lot of features I would like to use on a desktop system.  I could use some help trying to figure out a good way to get Armbian going on here.  I have the buildroot set up, and can compile my own image, but I'm not very familiar with how to patch it or to build a  different dtb.

Link to comment
Share on other sites

https://forum.armbian.com/topic/16976-status-of-armbian-on-tv-boxes-please-read-first

 

Note the comments in the above link that these boxes are not suitable for use as a desktop replacement.

 

https://forum.armbian.com/topic/33676-installation-instructions-for-tv-boxes-with-amlogic-cpus

 

Note the comment in the install instructions that if you have installed any other build, you will not be able to use the armbian builds without an android firmware restore.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines