`Hangs on boot to ash

[Herman Hoekstra]

Hello everybody,

My Box is a oxtagon shaped  t95z plus 2 mb 16 mb

chipset:

processor arm cortex -a53
mali T820 GPU
AP6255 wifi ac + bluetooth 4.2
sandisk SDINAD1F4-16G 16G emmc 16G rom
lanson L5TC4G63CFR x2 dram 2GB

 

I try to install armbian_community_26_2 _0-trunk.100 aml-s9xx-box_noble_current_6.12.63_cinnamon_dektop.img.xz

I use meson-gxm-vega-s96.dtb

And u-boot-s905x-s912.dtb copy and rename as u-boot.ext

It boots to ash then it stops

No asking for password and user

I have no clue what to do next

I have entered armbian-config but this returns a error

Any tips?

Edited yesterday at 08:21 PM by Herman Hoekstra
more info

[Herman Hoekstra]

Progress

I installed a command line image

Armbian_community_26.2.0-trunk.130_Aml-s9xx-box_noble_current_6.12.63.img.xz

This image let me boot to a promt asking me to set a root pw make a user and pw

Then it gives me a Prompt can use raspbian-config to make a wifi connection

But i have a overscan the prompt so i must type the first letters blind

I also miss the first letters of the answer

I cannot run xrandr to correct this problem

xrandr reports cant open display after the command

xrandr --listmonitors

Also how can i install and run a desktop on this system

Thanks in advance for a anser

 

Edited 1 hour ago by Herman Hoekstra

[SteeMan]

I'd recommend you ssh into the box, then you can configure to your needs.

[Herman Hoekstra]

Hello SteeMan

I can startarmbian-config but i cannot find where to change the display and install a desktop

It als displays the current is plucky is not supported or not listed

Thanks

 

Edited 1 hour ago by Herman Hoekstra