Manel00 Posted August 23, 2017 Posted August 23, 2017 Hi everyone! That's getting me off... I though it was plug&play but didn't, Anyone can help me giving me the solution to this problem? Thank you very much Kind Regards
renaudrenaud Posted August 28, 2017 Posted August 28, 2017 Cant' exactly understand your question. Do you want to use the "TV OUT"? If yes, you have to add "tv" on the /etc/modules file and reboot. Do not forget: it is RCA or "composite" signal: usually on a TV the yellow RCA connector is for composite signal, the white for left audio channel and the red for right audio channel. Use an RCA connector and get tvout from pin 9 and GROUND from where you want. Use "tv" or "AV" or "Audio Video" on your TV.
Blast Posted August 28, 2017 Posted August 28, 2017 (edited) Or buy the cheap "hat", also breaks out other stuff for you, then you can use a jack-plug-to-AV which they also sell cheap.. I hacked an old cable to connect ground and pin nine (on 13-pin header, pin 1 is close to usb.. 2 is ground - Pinout picture ) as above said (also 7&8 +grounds to audio although current screen doesnt support it..)... Edited August 28, 2017 by Blast Just correction,adding..
Recommended Posts